No hay artículos en el carro
No hay artículos en el carroLijadora de correa, tamaño de la correa (pulgadas): 3/8 x 21 pulgadas, 980-5600 sin carga SFPM, 4.4 A amperios @ 120 V, rodamientos de bolas, cable 16.4, tipo de liberación de palanca, lijado de pared empotrada, correa de seguimiento automático, bajo ruido, peso de la herramienta (Lb.) 3.5 libras, longitud de la herramienta (pulgadas): 16-1/2 pulgadas, incluye bolsa para el polvo, cinturón de lijado
JH
Comentado en Alemania el 16 de marzo de 2025
Schleift gut. Stabiler Bandlauf. Bereits einige Tage intensiv in Benutzung.
Eli
Comentado en Italia el 22 de junio de 2024
Ottimo prodotto, funziona benissimo e la carta abrasiva non si strappa e non scende dal rullo...avevo anche un prodotto più economico, ma bisognava continuamente cambiare la carta perché il rullo la strappava. Consigliato
GERARD
Comentado en Francia el 26 de abril de 2024
livraison très rapide emballage sérieux, article conforme a ma commande dommage qu'il n'y a pas de coffret pour la machine, vu son prix, machine reçue avec 2 bandes de ponçage pas tres généreux chez Makita! sinon très bonne machine, ,enregistrez vous sur le site MAKITA pour avoir une extension de garantie c'est gratuit!!
Timothy
Comentado en el Reino Unido el 27 de febrero de 2020
Had my doubt about this. Firstly hadn't heard of it, and was cautious about it achieving a genuine result. Having watched a few video's regarding it's abilities, I began to have some trust in it. It was also becoming obvious, this was one of the better one'sSo far I'm very pleased with it's results, and it certainly has no issues, doing what I require.I'm involved in metal and wood. Dealing with square metal tubing, there's an inner ridge which remains, from where it's welded together. Although that ridge. is very small, approx. 1/2mm, x 1/2mm it's still a ridge, and stops other steel from sliding inside. This takes that ridge out with ease. It only goes inside a few inches, but that's all I require.So yes, so far, I'm very impressed with what it's capable of, and it has helped solve, a lot of issues when working.One side note. It doesn't require much pressure, for delicate work, as it's capable of going through material, which is what it's designed for.As I commented in the heading, it's designed for difficult to reach places, with other similar tools.
jtl3
Comentado en los Estados Unidos el 26 de noviembre de 2020
Gets into nooks and crannies for rebuilding tabbing and sanding down glass like no other. Stick some 40 grit belts in and this thing devours fiberglass like nothing else. Like -- you can plunge through it! Amazing tool, you can run it flat out for hours and it doesn't care. Also great for metalwork. Hard to create perfectly flat finishes but there are some different techniques including gliding the tip back and forth left and right. Tracking adjustment works very well. Poor torque at low speed but that is to be expected without closed loop speed control. Many material removal rates possible depending on pressure applied (as little as the weight of the tool), grits, and speeds. Fantastic for deburring metal parts. All around -- pricey but worth it. Made several projects this layup season not only easier but frankly possible. I don't know what other tool I could use to get into some of these little spots. A little slower than absolutely top speed seems to be the sweet spot for most tasks between noise, heating, control, and material removal rate.
Productos recomendados
Mex $3,830.18
Mex $ 1,723 .00 Mex $1,723.00
Mex $1,720.00
Mex $ 808 .00 Mex $808.00
Mex $2,751.50
Mex $ 1,183 .00 Mex $1,183.00
Mex $1,192.00
Mex $ 584 .00 Mex $584.00