Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

ZJIA Termopar tipo K de 100 mm, acero inoxidable, pala, -100 °C a 1250 °C

Envío gratis en pedidos superiores a Mex $600.00

Mex $266.59

Mex $ 143 .00 Mex $143.00

En stock

Acerca de este artículo

  • Temperatura de funcionamiento: -100-1250 °C
  • Material de la sonda: acero inoxidable
  • Diámetro de la sonda: 5 mm
  • Tamaño de las roscas: 8 mm
  • Longitud de la sonda: 100 mm


Características:
Se adapta a todos nuestros controladores de temperatura
Este artículo ha sido probado en buenas condiciones de funcionamiento
Permite formar y doblar el termopar sin riesgo de agrietarse.
Temperatura de funcionamiento: -100-1250 °C.
Material de la sonda: acero inoxidable.
Diámetro de la sonda: 5 mm.
Tamaño de las roscas: 8 mm.
Longitud de la sonda: 100 mm.
Longitud del cable: 3 m.
Cable blindaje externo: trenzado de acero inoxidable.
Aislamiento interno del cable: fibra de vidrio.
Conector: Tipo de pala
El paquete incluye:
1 termopar tipo K


Santosh
Comentado en Arabia Saudita el 20 de marzo de 2025
Poor quality.only 1 day worked.
Gary Cooper
Comentado en los Estados Unidos el 11 de febrero de 2025
Good value works great
Garrett J Roach
Comentado en los Estados Unidos el 22 de mayo de 2024
Very accurate, but don't get it wet. I submerged it many times using it to measure the temp of my mash for beer Brewing. Eventually the probe started to read inaccurately. I purchased a new one and all is well again. Lessen learned.
Jorge A.
Comentado en México el 14 de noviembre de 2024
La seriedad
Art
Comentado en los Estados Unidos el 6 de septiembre de 2024
I use this thermocouple with a Flute multimeter to confirm that the hot air from SMD Hot Air Rework station has the correct air temperature. Compared the measurement results with the results from another known (and expensive) instrument. The test results are consistent.
Roark
Comentado en los Estados Unidos el 19 de abril de 2022
This is a decent quality type K thermocouple, but please be warned: the ad says “1250 C”. NOT A CHANCE. Make that “C” an “F” and you’re good. I used this as an EGT probe in a mini turbine. At 1600F it melted the probes metal casing which promptly disintegrated and blew itself apart. If you are using it under about 1400F, you should be good, and it will work fine. Just dont believe that 1250C rating. Totally bogus.
Productos recomendados

Mex $4,890.60

Mex $ 1,881 .00 Mex $1,881.00

4.4
Elegir

Mex $199.00

Mex $ 99 .00 Mex $99.00

4.4
Elegir

Mex $2,035.39

Mex $ 956 .00 Mex $956.00

4.7
Elegir

Mex $2,903.91

Mex $ 1,393 .00 Mex $1,393.00

5.0
Elegir

Mex $749.99

Mex $ 382 .00 Mex $382.00

4.7
Elegir