No hay artículos en el carro
No hay artículos en el carro
Parts List:
1 x Sanding Pen 8 x Grinding Head 1 x Power Cord 1 x Storage Box 582 x Adhesive Backed Sandpaper for Flat Grinding Head (#180/280/400/600/800/1000, each grit x 97) 282 x Adhesive Backed Sandpaper for Curved Surface Grinding Head (#180/280/400/600/800/1000, each mesh x 47) 5 x Fingertip
Specification:
Product Name: Mini Reciprocating Sander
Material: Plastic + Metal
Size: 178x21x18mm
Reciprocating stroke: 2.5±0.1mm
Reciprocation level deviation value: ±0.1mm
Battery specification: 280 mAh
Left right swing deviation value: ±0.1 mm
Maximum load output current: 750 mA
Input voltage: 5 volts
Maximum no load output current: 250 mA
Output voltage: 3.7 volts
Power rating: 2.8 watts
Input Current: 1 amp
Charging time: 20± minutes
No load continuous use time: 100± minutes
Model: Nine batteries
Composition: lithium ternary
Notes:
1. Do not put the electric grinding pen in high temperature above 40 degrees Celsius.
2. Prohibit children under 14 years old to use this product.
3. Do not knock or drop the product to avoid damage and make it unusable.
4. Do not cover the operating electric grinding pen with any object to ensure good heat dissipation.
5. When not in use for a long time, it needs to be charged every six months to avoid over discharge of the lithium battery.
6. Please do not apply excessive force to the grinding head when grinding, so as not to cause excessive load on the motor.
7. Electric grinding pen power is relatively small, for small parts precision grinding and polishing, can not be used for large parts.
8. There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.
9.Please allow slight dimension difference due to manual measurement.