No hay artículos en el carro
No hay artículos en el carrojuan carlos olvera
Comentado en México el 11 de diciembre de 2024
buen producto, con el paso del tiempo veremos que tal salió, por el momento está funcionando perfectamente y se ve de buena calidad en sus materiales
Erick
Comentado en México el 2 de marzo de 2022
Lutron es una marca lider en sistemas de paneles de iluminación, este atenuador es muy bueno, pero no incluye su placa solo es el atenuador, deberian de vender el paquete completo, interruptor con su tapa
Miguel Alarcon
Comentado en México el 6 de enero de 2021
Tenía el atenuador que no funcionaba con focos led y lo cambié por este y ya puedo usar focos led.
Chelles
Comentado en los Estados Unidos el 8 de noviembre de 2018
I installed this myself. Very easy for anyone doing it for the first time. Works well with LED bulb. I tried it with an incandescent bulb but it made a terrible high pitched whining noise. This could just be because I live in an old apartment with garbage wiring.What I love the most? Absolutely NO light flickering when turning on other things such as the heater/AC. That was driving me crazy with my old incandescent dimmer.
Steve L.
Comentado en los Estados Unidos el 26 de septiembre de 2018
I've installed several of these dimmers in our home, in both one and two dimmer configurations. They are both attractive and functional, and they allow you to use multiple dimmers on a 3-way circuit without any rewiring. They work well with both incandescent bulbs, compact fluorescents and LED lights that are dimmable, and provide the fullest range of dimming I have seen with these types of bulbs. They come pre-programmed to bring lights to full brightness quickly, and to turn lights out by slowly dimming them, allowing you to see where you're going even after turning out the lights. A pair of small buttons allow you to set the brightness level, and that level will be maintained even after a power failure. Double tapping the switch always brings it back to full brightness, however, which is very convenient.Every aspect of how these dimmers function is programmable, from ramp-up and ramp-down times to dimming modes. However, the programming sequence is not at all intuitive, so most people will undoubtedly use the default program. Programming involves tapping specific buttons in a specific sequence - it's a bit like programming some cars or resetting the check engine light, where you may have to turn the ignition on, then off, turn on the left turn signal and blink the headlights twice.One thing that may not be clear from the instructions is that you are not limited to using only one companion switch with this master switch. If you have the wiring for it, you can wire several companion switches in parallel, all of which can control the same light. There is also a version that includes two dimmer switches in one unit, which is very handy when space is limited.One caution is that these are electronic dimmers and they need a small amount of power to function. That power comes from current flowing through the circuitry, even when the switch is off. It's difficult to find in the instructions, but they require a minimum 40 watt load to function. That's no problem with an incandescent bulb, but many LED's use much less than that. For example, a light fixture that has two 1600 lumen bulbs (equivalent to 100 watt incandescent bulbs) may use as little as 26 watts. In theory, that's not enough for these dimmers to function. Sure enough, I had a light with three 5000 lumen bulbs, each using only 7 watts. It wasn't enough for the dimmer to work. However, when I replaced the bulbs with 800 lumen bulbs, each using 9 watts, the dimmer worked without any problems. So it would appear they can function with anything above 25 watts or so, but the stated minimum is 40.Finally, a word about intelligence. Lutron was the original manufacturer of mood lighting, with multi-zone dimmers, each controlling multiple lights and with programs that, with a single button, allow one to set a bunch of lights to specified levels simultaneously. The Maestro is not one of those. These are not smart dimmers and they can't be controlled by Alexa, or via the Internet. You can't even use an app to control all of your dimmers from your smart phone. These are also a lot less expensive than smart dimmers, and they're a lot less confusing to the uninitiated. When your mother-in-law visits, it won't take her any time at all to figure out how to use one of these that controls the dining room lights. With a smart dimmer, it might take some time to learn which button to push, or to say, "Alexi, set lights for dinner." Furthermore, there's no danger that these dimmers will ever be hacked the way a smart dimmer can be. After all, smart devices usually have almost no security and there have already been cases of people 'gas-lighting' their ex-spouses remotely to drive them nuts. No such worries with these switches.Simple, elegant and highly functional - what more could you want?
