Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Taiss Alicates De Crimpadora De Alambre De Trinquete Con Kit De Conector Dupont De 600 Piezas, Kit De Herramientas De Crimpado Dupont Sn-28B, Carcasa De 2.54 Mm, 1/2/3/4/5/6/7 Pines, Conector Dupont Macho

Envío gratis en pedidos superiores a Mex $600.00

Mex $454.24

Mex $ 236 .00 Mex $236.00

En stock

Acerca de este artículo

  • Nombre del producto: alicates de crimpadora de alambre y kit de conector Dupont; espacio entre conectores de pines: 2,54 mm; modelo de herramienta de crimpado Dupont: SN-28B; AWG28-18 (0,25-10 mm²).
  • Los alicates de crimpadora de alambre de trinquete están hechos de acero al cromo vanadio de grado industrial, impermeables, a prueba de herrumbre, resistentes a la corrosión, fuertes y duraderos, y el mango está hecho de nailon. Larga vida útil.
  • El juego de conectores de cabezal de pines de 600 piezas está hecho de plástico y metal, buena conductividad duradera, no es fácil de dañar, fácil de usar e instalar.
  • Ampliamente utilizado en: comúnmente utilizado en bricolaje electrónico, placas de circuito, altavoces, placas de carretera, electrodomésticos, iluminación, industria, productos electrónicos, etc.
  • Empaquetado del producto: alicates de crimpadora de alambre SN-28B + conector de carcasa de 1 pin y 2 pines cada uno, 30 piezas + conector de carcasa de 3 pines, 4 pines, 5 pines, 6 pines y 7 pines, cada 20 piezas + conector de cabezal de pines macho de 160 piezas + conector de cabezal de pines hembra de 270 piezas cada uno + 10 piezas de 40 pines Cabezal de pin de PCB de una sola fila + caja de plástico.


Pinza de crimpadora de alambre de trinquete, kit de conector de carcasa de clavija de 2,54 mm y conector de cabezal hembra macho. Espaciado de clavijas: 2,54 mm. Encabezamiento.


Ulysse Borris
Comentado en Canadá el 4 de marzo de 2025
Nice
Brett
Comentado en Canadá el 6 de enero de 2025
Had a really small connector pin come apart and this kit had the one i needed
Stacey Crockett
Comentado en los Estados Unidos el 25 de mayo de 2024
First thing first - the case does NOT have any dividers, but that said, it's laid out fine. The tool comes packaged separately and is not the same manufacturer of the connectors (or at least it seems.) Quality seems fairly decent as a novice like me can figure it out fairly quickly. The tool is a bit sticky out of the package, but silicone oil clears that right up. Release mechanism is awkward but usable. The really large downside for most buyers would be instructions or lack thereof. I have an idea of how they're supposed to be used, so I brought out some scrap wire and did a total of 3 male and 3 female connectors and by #3, it was satisfactory to me, they stuck in the connectors and accepted their gender opposite. I plan to use this to mend a couple of connectors on fans and various other 3D printing parts.If you look in the die, there is a ridge. With the jaws facing down (downward angle with the tool in your hand) and the jaws fully opened, look in the left side of the crimpers. On all 3 slots, you should see a ridge halfway across the die. This is the ridge where you need to seat the two, first sharper wings. You need to SLOWLY crimp the tool together while gently positioning the connector. I found that it may help to GENTLY squeeze the larger wings a TAD closer together. Once there is resistance in the crimper (on the connector) then you can tug from the RIGHT side of the crimpers and slide the connector in to fully seat on that ridge. Make sure you understand how that ridge interacts with the connector or you have a huge chance of scrapping the locking mechanism that secures the connectors in the black ends. This is what I did on the first two. I watched a quick video and found the ridge. My next 2 connectors (one male, one female) were perfect. I found that for the size of the connectors and the size of my wire that the MIDDLE die slot is perfect. I got an excellent crimp, proper wire retention and proper stripped wire length. Look for a video with "macro" in the title to get a GREAT view.Overall, I was initially not too pleased with my purchase but it turns out that I was the actual problem. My bottom line is that, if you're ordering this kit, you're probably NOT a general novice. If you ARE a general novice, check the proper reviews to get a taste of what you need to make this kit work for you. If you're looking for a fairly cheap DuPont kit for your tinkering needs, this is a fine specimen. The tool itself is worth the cost in my opinion. I may add pictures if I can, but possibly not.
jedco
Comentado en los Estados Unidos el 29 de diciembre de 2024
An inexpensive tool that I use rarely. But works great when needed.
Squirtle
Comentado en los Estados Unidos el 1 de diciembre de 2024
I had done hundreds of crimps with a wire stripper and linesman pliers. I can't believe I ever did that now that I have used this. It makes the crimps so much stronger and is sooo much easier. For the price this still feels very high quality. The crimps aren't super high quality, but in most applications, that isn't an issue. The tool is what you are really after here and that is seemingly high quality.
Productos recomendados

Mex $942.49

Mex $ 508 .00 Mex $508.00

4.8
Elegir

Mex $1,540.86

Mex $ 739 .00 Mex $739.00

4.8
Elegir

Mex $346.88

Mex $ 159 .00 Mex $159.00

4.6
Elegir