No hay artículos en el carro
No hay artículos en el carroBox Contains the following: 1x Dust Shroud，8 PCS clamping washer thickness 3-9.5mm,1x clamping flange, 1x shroud wrench,1xUser’s guide,1x Grinding Diamond Cup Wheel.
Ken Watkins
Comentado en Canadá el 13 de junio de 2024
Fairly well built. Pretty tough.
Julie
Comentado en el Reino Unido el 17 de septiembre de 2024
Worked very well no sign of dust leaking out good price easy to set up
mr micheal gwillim
Comentado en el Reino Unido el 23 de febrero de 2023
Made of good quality plastic with some metal fittings and a brush around the base to facilitate better dust extraction. Comes with 2 tools to tighten its clamp and one for the angle grinders blade, several sizes of collar attachments aiming to make it a universal fit, and a dust extraction adapter.Fitting, easy enough although, specific adjustments maybe required for what ever machine you have, in my case I needed 2 M14 spacer to allow the blade to be correct height to reach the surface.Prepping hallway floor for tiles I find a high spot up to 4mm which I need to reduce, hence the purchase...Connected my old Bosch grinder to a vacuum via a cyclone, and so pleased I did as there was a lot of dust for a small area. The blade guard has a slide opening allowing close use to edges of floor, when using this function the dust extraction doesn't really work which is understandable...For the price of £25 I think this bit of kit is excellent, however, for a professional and constant user I'm not sure how long the kit would last?
Andy Partington
Comentado en el Reino Unido el 30 de marzo de 2022
I couldn't fault this product. I found it easy to fit and it took 3 -4 kilos of unwanted material into my dust extractor in a couple of hours allowing for breaks and emptying the extractor. I was working indoors and attached to an extractor had no clouds of dust and very little mess. Great product.
Craig
Comentado en el Reino Unido el 19 de octubre de 2021
It was a bit fiddly at first but when I found the right washer and tightened the bolt up a bit it did fit quite snug but also allowed me to rotate the cover around the grinder when I let the quick release go. I’m planning to use it with the rubber disc with fibre sanding pads as seen In the photo, it also comes with washer to hold the disc flush with the shroud. I haven’t tested it yet too see how well it collects the dust but so far I’m happy with the purchase, this is the second Aidlife attachment I’ve purchased and they seem well made at a good price too.
Productos recomendados
Mex $2,178.07
Mex $ 1,001 .00 Mex $1,001.00
Mex $3,701.06
Mex $ 1,554 .00 Mex $1,554.00