No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Michael & Nicole Welanc
Comentado en Canadá el 5 de marzo de 2025
Does it's job well, and easy to use. Seller is great with communication and helped with a replacement part for the machine very quickly. Highly recommend
Isaac Rinke
Comentado en los Estados Unidos el 17 de febrero de 2025
Well built. Saved DAYS of stripping in like an hour just cranking by hand. This is well worth the cost. It's not hard to crank, even on 300kcmil, and the drill function would be even easier.
Josh
Comentado en Canadá el 28 de julio de 2024
A great tool, and a worthwhile investment!Right from opening the box this wire stripper felt sturdy, high quality, and like it was well built and assembled. Extra knobs, plates, and bolts for fastening to a table setup were also provided which was nice.I ran kilometres worth of wire of all varying types and diameters on the first day and it performed without a hiccup. Saved me many many hours of manual labour!I definitely recommend fastening the machine to a table setup and using a power drill for the most efficient stripping. You will need your own 10mm driver bit for a drill if you don’t want to hand crank.My only small annoyance was that setting the blade depth can be finicky, and needs to be set very precisely if you don’t want the rollers to skid, the wire to jam, or the wire to slip off the side of the rollers. Also, this machine WILL remove the initial casing of multiple - braided together - wires, but not nearly as effectively as once you have the wires down to individual strands. But these small annoyances are nothing compared to the time saving this tool provides. Just spend a few extra moments and trial runs to make sure your blade depth is set well, and that the face feed plate is set low enough to feed the wire into the rollers, and then up and into the blade. A few extra minutes in setup and you will have no problems!Overall, a very good buy. Knowing what I do now, I would not hesitate to buy it.
Roberto Guerrero Ramos
Comentado en México el 11 de agosto de 2022
Esta maquina es bastante útilCumplió para lo que la necesitabaGracias
Roberto Miguel Valenzuela Cantú
Comentado en México el 6 de marzo de 2022
Aún que nos tardamos una semana con dos personas trabajando en pelar el cable, fue mucho más rápido que hacerlo solo con navaja, muy buen producto
Alejandrina Pérez De León
Comentado en México el 25 de diciembre de 2022
Perfecto producto muy padre excelente abre el cable sin batallar para pelear
Electro power
Comentado en India el 6 de febrero de 2021
Machine is good the only problem is this machine is not working properly when you connect drill machine to this machine ,it's working fine manually
Nagaraj
Comentado en India el 13 de enero de 2021
Rust form
Enrique M.
Comentado en México el 23 de abril de 2021
Definitivamente hizo mi trabajo suuuper facil, MUY recomendada..!!
IVAN HERNANDEZ
Comentado en México el 21 de abril de 2021
Muy bien, excelente producto cumplió las expectativas
FPADILLA103
Comentado en México el 28 de septiembre de 2020
PRODUCTO DE MUY BUENA CALIDAD
Javier Canto Gudiño
Comentado en México el 12 de diciembre de 2019
Es un buen producto, aunque requiere de una estructura para sujetarlo firmemente.
Productos recomendados
Mex $4,584.35
Mex $ 1,881 .00 Mex $1,881.00
Mex $86.13
Mex $ 44 .00 Mex $44.00
Mex $1,451.40
Mex $ 595 .00 Mex $595.00
Mex $129.00
Mex $ 74 .00 Mex $74.00
Mex $373.45
Mex $ 186 .00 Mex $186.00