No hay artículos en el carro
No hay artículos en el carro
El amplificador es 30-4000MHz (40dB) amplificador, con la característica de un gran rango dinámico. Adecuado para la amplificación de ganancia fija de señales de RF. Este amplificador tiene un amplio rango de frecuencia, FM HF VHF/UHF. Ampliamente utilizado en onda corta, radio FM, receptor de control remoto, amplificador de señal de TV por cable, navegación por satélite GPS. Este módulo de amplificador de banda ancha RF ganancia estabilidad, es 40dB.
Especificaciones:
Frecuencia de funcionamiento: 30-4000MHz
Ganancia del amplificador: 40dB
Potencia de salida máxima: + 20 dBm (100 mW) @ punto de compresión de 1 dB.
Corriente de funcionamiento: 135 mA (5 V)
Voltaje de alimentación: 5VDC
Impedancia del : 50 Ω
Peso: 8 g.
El paquete incluye:
1 x 30-4000MHz 40dB Ganancia Amplificador Módulo
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Jade
Comentado en los Estados Unidos el 16 de febrero de 2025
Very nice clean circuit boards.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
Dan
Comentado en los Estados Unidos el 25 de agosto de 2023
When connected to 5V the PCB draws 120mA, when RF signal applied at 150MHz current draw drops to 60mA. RF single strength drops 30dB and is not amplified. Either I received bad board or bad design. Unable to find a data sheet on the mentioned SBB5089Z. No information included with part. Product does not work as advertised.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
GadgetsNgoodies
Comentado en los Estados Unidos el 30 de julio de 2023
I bought 2 of them and tested them with 2 different instruments the R3465 spectrum analyzer with tracking generator and the liteVNA64 There was a 50dB DC to 18Ghz attenuator in the input to make sure the amplifier was not driven into saturation.The amplifiers did not make the published spec of 40db at 4Ghz. That is the only reason it has only 3 stars.The highest gain is 50db at 5Mhz, then it becomes flat with 41 db to around 550Mhz, 1Ghz 40db, 2Ghz 35db,3Ghz 32db, 4Ghz 27db, it does have gain at higher frequencies, 5Ghz 25db, 6Ghz 22db, 8Ghz 14db. Both amplifiers agree within +-2db. The reverse isolation at 1Ghz (my frequency of interest) is 34db.
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Bryan Rogers
Comentado en los Estados Unidos el 6 de octubre de 2023
Mt t mobile home 5 g needed a boost and it helps added a usb port for charging/ power supply and it works also plenty of info out there on how to
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Joseph Holt
Comentado en los Estados Unidos el 7 de noviembre de 2022
Little amp but really pulls in the signals!!!!
Productos recomendados
Mex $423.55
Mex $ 232 .00 Mex $232.00