No hay artículos en el carro
No hay artículos en el carroSoporte de brazo lateral que cuenta con una desconexión rápida integrada para las barras delanteras y traseras, fuerte, simple, ligero y fácil de desmontar para el transporte.
Tony
Comentado en Canadá el 10 de mayo de 2025
Good quality works well. Very happy
Bryan
Comentado en los Estados Unidos el 23 de febrero de 2025
As described and good quality. Down side is the metal that makes the quality so good makes little heavier and weighs line some. If shorter tight lines probably okay but on long ones I ended up getting plastic ones local in 2pk for same cost. Not worth return and good spare.So overall good item but keep in mind the weight and potential impact.
Newlin Mc Master
Comentado en los Estados Unidos el 1 de diciembre de 2024
I've owened this product before, it's a 5s tar product. I like the quick disconnect design better than my Conquest stabilizer setup.The open box item I purchased is missing both beestinger nuts that sleeve into the quick disconnect. The first picture shows how it doesn't align with the mounting point. I'm sure this is not a beestinger component. The second photo shows how it should align to the center of the mounting point with beestinger components. I'd say it's safer to buy new on this one.
Jeidi Tri A
Comentado en Canadá el 4 de octubre de 2024
It easy to read because of the grove , you can see the bubble on eyelevel not only on top, Small design (Lighter, sagging of line can be minimize, and one thing most i like is the hook, not easy be removed even the line is bouncing.
John E. Stinson
Comentado en los Estados Unidos el 29 de abril de 2024
Great, simple level - no frills, just a level.
jRgmDz
Comentado en México el 28 de octubre de 2023
De manufactura de acuerdo a su precio calidad, cumple, el material parece de una lata de bebida, plástico como el de la cubeta de mi taller, es suficiente.
Barry
Comentado en Australia el 8 de noviembre de 2021
The product was useless because it is not level.
Customer
Comentado en Canadá el 18 de febrero de 2019
Detents make adjusting and locking this unit in place very easy and strong.
Trebeks_mustache
Comentado en los Estados Unidos el 17 de diciembre de 2019
I was shooting groups that I was less than thrilled about for the last two months or so, I figured I would give this a try along with my bee stinger stabilizers I had. This is awesome, it came with everything needed to have a complete front a back stabilizer minus the stabilizers themselves. I use a BS 10" maxx stabilizer on the front and an 8" BS hunter on the back. I have about 6 ounces of the weights on the back stabilizer and 2 ounces on the front one. This combo has really allowed me to hold my bow steadier. I was shooting some awfully tight groups tonight once I got my bracket installed. I would highly recommend this for anyone looking for tighter groups. I'm very please with the design and ease of installing and removing the stabilizers. It takes only a few turns each and the bow is ready to fit in any bow case.
Customer
Comentado en Canadá el 23 de agosto de 2016
I bought this so i could add a back bar to my Hoyt Defiant Turbo. I couldn't be happier with this side bar mount. It lock down tight to the bow and has never moved. The angle adjustments have groves on the inside to match the graduation lines, so it kinda clicks in, which makes it easy to adjust the vertical and horizontal angle of the back bar. Both angle adjustments are solid, neither one moving or coming loose in the month I've been shooting with it. The hardware is stainless steel, the finish is perfect and the quick disconnects are aluminum to shave weight and only go in way so you won't tighten it down and end up with the decal upside down on the wrong side.I'd highly recommend this back bar mount, I have yet to find a single problem with it, and the back bar has my bow holding rock solid.
Chris Meadows
Comentado en los Estados Unidos el 29 de octubre de 2015
Initially I made a mount out of flat steel to see if I liked having a stabilizer on the side of my bow. I did and ordered the adjustable QD side mount which gave me a surprising amount of fine tuning adjustability. I am running a 6 inch be stinger on the side of my Hoyt carbon Spyder and no stabilizer in the front. It looks weird, is non traditional and works extremely well. Try it you may be surprised at the results. The build quality of the product is great and the QD functions simply and quickly.
Productos recomendados
Mex $456.70
Mex $ 232 .00 Mex $232.00
Mex $286.00
Mex $ 128 .00 Mex $128.00
Mex $636.44
Mex $ 286 .00 Mex $286.00
Mex $1,400.18
Mex $ 672 .00 Mex $672.00
Mex $877.06
Mex $ 412 .00 Mex $412.00
Mex $522.30
Mex $ 245 .00 Mex $245.00