Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

APEC Water Systems ICEMAKER-KIT-1-4-RO APEC Water Icemaker Kit for Reverse Osmosis Systems and Water Filters

Envío gratis en pedidos superiores a Mex $600.00

Mex $537.00

Mex $ 241 .00 Mex $241.00

En stock

1.Nombredelpatrón:Para Sistemas Estándar Ro De Salida De Tubos Od De 1/4 Pulgadas


Acerca de este artículo

  • Conecta los sistemas APEC RO a las máquinas de hielo para refrigeradores para obtener agua ultrapura superior a los filtros de refrigeradores
  • Disfruta claro, brillante.
  • Incluye 20 'de 1/4 pulg. 1 conexión T de conexión rápida
  • Funciona con la mayoría de los sistemas de ósmosis inversa y de filtro de agua usando tubos estándar de 1/4 "
  • Accesorios John Guest (JG)



Más información del producto

1
encabezado 2

icono 1

Protección de accesorios sin fugas

El kit de fabricación de hielo APEC de alta calidad te proporciona cubitos de hielo transparentes y brillantes y agua potable en tu refrigerador mediante el enrutamiento de agua purificada de tu sistema de ósmosis inversa existente. Nuestros accesorios JG de clase mundial vienen con dientes de acero inoxidable para un agarre máximo, y la junta tórica especial proporciona un sello a prueba de fugas.

icono 2

Di adiós a los filtros de refrigerador

Nunca más tendrás que comprar filtros de nevera pequeños, ineficaces y caros Ahorra dinero y tiempo con este kit de enganche sin mantenimiento.

icono 3

Excelente sabor y pureza de hielo

Con este kit de máquina de hielo -RO-1-4, disfrutarás de cubitos de hielo purificados de cristal dispensando en tu nevera No más hielo nublado, ahora será Clean 'n Clear.


amber k.
Comentado en los Estados Unidos el 23 de agosto de 2024
This tubing was very easy to install and worked perfectly for what I needed
John L. In TX
Comentado en los Estados Unidos el 10 de diciembre de 2024
We love our ROPH75 APEC water system and when a new refrigerator was purchased I wanted to extend the better water to the fridge too. This kit came with everything needed and following the instructions was super easy. I placed the cut-off valve close to the fridge and drilled a hole close to the floor of our counter cabinets. The line was more than long enough to reach our sink. The supplied T connection made connecting this to the filtered water faucet very easy. No drips and only a couple of line cuts were needed. After a quick line flush via the fridge I turned on the ice maker and that was that. The water filter in the fridge is now redundant as it won't have anything to filter. The ice is much clearer over others and it tastes great. I am very happy with the results and instructions and look forward to summer time when we can use more ice.
Alfonso Marin
Comentado en México el 22 de abril de 2022
Llegó rápido, en buen estado y cumple con lo anunciado.Muchas Gracias.
florentino
Comentado en México el 15 de agosto de 2020
Excelente producto funciona muy bien entrega en tiempo y forma Llego antes de lo estimado
Poc Network // Tech
Comentado en los Estados Unidos el 31 de marzo de 2020
This is an absolute must-have if you plan on installing an RO setup and have a fridge that has an ice maker and/or water dispenser. Not only does it make better financial sense to go this route (the proprietary filters in fridges are badly over-priced), but the filters in these fridges usually don't do squat when it comes to "filtering" compared to an RO system.We installed an RO system at the office here (break area) and brought it to the fridge with this. The fridge is a Whirlpool Gold series with ice/water and it's special filters that cost $30-$40+ each and they try to get you to replace them every 3 months (per the built-in timer/reminder). The filter never brought the PPM of the water down much (took it from close to 500 to around 460-470 on average. We removed the filter in the fridge to bypass it and allowed the "now" clean water from the RO to replace the normal water line, and PPM is now around 9-12.So ditch the fridge filters and drink water that truly is clean. Use this adapter to split from the RO system feeding your sink (or wherever it is initially feeding) to include the fridge as well. You won't regret it.Installation is also quick and easy, especially once you are always used to the setup of the RO system itself. The only hard part ("hard" can be debatable depending on your situation) is decided how you want to run it to the fridge. We just drilled holes in the top/back portion of the cabinets and run the line behind all of the sliding drawers. Out of sight, out of touch. Installed in about 10-15 minutes tops (not including the setup time of the RO system of course).This is a perfect kit of utensils for those who like to travel around and camp via vehicle. You get everything one person would ever need, regardless of the meal their hearts are set on, which is the biggest selling point. The carrying case also helps to keep everything together within a small space with protect them from being scratched by other things in the area.As for camping, I did make sure to word it carefully for those traveling by vehicle to camp. These are steel, which means they have weight. Nothing abnormal, but heavier than what you would bring with you if you were to backpack to your destination (in those situations, you want to stick to aluminum or carbon fiber to reduce your pack weight). So if you are traveling in ways where you aren't counting every pound of your weight, these are perfect! This also means they are more affordable, hence the price (vs the inflated price of aluminum or carbon fiber utensils).With the choice between black or silver, black is clearly the obvious choice since it sets them apart from every other pair of utensils you run into (given, that's just one person's personal opinion).We'd post some pictures but Amazon has turned off the ability to include images for the time being. Hopefully, we can come back and add them later when all of this lockdown business is over.**If you have found our review helpful, please vote it as helpful below so I know. This helps me provide quality feedback in the future.
Rodrigo
Comentado en México el 25 de marzo de 2018
Verifiquen los precios de los diferentes proveedores porque hay mucha diferencia entre unos y otros. Más de mil pesos de diferencia.
AmyL2005
Comentado en Canadá el 4 de octubre de 2018
It took me half hour to set everything done. Most time consuming is we have to drill a hole under the sink cabinet to pass the tube from basement roof to connect icemaker water tube. (Our original icemaker get water from basement water supply pipe)
Ross
Comentado en Canadá el 15 de septiembre de 2018
Good product.
Productos recomendados

Mex $856.76

Mex $ 471 .00 Mex $471.00

4.6
Elegir

Mex $3,600.72

Mex $ 1,440 .00 Mex $1,440.00

4.4
Elegir