Hump1964
Comentado en los Estados Unidos el 16 de marzo de 2025
Worked as described. Fitment was excellent. Delivery was timely.
Customer
Comentado en los Estados Unidos el 26 de marzo de 2024
Works just as good as a high dollar unit. Works great. Only thing I would suggest when installed is get some blue loc tire to put on the threads. It will come loose. If you are not an archery brand name snob. It does the job! Very pleased and would buy again!
TSi
Comentado en los Estados Unidos el 24 de julio de 2023
I spent enough money on bow stabilization but I wanted a qd front stabilizer setup so I can easily get another bow into a bow case easily. I have also added side/back bars to my bow's and once you have one its hard to not have one on each of your bow's. I tried this qd front/rear qd mount and they have both performed well. They may not be as great as top of the line mounts but the price is great and the option to adjust the front bar angle I took advantage of. I found I'm more stable with the offset adapter on the front bar. This was a risk/experiment purchase and I am totally happy with the purchase.
Oscar Acevedo Jacinto
Comentado en México el 5 de junio de 2022
No le pide nada a productos de marcas reconocidas. Utilizado en arco compuesto excelente desempeño
Ricardo G.
Comentado en México el 3 de marzo de 2022
Excelente monoestabilizador ajustable para barra
Penjamin
Comentado en los Estados Unidos el 8 de julio de 2021
Product is good. Machining tolerances are good and the product works as advertised. It’s only a four star because it has no instructions what so ever for installation and setup. The info is easy enough to find elsewhere but the product should come with at least a basic user guide
Jouros
Comentado en los Estados Unidos el 25 de noviembre de 2019
For the money I thought it might not hold up. I was wrong. It can. It says in position for the back bar mount with 0 issues. there was one review that said the user had to tighten it up every so often. I'm not sure what part they were talking about but I'm assuming it was the back bar mount for pitch and lean. I have had 0 issues though. I make sure I get it super tight though. When it comes to mounting the actual mounts to the riser I use rubber washers in-between the mount body and the riser and in-between the screw head and the mount body that way they get a good bite when I tighten them down and they don't scratch the riser or mount body. The quick disconnect works super well thought they do sit a little high unless you pay attention to where the hole was drilled for the stabilizer to screw into disconnect if you look at my 3rd picture ill see its not centered. They did this cause they don't have a small little circle seat in the bottom for it to settle in so you gotta get use to making sure you set it in high side up. Not a big deal and not worth taking a star away. Overall I really like this mount, Much cheaper then most of the name brands (unless you buy used) and works just as well.