No hay artículos en el carro
No hay artículos en el carroArnés de contacto principal 12 AWG - Pin 30, Pin 87, Pin 87a40a / 30a capacidad de conmutación alta 12 AWG Ventas 87a Amarillo 12awg Pin 87 Azul 12awg Pin 30 Red 16awg Pin 85 Negro 16awg Pin 86 Especificación blanca: voltaje de la bobina: corriente de la bobina DC de 12v: voltaje del interruptor de 160 ma: corriente nominal de 14v dc: - No 40a 14v DC - NC 30a 14v resistencia de contacto inicial de corriente continua (6vdc 1a): resistencia de aislamiento inicial máxima de 50 m: resistencia dieléctrica inicial mínima de 100 m (dc500v): - entre contactos cortados: ac500v, 50 / 60 Hz 1min. - Entre la bobina y el contacto: ac500v, 50 / 60 Hz 1min. Durabilidad (operación): - mecánica (a 7.200 / h): 10.000 - eléctrica (a 600 / h): 100.000 contenido del paquete: 5 x 5 Pines spdt Relay and HARNESS HARNESS please note: - incluyendo instrucciones fáciles de instalar - por su seguridad y la de los demás, deje que los profesionales y técnicos instalen el equipo.
Hector
Comentado en México el 22 de enero de 2025
Funcionan al 100
Customer
Comentado en México el 9 de agosto de 2024
Hasta el momento funciona bien pero no traia fusibles.
Elena Cortés
Comentado en México el 22 de agosto de 2024
Funcionó perfectamente para mi proyecto
Faustino
Comentado en México el 30 de junio de 2024
Para adaptaciones buenos resultados
JRY
Comentado en Canadá el 1 de mayo de 2024
Excellent
MELCHOR RODRIGUEZ VAZQUEZ
Comentado en México el 26 de marzo de 2024
Muy rápida entrega
SunniMix buyer
Comentado en México el 17 de septiembre de 2024
Los relé son de gran utilidad y el contar con base ayuda a mucho a su instalación.
Jose
Comentado en México el 1 de marzo de 2023
Son exenlentes para conectar faros y ventiladores en el auto y son muy buena calidad vienen sellados para protegerse de la humedad
Hassan ali
Comentado en Arabia Saudita el 18 de abril de 2023
ليس كما في الوصف
Scott594
Comentado en los Estados Unidos el 9 de marzo de 2020
I'm an electrical engineer, and have had more than a couple of relays apart in my 40+ years in the business. I generally dissect dead ones that I replace to learn what caused the failure when time allows. Because of this I have a pretty good idea what to look for in a quality (or not-so quality) relay.I disassembled one of these (needed the base to build a piece of test gear), and found they are well made relays.Here is what I found (photos attached) - real copper coil windings on a plastic insulated spool, adequate sized contacts, completely sealed with generous amount of adhesive at each pin and around the perimeter of the cover. The braid which connects the moveable contact is made from heavy guage fine strand copper, is made from REAL copper (no cheap "CCA" or copper-clad-aluminum - avoid this stuff at all cost - it's junk), and is welded on at both ends, not crimped. The frame is heavy guage plated steel with a phosphor bronze leaf spring (non-current carrying for long life) These look like they will last a long time in a rough enviroment (like a boat or undercar). Use a little silicone dielectric grease on the pins when installing and you should be good for years. The tabs are tin plated brass, not cheap steel which is resistive and tends to rust. I should point out that this part number doesn't include a noise suppression diode or resistor, and shouldn't be used where the old relay was so equipped, or in a new installation without adding this protection to the socket. The noise spikes generated by the coil when any unprotected relay turns off can interfere with or even damage sensitive electronics in nearby circuits. if you're new to this sort of thing, a quick search online will explain the noise supression thing.Hope this helps, time precludes a lot of reviews, but I like to do good ones when I decide to. In this case I felt the product worthy, and it was indeed a surprise what I found inside a "cheap auto relay".All in all good quality relays, the Nilight 50043R 10pack is an outstanding deal at it's price point and with a 2 year warranty, I would suggest these are the relay to stock for anyone doing Marine, Auto or Truck repairs and installations.
Cliente de
Comentado en México el 16 de septiembre de 2020
Tienen calidad y buen precio
Handy
Comentado en los Estados Unidos el 6 de julio de 2012
I bought this relay to put on my Chevy Truck for some new 10" Electric Radiator fans. I live in the Desert and it gets pretty hot around here. When I run the AC at an Idle the AC was struggling. So I added these fans and I needed a good relay to handle the amps and not get wet. This relay does the trick. So far I have had no problems and the AC works like a charm. One thing I did notice is that the picture shows a metal bracket and the one I got was just plastic. I would have preferred one with a metal bracket but oh well. Other than that it does what it should. I hope it last as only time will tell.UPDATE 9-9-13: Well it has been a year and this little relay is still going strong. Arizona heat has nothing on this relay.....UPDATE: 1-1-2015 So here we are over two years and this thing still rocks.
Faris Abu Zaitoun
The good thing about it it have a built-in fuse which make life easier, and a relief of the wiring hassle. So far no issues with the relay.
Productos recomendados
Mex $549.00
Mex $ 269 .00 Mex $269.00
Mex $3,561.43
Mex $ 1,460 .00 Mex $1,460.00
Mex $396.07
Mex $ 182 .00 Mex $182.00
Mex $518.65
Mex $ 238 .00 Mex $238.00
Mex $879.00
Mex $ 439 .00 Mex $439.00