No hay artículos en el carro
No hay artículos en el carroCinta de agarre transparente de agarre LUCID
Nuestro agarre extremadamente transparente fue diseñado para permitir que la hermosa superficie de tu tabla se muestre. Ya sea madera, fibra de vidrio, metal, cerámica, lo que sea, nuestro producto prácticamente se adhiere a casi todas las superficies limpias acabadas.
VARIACIONES DE CINTA DE AGRAJELigero: ¿montar descalzo a la playa? Este es tu agarre. Sigue manteniendo el control con facilidad, pero no sudes por cortar tus pies.
Mediano: esta es la cinta de agarre estándar de la industria. Monopatines, longboards y cualquier cosa intermedia. No puedes equivocarte con nuestro agarre más vendido.
Resistente: se utiliza casi específicamente para longboarding cuesta abajo de alta velocidad para la tracción adicional. A lo largo de los años hemos encontrado, de nuestros increíbles clientes, que también tiene una gran cantidad de usos industriales, incluyendo alas de aviones, cubiertas de barcos, pisos de tienda, garajes, cualquier superficie a la que quieras agarrar.
Líquido transparente de Lucid
Nuestra cinta de agarre es un polímero de emulsión acrílica dura a base de agua que exhibe excelentes propiedades antimanchas y resistentes al agua. Nuestra capa superior acrílica transparente a base de agua, no amarillenta, es adecuada para casi todas las superficies terminadas.
Lucid's Clear Liquid contiene agentes coalescentes, niveladores y desespumantes, por lo que es un producto totalmente formulado, transparente a base de agua.
Este producto se puede adelgazar con agua y forma un excelente acabado que se puede volver a revestir en 30-60 minutos.
El líquido transparente de Lucid forma una película dura resistente a las manchas que tiene una claridad excepcional.
Características clave
chamarra transparente brillante
Cumple con COV
Versatilidad de formulación (sellador y capa superior)
Secado rápido, fácil lijado
Simplemente se limpia con agua.
El paquete incluye:
Paso 1 "El líquido" - Botella de 2.5 onzas
Paso 2 "El agarre" - Botella de 2.5 onzas
cepillo para polvo de espuma
Instrucciones
calcomanía Lucid Grip
Contiene 1-5% fosfato de tributoxietilo.
Contiene 1-5% dipropilenglicol monotetil éter DPM
Shawn
Comentado en los Estados Unidos el 4 de noviembre de 2024
Great product to use for pickleball pad. in order to regain the grit. Just make sure you do a tester paddle. first before you try it on the paddle the you want to use. I added a bit too much glue and sand on my first attempt. Didn't like how it came out. On my next attempt, I will use less glue and sprinkle less sand on the surface. I don't think you'll need much to establish a sufficient grit.
ToiHouse
Comentado en los Estados Unidos el 16 de septiembre de 2024
This saved me money. I have a paddle I purchased last year. It has lost all its grit, excessive usage. It's an edgeless 14mm carbon one. I used this lucid on it and it's better than when I first purchased the paddle. Now I don't have to buy another one.
Pyromed1
Comentado en los Estados Unidos el 2 de mayo de 2023
This product works perfectly. We used it over custom graphics. The Graphics are completely unobstructed by the grip. Awesome product.
ivwshane
Comentado en los Estados Unidos el 16 de marzo de 2021
I used this product on my snowboard after emailing lucid about what I wanted to do. They said I shouldn’t have any issues with it.In reality using this on my snowboard did give me a really good surface to use as a stomp pad without completely covering up my board graphics however it only lasted about half the day before it came off. To be fair, the top sheet of my board is very smooth and I think I would have had to lightly sand it to get it to adhere better however I did not want to damage my board.The biggest negative with this product was actually the spray bottle that housed the adhesive. No matter how I pumped it the stream was thin and forceful...uh...it would have been better if it came out in a mist instead and would have lead to a much better and more even application.When I initially emailed lucid their response was quick but when I emailed them again to give them an update I didn’t get a response. A little disappointing but who expected anything different.
Kristian Fernandez
Comentado en los Estados Unidos el 22 de octubre de 2020
Very good product. I built a longboard from a blank deck (no grip tape). My board had a really nice wood finish on top and I didn’t want to cover it up with black or white grip. Thats when I friend told me about this product. Followed all the instructions and it works really well and I can still see the wood finish up top which is the biggest upside. All in all the process of applying the tape took about 15 minutes and its been two months now and its still going strong. Highly recommend this product just got to apply it properly!
Productos recomendados
Mex $289.99
Mex $ 130 .00 Mex $130.00
Mex $517.83
Mex $ 238 .00 Mex $238.00
Mex $751.99
Mex $ 353 .00 Mex $353.00
Mex $690.57
Mex $ 317 .00 Mex $317.00
Mex $285.69
Mex $ 137 .00 Mex $137.00