Paul S. Remington
Comentado en los Estados Unidos el 14 de enero de 2016
I was a little hesitant to purchase this style dimmer switch. I'm used to the dimmer switch that has a slide-control function. But we're very happy with the performance of this switch.This Lutron Maestro CFL/LED digital dimmer switch was installed for a new LED track light. It worked perfectly and was easy to wire up. The functionality is excellent. The switch has dimming presets compared to the infinite level of presets you get with a slider control. With this switch you get on and off and seven settings in between. Regardless of the lack of infinite control, I've grown fond of this dimmer. The quantity of presets work well for our use, and I like how it controls the light. It doesn't abruptly switch between levels or on and off. It softly changes the level up or down or on and off with the light level changing slowly. It also works perfectly with our LED lights.Be sure to purchase dimmable CFL/LED lights. The switch has to be rated as LED dimmable as do the lights. As long as you've purchased dimmable CFL/LEDs, this switch should work fine.
Sal Fanale
Comentado en los Estados Unidos el 22 de mayo de 2015
I purchased this Lutron Maestro switch as a substitute for the Lutron DIVA I tried previously. I replaced the bulbs in my track lighting fixture (http://amzn.com/B005D86XBE ) with LED bulbs (http://amzn.com/B00LGZCVSW ) and found that with the DIVA, there was still noticeable flickering no matter how I adjusted the dimmer low limit. This Maestro switch solved that.PROS:~ As with the DIVA, the MAESTRO switch came with EXCELLENT instructions. I really mean excellent. Lutron includes clear pictures, good descriptions, and enough information for even a DIY customer to install the switch themselves.~ They also include extras like 3 wire nuts and the small jumper cable you might need depending on your switch layouts.~ Functionally this switch works perfectly. I can dim the GU10 LEDs down to a pretty low level without any flicker. To accomplish this, I had to follow the directions and adjust the minimum dimmer level higher until the flicker went away. Even with the adjustment, the lowest level is still pretty low.~ Lights fade in and out. This is also adjustable, which means in total, you can adjust the high and low dimmer limits as well as the time it takes for the lights to fade in and out. Personally, I don't need much adjustment there, but if you are picky, you have options. Better to have them and not need them!~ Comes with the push in style wiring. I choose NOT to use the push in connectors because I think they tend to loosen over time and that might lead to an arc or worse. Most good electricians will opt to use the screw terminals over the push in connectors for that exact reason. Its your choice, but I picked the confidence of the screw terminals.CONS:~ The only thing I can say against this switch is that, like the DIVA, it requires a deeper gang box. Its similar to the size of an old GFCI outlet and so you just need to account for that. It will be a reeeeaaalll tight squeeze if you are trying to stuff this into a shallower remodel box.EXTRA:~ For me this isn't a PRO or a CON, so it went here. The maestro switches use momentary buttons instead of a toggle or rocker switch. The momentary button does have a nice confident click and the nice a thing is you can click the top or the bottom of the switch and will still turn the lights ON if they are OFF or vice versa if they are already ON. Basically all you need to do is slap any part of the switch and it will do what its supposed to.~ If you are going to wire this switch as a three way using a regular mechanical switch as the other switch, you need to make sure you read all the way through the directions and rewire the mechanical switch as indicated. If you fail to do this, the three way circuit behaves very strangely due to the electronics in the Maestro switch.SUMMARY:If you are doing any remodeling or installation with LED lighting, this is a good switch to try out. Since it costs roughly the same as the DIVA you can decide which style of switch you like better, a rocker or a momentary with fade. I think its personal taste unless you run into a situation like me, where the DIVA switch wasn't functioning properly and so you might need to try this Maestro.
Canadian Jim
Comentado en Canadá el 26 de febrero de 2015
I love this dimmer. I have changed to LED lights in most rooms at home, and this dimmer has worked flawlessly with all of them. You can program the dimmer's range so that at the low light setting, it matches the minimum output of the LED lights that you are using. A single click of the large "button" will turn the light on to the last set brightness - a double click will set the brightness at maximum - and another click will turn it off - the lights dim as they go out.I originally bought one and have been gradually switching out anywhere I had a dimmer switch.
Productos recomendados