No hay artículos en el carro
No hay artículos en el carroDescripción del producto
DIY Diva
Comentado en los Estados Unidos el 14 de julio de 2024
I buy LED strip lighting all the time and in some instances I end up with a lot of left overs. I wondered if these would come in handy, so I bought them. This a.m. my under cabinet lighting quit working so I found a roll of left over LED strip, used this 2-pin quick splitter and to my great surprise, it worked. Would recommend.
Zach
Comentado en los Estados Unidos el 16 de junio de 2024
First, these work, and they work great. The only thing that I found was that they were consistently a little too small for my LED strips, so I had to put more effort into finding a way to jam them in. Besides that though, I currently haven't found a better solution on Amazon, so this works fine.
David
Comentado en los Estados Unidos el 12 de marzo de 2020
Had an issue pushing the led strip into the end of this L shape connecter. The brass pins are too tight against the body and causes the led strip to crumple and bend and not fully get inserted. Had to pry up on the 2 brass pieces to get the strip in. But that was the only issue. Beats having to solder wires to connect the strips together.
Evan
Comentado en los Estados Unidos el 18 de noviembre de 2020
I got these in order to connect several short LED strips to one power supply. I connected these to a "Litever Power Splitter", which then connected to the power supply. The advantage of using these instead of soldering everything together is that you can easily connect and disconnect the strips without soldering.I was pretty skeptical that these would make a good enough connection to be reliable. To my surprise they usually work pretty well. The only issue I had was trying to use one upside down (when gravity isn't adding force to help make the connection). To fix this, I simply soldered the connector to the LED strip.Using these definitely gives a more professional look than having 2 wires running out of the end of your LED strips.
Taylor Murdock
Comentado en los Estados Unidos el 5 de enero de 2020
These clips worked well for my shadow light box project. I used these and 12V 2A adaptors (https://www.amazon.com/gp/product/B01GD4ZQRS/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1) to make many functional light strips out of the 12 V water resistant LED 3528 light strip (https://www.amazon.com/gp/product/B01HRKVG7Q/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) I purchased.Note that you will need to peel back the silicone coating on your water resistant LED light strip and cut it off in order to insert the LED strip into the clip. You also need to ensure that the + and - sides of the LED strip line up with the corresponding + and - sides of the clip. I overlooked this at first and simply tried to insert the LED strip into the clip in the same orientation that a lot of online tutorials demonstrate. Make sure you look at the +/- symbols yourself and also make sure that the connection points on the LED strip to touch the metal prongs in the clip.
Productos recomendados
Mex $149.00
Mex $ 75 .00 Mex $75.00