No hay artículos en el carro
No hay artículos en el carroLa cubierta de polvo de la amoladora de corte cuenta con un zapato ajustable para proporcionar un fácil ajuste de profundidad de corte y múltiples ventanas para visibilidad de la hoja. El sistema de inmersión ayuda a mejorar la recolección de polvo al comenzar y terminar el corte.
Customer
Comentado en los Estados Unidos el 3 de mayo de 2025
Fantastic, contains my dust as expected.
Dissent
Comentado en los Estados Unidos el 27 de enero de 2025
Been using this tool to trim thin brick, mounted to mesh, to decorate my office. After about 1 solid hour of trying to adapt this contraption to my DeWalt 60v (Model DCG418B) grinder, I managed to get it working with a 4 1/2" diamond cutoff wheel. This is the most over-engineered, add on device I've ever seen DeWalt produce. Plunge cuts are VERY difficult as you can't see the blade at all, it's safely tucked under the cover about 3" from either end. Straight cuts were a pleasure. Now let's talk about DeWalt's vacuum attachments, I appreciate the DeWalt quick disconnect, that part was incredibly easy...however, good luck finding ANY adapter on the planet that will adapt a DeWalt 1-7/8 hose (dust collector) to their quick disconnect. I finally designed and 3D printed an adapter and then ran into another 1-7/8 hose anomaly...trying to adapt to the DeWalt 2-1/2 "shop vac" hose. I again, had to design another adapter to get them to connect. Absolutely ridiculous, step it up DeWalt. Try hosting a little R&D pizza party and get all the tool guys and all the vacuum guys in the same room and make everything connect to each other. If a guy at home can figure it out...there's hope for DeWalt.
Ken Fisher
Comentado en los Estados Unidos el 21 de julio de 2024
This shroud worked really well. I had to cut some stone back on a fireplace so I built a makeshift tent out of plastic and used this shroud while cutting and no dust at all got out into the room. Very happy with the performance.
Guadalupe S.
Comentado en México el 30 de julio de 2022
Buen producto
Mr. C. Dehaverland
Comentado en el Reino Unido el 16 de junio de 2022
DWE46125 Does not fit my dewalt grinder and have been told by dewalt th ants it’s not a Uk model that’s why having problems so a waste of money should not be selling in the Uk Amazon should refund me
nick
Comentado en los Estados Unidos el 7 de mayo de 2021
bought it, took about 2 hours to figure out how to hook it to my angle grinder. directions are not that great, and very little on youtube or elsewhere, for connection.OK, got it connected. it has adjustable depth, AND you set that depth, then open the cover latch, it lets the blade sit higher, to START the cut, then you gradually ease the blade downward, until you reac your desired set-depth, and then the cover locks. then you move forward. the dust collector port faces the FRONT of your grinder, as my picture shows. BUT, once set up, and connected to vacuum, it worked GREAT !. I was cutting tile, about 1/2 inch thick. I started to make cutting passes, because if i cut it at about 3 inches wide, i was able to break it loose from the subfloor, in one piece, without tons of fragments, so i can remove the floor. SO, i started to cut the floor, about every 3 inches, and i am going to do this to the WHOLE floor before removing more tile, so that way we can still use the bathroom. BUT, in doing it this way, the subfloor/masonry is preserved, not fragmented, the tile is lifting off of the mesh where the leveling compound was, and minimal shards of tile !. AND, the vacuum collection works great. very little escaped out hte front of the unit. the tile was BATTERY INTENSIVE, the cuts you see, combined, took 3 of 4ah batteries to do. BUT, as i said, well worth it; it collected 95% of dust; lightly vacuumed floor afterward, then wiped the surrounding areas, and very little red clay on the wet rag. SO, dewalt, put together a beter video of assembling this (it is NOT too difficult once you see how to do it), and you got a great tool AND directions !
EDGAR
Comentado en México el 26 de abril de 2021
Bueno para eliminas gran parte del polvo en ranuras de tabique y concreto. Lo que le falta es que embone mejor con el esmeril. Unir el esmeril con el extractor es complicado.
Productos recomendados
Mex $2,919.00
Mex $ 1,401 .00 Mex $1,401.00
Mex $2,606.00
Mex $ 1,120 .00 Mex $1,120.00
Mex $311.56
Mex $ 165 .00 Mex $165.00
Mex $1,881.40
Mex $ 865 .00 Mex $865.00
Mex $3,085.00
Mex $ 1,295 .00 Mex $1,295.00
Mex $721.40
Mex $ 331 .00 Mex $331.00
Mex $427.63
Mex $ 205 .00 Mex $205.00