Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Objetivo de Microscopio 100X, Piezas de Microscopio, Material de Aleación de Aluminio y Latón, Lente de Microscopio con Estructura de

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,051.44

Mex $ 578 .00 Mex $578.00

En stock

1.Nombredelestilo:R7 Reverb X2


Acerca de este artículo

  • 100X: este es un objetivo de microscopio de 100X, ¡verifique para una mejor experiencia de uso! Un reemplazo ideal para las partes dañadas.
  • INVESTIGACIÓN DE CÉLULAS FÍSICAS QUÍMICAS: el objetivo en el microscopio se puede usar para estudiar y observar la estructura cristalina y la morfología de materiales y compuestos, lo que ayuda a estudiar química y física; Se puede utilizar para estudiar el comportamiento de los organismos en diferentes entornos, como el movimiento celular y los cambios morfológicos de la membrana.
  • MATERIAL: El objetivo 100X está hecho de material de aleación de aluminio y latón de primera calidad, este objetivo es resistente a la corrosión y a las caídas, lo que garantiza una larga vida útil.
  • INVESTIGACIÓN DE MATERIALES: el objetivo en el microscopio puede detectar la estructura y los defectos de los materiales, lo cual es útil para la investigación en los campos de la ciencia e ingeniería de materiales; La observación de la estructura y composición de fibras naturales y artificiales, acero, cerámica y otras sustancias es útil para la inspección y mejora de la calidad en la industria manufacturera.
  • TAMAÑO RMS: El tamaño de la interfaz de la rosca es un tamaño RMS estándar internacional y se pueden utilizar la mayoría de los microscopios biológicos profesionales del mercado.



Nickolas A.
Comentado en los Estados Unidos el 29 de diciembre de 2024
Been doing floating shelves and this tool with the guide works great. Helps make some really striaght cuts.
JOHN W PATTERSON
Comentado en los Estados Unidos el 3 de noviembre de 2024
I bought the Saw Guide after watching a Stumpynubs video. The model that was demonstrated had been revised to a new form. I attached my circular saw to it per the instructions. When i set the saw and guide on its side, i saw the saw move within the guide. I tried several times to better secure the saw in the guide. It did not work. So, i started contacting Bora, first by the Amazon link, then with no response I called their help line and no one answered even after several calls. I then chatted with their rep, who apologized at their system was down and he could not help me but would get back to me. So far, i have received NO responses to the problem. This has been weeks now. I do not recommend that anyone buy this saw guide.
Boo Mullarky
Comentado en los Estados Unidos el 19 de noviembre de 2024
Easy to get your saw in and out. Fits in like a glove with the Bora NGX rail. Moves smoothly along the rail and guides straight. Much, much better system than the Kreg Accu Cut. Great alternative to expensive track saw systems. I also recommend the Bora Router Guide that you can use with their rails. Cut many superbly accurate dados with that one.
Pat
Comentado en los Estados Unidos el 18 de noviembre de 2024
It would but just barely. It is very director to get my Milwaukee saw into the guide because the guide is just barely large enough also alignment is so so
Joel bg
Comentado en México el 15 de enero de 2024
Excelente plantilla se adapta muy bien a la guía que compré de la misma marca recomendable
The Deleted User I/O
Comentado en los Estados Unidos el 17 de julio de 2023
I wanted to share my experience with using BORA tools recently. Overall, I have been very impressed with the products they offer. However, I believe there are a few areas where improvements can be made.Firstly, I feel that BORA tends to release their products too early in the design phase. This can make it difficult to determine which item is the newest model, as they frequently change and upgrade their products. For instance, when I purchased the first item, 544001, it was good, but I encountered an issue with it not accommodating the newer battery-powered circular saw. The battery blocked the rear clamp from engaging and being grabbed by hand. As a result, I had to return that item and purchase a different one that worked with my circular saw. I'm happy to say that this particular model worked wonderfully, although I did face some challenges with the rails. Thankfully, BORA quickly sent out a solution based on my suggestions, which resolved the issue. After applying the new parts, I had no hassle and the tool worked like a charm.While I appreciate the responsiveness of the company to inquiries and their willingness to listen to customer feedback, I do believe there is room for improvement. Specifically, I think the design could have been sturdier and could benefit from some sort of frame to enhance stability during setup. Additionally, I found the setup process itself to be quite challenging, partly because BORA lacks comprehensive instructions for their products. These factors are why I have deducted one star from my rating.Despite these shortcomings, I genuinely believe that BORA is a promising company and is heading in the right direction. They are receptive to feedback and even implement changes if they make sense. Granted, they may be a younger company, but they have the potential to grow and improve. I fully support them and look forward to reviewing more of their products in the future.For those considering purchasing a BORA tool, I recommend thoroughly examining their full lineup to ensure compatibility with your particular model saw. In my case, I used a RIDGID 18V BRUSHED 6-1/2 IN CIRC SAW (Model Name: R8655). Unfortunately, it did not work with the first model (544001), but it did work with the one I eventually purchased here.Thank you for your attention, and feel free to reach out if you have any questions or need further clarification.
Productos recomendados

Mex $1,177.32

Mex $ 576 .00 Mex $576.00

4.3
Elegir

Mex $2,796.39

Mex $ 1,202 .00 Mex $1,202.00

4.7
Elegir