No hay artículos en el carro
No hay artículos en el carroEnfoque movimiento de la mano puede causar la imagen a un telescopio o incluso mover completamente fuera del campo de visión, especialmente en alta ampliaciones. Pero con la accufocus focuser electrónica, quienes annoyances son una cosa del pasado. Utilizando el driver de mano con pulsador usted obtenga suave, un enfoque preciso, sin vibración. Elegir cualquier velocidad de grueso a muy fino. El motor de corriente continua se instala fácilmente y funciona con muchos Celestron, Skywatcher, Meade y telescopios Orion. Es alimentado por una batería de 9 V (incluido) driver de en la mano. Soporte bobina de cable, hardware, y también están incluidos.
Ray M.
Comentado en los Estados Unidos el 6 de junio de 2023
I have issues with this product. One, it eats 9volt batteries! I have yet to try rechargeable ones.Though I do plan to do so.Two, the hand controller is cheap plastic.But it does have variable speed controller, which I like, slow and fast. Not too fast.The motor is metal casing, be careful installing this item. Make sure the motor shaft and telescope shaft align straight, otherwise it will bind the focusing shaft and cause damage!Three, I don’t like that it’s made cheap and feel like a toy. However it does focus well.I have only three stars because the hand controller is plastic.Overall, I do like the unit. However I would recommend purchasing more of an upgrade unit that is made of steel aluminum, hand controller that is.
I.G.S
Comentado en el Reino Unido el 26 de enero de 2020
Perfect item, really easy to fit to my scope, Celestron 130 slt. Works well. Low speed is perfect for accurate focussing with no difficulty. and all the way from Fresno USA in a couple of days, earlier delivery than estimate
JerryB_FLA
Comentado en los Estados Unidos el 19 de marzo de 2019
No se pudo cargar el contenido.
Levon Z.
Comentado en los Estados Unidos el 25 de agosto de 2018
I bought this for my Orion Starblast 6 which is a newtonian scope for which it is not designed for. However it literally took me 10 minuets to slightly modify the mount that was included with the devicewith some plies to make it fit on my focuser. Now it works wonderfully, I can fine focus on high magnifications without frustration of wobbling the image. Whoever tried to do it knows what exactly I’m talking about. Speed control works great but ot is marked wrong way, not sure why. Not a big deal though.
JC
Comentado en los Estados Unidos el 24 de octubre de 2017
It works and is easy to install. It's not a sophisticated piece of machinery, but does its job well. The fast/slow directions are mislabeled, but this is not a problem at all as I just turn the knob to the speed I need. It worked well on my Orion ST80's stock rack & pinion focuser. I replaced the ST80's stock 1.25" focuser with a 2" dual-speed Crayford and will be putting the AccuFocus on a single speed 2" Crayford focuser which will be on a 203mm reflector OTA. I do recommend it for the R&P focuser on a refractor. It did not, however, fit the 1.25" R&P focuser on my 114mm Newtonian reflector. Just follow the instructions, put in a 9V battery, and watch it focus without the vibrations from manual focusing. I use velcro (soft side on the AccuFocus and rough side on my tripod legs) to keep it on the tripod. Again, very 1970s technology, but it works.
Productos recomendados
Mex $569.00
Mex $ 273 .00 Mex $273.00
Mex $390.00
Mex $ 198 .00 Mex $198.00
Mex $360.00
Mex $ 198 .00 Mex $198.00