No hay artículos en el carro
No hay artículos en el carroBroca de router SpeTool
William Breckenridge
Comentado en los Estados Unidos el 14 de febrero de 2025
Bought this for a spare just to have on hand. The first one is still cutting well.
Nick M.
Comentado en los Estados Unidos el 9 de enero de 2025
I am amazed at how well these bits cut. We recently started cutting thin aluminum sheets on our CNC router (0.025 inches thick). We were having issues with our expensive, name-brand uncoated carbide bits loading up with aluminum and destroying the cut edges of the parts. I did a bit of research and came across mention of TAC coated bits being the best for aluminum. I decided to order one of Spetool's TAC coated 1/4 inch O flute upcut bits to test out. This bit has blown me away. I have never used a bit before that goes through aluminum so easily and cleanly. I have cut hundreds of feet of .025" anodized aluminum with the same bit, as well as some 3/4" MDF. It is still razor sharp with no visible wear on the edge or the coating. I am cutting it on a vacuum table, with no coolant and no air blast. I can grab the bit immediately after cutting up a sheet and the bit is cool to the touch. The large o-shaped flute never clogs and the surface of the bit is so smooth and slippery that not even painter's tape will stick to it when I run through a strip of it.I am running the 1/4 inch bit at 15,000 RPM and feeding at 60 inches per minute, step cutting parts out in two equal passes and have had no issues whatsoever. I'm sure it can go faster, but I did not want to push it on a project close to deadline. Oh, and it's about a third of the price of the bits we normally buy. Buy this bit. You will be happy that you did.
Katja Jobs
Comentado en Canadá el 29 de agosto de 2024
very reliable. It lasts for very long.
Bernard Lavoie
Comentado en Canadá el 29 de marzo de 2023
Cet outil fonctionne exceptionnellement bien dans l'aluminium, le polycarbonate, le bois et probablement tous les plastique avec un cnc router à 24000 RPM
Allan Roy
Comentado en los Estados Unidos el 3 de diciembre de 2023
Purchased to make edge lit acrylic signs. Cuts well and leaves a nice finish on the edge walls. There are better bits, but for the price these will do well for my use case (18000 rpm. 100 ipm, xy feed, 30 ipm. plunge.Quick delivery on Amazon (got to love prime).
Productos recomendados
Freud 12-096 - Broca recta de doble flauta de 15/64 pulgadas x 3/4 pulgadas (vástago de 1/2 pulgada)
Mex $622.94
Mex $ 317 .00 Mex $317.00
Mex $680.03
Mex $ 319 .00 Mex $319.00
Mex $366.00
Mex $ 164 .00 Mex $164.00
Mex $510.77
Mex $ 280 .00 Mex $280.00
Mex $5,749.01
Mex $ 1,881 .00 Mex $1,881.00