Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

driver de temperatura para reptiles con temporizador, driver para terrario de agua de tanque de reptiles

Envío gratis en pedidos superiores a Mex $600.00

Mex $849.99

Mex $ 467 .00 Mex $467.00

En stock

Acerca de este artículo

  • Temporizador/termostato: termostato de reptil con 2 salidas de funcionamiento no empotrado. La toma S1 está diseñada para el control de temporización, mientras que la toma S2 se utiliza para el control de temperatura diurna y nocturna, cumpliendo con los requisitos de temperatura e iluminación de reptiles y anfibios.
  • Modo temporizador: el termostato para reptiles tiene tres programas de temporizador S1 personalizables. Al configurar S1, pulse "SET" para cambiar entre los tres grupos de programas. Para ajustar la hora de inicio a AM12:00 y la hora de finalización a PM11:59, el termostato estará en estado de encendido constante.
  • Modo de temperatura día/noche: el temporizador de luz de reptil ayuda a los reptiles a diferenciar entre día y noche en función de la temperatura. Puedes establecer el período de tiempo de día y noche, así como el rango de temperatura. (donde la hora de finalización del día es la hora de inicio de la noche). El rango de temperatura se puede ajustar de 32 a 140 °F.
  • Aplicaciones: los temporizadores de lámpara de reptil para lámparas UVB y de calor, almohadillas para orejas de calefacción y pantallas son solo para calentamiento a temperatura constante y temporizada, no para enfriar
  • Carga máxima: el temporizador de reptil tiene una carga máxima de 1250 vatios y una carga de cable de 10 A. El sensor de temperatura tiene un error de ±2°F, y la frecuencia de actualización es de 500 ms. Si el sensor está dañado, se puede reemplazar.
  • La característica de S2 es que puede ajustar la temperatura durante el día y la noche. Establecer diferentes temperaturas durante el día y la noche puede ayudar a las mascotas a distinguir entre día y noche, lo que es beneficioso para la salud y el crecimiento de las mascotas.
  • 【No es un atenuador】: el enchufe S1 está programado para encender y apagar, y el enchufe S2 se enciende y apaga según la temperatura establecida.



Descripción del producto

temporizador de reptil
temporizador de reptil
Termostato para reptiles
Potencia de entrada 100 ~ 240 V CA, 50 Hz/60 Hz
Potencia máxima 1250 W
Corriente máxima 10 A
Rango de control de temperatura -0 °F - 140 °F
Tipo de sensor Sensor NTC
Longitud del cable de alimentación de salida 46 cm
Longitud del cable de alimentación de entrada 140 cm

Ty
Comentado en los Estados Unidos el 17 de febrero de 2025
complicated to set up, but works good so far. seems well built, time will tell.
revusup
Comentado en los Estados Unidos el 7 de abril de 2025
Worked great.
splendiferous bastardous
Comentado en los Estados Unidos el 27 de abril de 2025
Garbage. It does not work
Joney
Comentado en los Estados Unidos el 4 de noviembre de 2024
Works amazing to keep my leopard gecko nice and warm and her lights regular. The thermostat is awesome for her backup heat source to make sure she stays in the parameters I set. We did lose power for a little over four hours and when it came back on the timer was only 10 minutes off, which I thought was pretty good. The first set up was frustrating, but now I can buzz right through it when I'm adjusting for the changing seasons. The thermostat seems to be pretty accurate as well.
Ryan
Comentado en los Estados Unidos el 27 de octubre de 2024
This was the perfect thing I needed. I needed a light timer and heating timer and this ticked all the boxes..This was priced well, seemed of very high quality and was very easy to set up once I read the directions a few times over.The functions are great and give you options for day and night temps, such as during the day my tank will stay between 83 to 87 degrees and then at night it drops to 72 to 76 degrees. That's what I set it to do and was very easy to make it happen. I like that it allows you to either keep one temp or have it swing temps, such as just keep it 80 degrees or let it fluctuate from let say 78 to 80. I feel that's more natural then just a constant setting, especially at night when you can have it drop even lower if needed to simulate night time temps.Also the light timer is great too, I just have it set for 9am to 8pm. But you can do more if you wanted too.Over all im very happy and glad I bought this, I would recommend to anyone who is looking for a simple heater and light combo timer.. my only issue is this company doeant seem to make a unit that has more outlets, so you could run 2 lights and 2 heaters for bigger tanks or other purposes. But I guess you could just buy two of these and call it a day..
Productos recomendados