No hay artículos en el carro
No hay artículos en el carroHHDZI Conector banana, conector de altavoz chapado en oro de 24K con conector de doble tornillo para cables de altavoz, cine en casa, receptores de audio/vídeo
E. Poppitz
Comentado en los Estados Unidos el 6 de diciembre de 2024
These are really nice speaker connectors. The threads to put them together operate smoothy and secure tightly.I prefer these over the ones you spread the wires out and fold over, those are fussy to put together and when they come loose can cause an open or bad connection. These are straight forward with the set screws. They even give you extra set screws in case you drop and loose one, that's a nice touch.If you strip the wire to a length where, the furthest in set screw clamps down on the bare wire to make the electrical connection, and the set screw closest to the opening clamps down on the insulation of the wire, it holds them together without the risk of having the wire break off from bending.Just a note, these plugs insert into the binding posts hole with quite a bit of force. This is only happens the first time you put them in, after that they go in normally. But they do hold very securely.I recommend these highly.
Kindle Customer
Comentado en los Estados Unidos el 3 de diciembre de 2024
The screw threads are fragile, where the outer casino screws on to the pin. If inserting into a tight post, it's certain that the casing threads get damaged, never to screw on again. Connectivity appears to be fine.
Dom G.
Comentado en los Estados Unidos el 29 de diciembre de 2024
I like these banana plugs. The dual screws really hold the wire in solidly and the plugs fit snuggly.
tim
Comentado en los Estados Unidos el 15 de diciembre de 2024
works good ,easy to use..
Nick in MN
Comentado en los Estados Unidos el 30 de octubre de 2024
These are nice typical banana plugs that are two set screw type. The dual set setscrews are big enough to not need a super specific screw driver, just a 'normal small' lol - some seem to need special tool. Like that the outer piece isn't super wide making it work well for tighter keystone wall plates or in back of stereo. Process isn't super fast to make cable end up, but it is typical of this style. Unscrew outer silver shell, then loosen two set screws, insert stripped wire (ensure stripped long enough to get to both screws) tighten set screws and then reinstall outer shell. No cons to speak of - seem nice!
Productos recomendados