No hay artículos en el carro
No hay artículos en el carroHoneywell TH6320ZW2003 T6 Pro Series Z-Wave Stat Termostato y hogar inteligente
J. Miller
Comentado en los Estados Unidos el 18 de marzo de 2025
I love this thermostat. It's not the fanciest.. it doesn't have some of the bells and whistles of the way more expensive smart thermostats, but it works and works reliably. I've had this thermostat setup with my HomeAssistant Zwave smart home network for a while now and it's been rock solid. There aren't a ton of choices when it comes to Thermostats that run natively on Zwave so I'm glad I found this one.It was a cinch to install and paired easily. It does require a dedicated power line from your heater unit but most modern setups will have this. I do NOT have a modern setup (old house with steam boiler and 2-wire thermostat) but was able to patch a hot wire from the boiler controller to the unit and it works great. You CAN power it by batteries alone if that's your only option but I spent a little time and research online to figure out how to hard wire the power - but you have options.It also looks sleek and unassuming on the wall. Some of these smart thermostats look like mini smartphones, all lit up and colorful but I don't want that in a thermostat - mine blends into the wall easy enough and stays dark (black LCD) until I touch it, which activates a pale blue backlight. The unit also comes with a nice frame plate of the same color plastic- supposedly to cover wire holes from an old thermostat, etc. but I found it looks nice without it and I didn't need to hide any wall damage.It's a great thermostat and I would definitely buy this again.
Jimw
Comentado en los Estados Unidos el 30 de noviembre de 2023
I just installed the new TH6320ZW2003 thermostat, and (so far, at least!) I'm delighted with it. It looks nice and does what it's supposed to do. Installation was straight forward.I did have to run a new 6 conductor cable and wire it both to the furnace and the thermostat, but that's not very complicated if you understand how it works. Wiring at the thermostat was made easy by the nice push-in, spring clamp termination block.I had no trouble connecting Z-Wave to my Hubitat C7 hub. After downloading a driver, it all worked as expected.As with many connected thermostats, the regular programming (5+2 days; wake, leave, return, sleep) is disabled when you enable Z-Wave. They seem to think you want your hub to become the temperature control system. If that's what you want - fine. But I just wanted a nice, programmable thermostat I could override via Z-Wave for instance when we are out of town. This one provides for that! While the main 5+2 x 4 schedule is disabled when Z-Wave is enabled, a simpler 5+2, wake + sleep schedule can be enabled if you dig thru the menus. That works fine for us. I had to read the manual before I purchased it to be convinced that was the case.Some commenters have complained they received a used device. While the box was slightly dinged, it was clearly still sealed, and the device was new. Others complained that there was another company's logo on the front. I handled it quite a bit during installation, and only noticed the other logo after it was installed and I was admiring it. The logo is quite understated, and unless I was looking for something to complain about, doesn't offend me at all.Another reported worry is that the heat relay sometimes fails closed ("on"), leaving the heat running continuously - a very bad thing. So far, it works fine. If it fails later, I'll update this review. Another is that warranty is only honored if it's installed by a professional (thus the 'Pro' designation). I'm not a contractor, so I'll be on my own if it fails. But at least thanks to the other commenters, I know that.While it may not be a good fit for everyone, overall, it does just what I wanted, and I'm very happy with it.
MichaelS
Comentado en Canadá el 30 de junio de 2022
This product works amazingly well with Home Assistant. One caveat, the zwave when on battery power (no C wire) goes to sleep. The fix was easy, send a command to the T6, wait 5 seconds and send again. the first command is ignored but does wake up the zwave. the second command is acted upon. At least through a lot of experimentation this is what I found. It only matters if there is a significant delay between sending commands that the zwave goes to sleep. This solution has worked 100% of the time!!!
RUBEN V.
Comentado en México el 1 de diciembre de 2022
No se pudo usar, se devolvio porque llegaron quebrados
matthew davies
Comentado en Alemania el 15 de marzo de 2021
It's a nice looking product and I think it has good functionality. However, it is not suitable for the Z-wave frequency band in Europe so I needed to return it. It is intended for use in US/Canada.
Sed
Comentado en Canadá el 30 de diciembre de 2019
This has all the features that you would need in a zwave thermostat. pairing is very easy and the connection is solid. It has auto mode as well but needs to be enabled but going to menu 300 in settings.
Productos recomendados
Mex $402.99
Mex $ 181 .00 Mex $181.00
Mex $3,130.19
Mex $ 1,408 .00 Mex $1,408.00
Mex $608.89
Mex $ 316 .00 Mex $316.00
Mex $2,320.00
Mex $ 1,044 .00 Mex $1,044.00
Mex $3,726.26
Mex $ 1,602 .00 Mex $1,602.00