No hay artículos en el carro
No hay artículos en el carro
El youyeetoo X1 es un computadora de placa única con un Intel Celeron N5105 de 11ª generación de 4 núcleos. El N5105 es un SoC de cuatro núcleos y cuatro roscas de la familia Jaser Lake. cuatro núcleos de CPU Tremont están sincronizados entre 2 y 2,9 GHz (ráfaga de un solo núcleo). Utiliza cachés L2 de 1,5 MB y L3 de 4 MB.
Varios tamaños de memoria RAM y almacenamiento están disponibles, con soporte para wifi extendido M.2, 4G LTE y SSD. La configuración correcta se puede adaptar a las necesidades de tu proyecto. Ya sea que sea un fabricante de bricolaje, desarrollador de IoT, integrador de sistemas o proveedor de soluciones, siempre puede encontrar lo que desea.
Principalmente para industrias industriales, IoT, automatización, robótica y otras industrias.
Tutoriales
El equipo de youyeetoo ha proporcionado un tutorial completo [wiki.youyeetoo.com] y ha creado una comunidad [forum.youyeetoo.com] para el X1.
Puedes aprender fácilmente a usar UART, SPI, MIC, GPIO en Windows a través de los tutoriales e intercambiar ideas con la comunidad.
Especificaciones clave
CPU: 11ª generación de 4 núcleos Intel Celeron N5105 (hasta 2,9 GHz), 10 nm, 10 TDP
Gráficos: gráficos Intel UHD.
RAM: 4 GB, 8 GB, 16 GB LPDDR4.
Almacenamiento: 0, 64 GB, 128 GB, 256 GB.
Compatible con tarjeta TF, llave M.2 M 2280 NVMe/mSATA SSD, SATA 3.0 a través de FPC.
Vídeo: 4K@30fps (HDMI, mirco HDMI), 1080P (MIPI-DSI)
Audio: conector de 3,5 mm, 8Ω SPK 2PIN (3W) , micrófono
Redes: WIFI 5 + BT 5.0 / WIFI 6 + BT 5.2 / 4G LTE a través de M.2 2230 E llave, 1 GbE LAN.
Otros: USB3.0, USB2.0, UART, GPIO, IIC, SPI, RTC, NFC.
Sistema operativo: Windows 10 / 11, Linux.
Tamaño: 115 mm x 75 mm x 20 mm.
Potencia: 12 V 3 A a través de alimentación CC (5525)/ PH-2A 2,54 mm, 24 W PoE
Soporta Wake on Network, Wake on Call.
Listado de envío
1x youyeetoo X1
Fuente de alimentación de 1 x 12 V 3 A.
1 ventilador de refrigeración activo (montado)
ROBERT F GORMAN
Comentado en los Estados Unidos el 27 de junio de 2024
I bought the board to play around with Linux from Scratch, and try making my own Linux Distro. It's very great so far. I think it has the same CPU as the PandaLatte Delta, but it's $100 less. It has a ton of ports and IOs, and 2 m.2 (one for Hard drive, one for expansion chips.). So you can put in an AI accelerator chip to have a nice little LLM. It can run Blender with decent frame rates.Overall a great board with a nice kick in strength. It's a little bit bigger than the RPI5, but can host a ton of hardware to test and build with. I can see myself eventually using this to run manufacturing hardware when I'm done with my Linux from Scratch experiments. I plan to play around with it quite a lot and see what else it can do.Currently using Alpine Linux on it. Running smoothly.
Jacek Gasior
Comentado en los Estados Unidos el 31 de mayo de 2024
nice not expensive sbc x86.I bought 8 gb ram 128 giga emmc. thats enough for windowsinstalled 80 mm fan to keep it cool. attached it to 10 inch touch screen. there is additional hdmi out which i have connected to 24 inch monitor to set up new windows install. now is disconnected.I reinstalled all drivers from wiki product website.and here you go.....very nice 3d printer cad station.... not to keep busy my main computers.working perfectly. windows is very responsive. using design spark mechanical cad - also working with no issues. of course first 3d project was attachments to screen, fan holder, legs. so far 5 stars for youyeetoo X1
Damien
Comentado en los Estados Unidos el 6 de marzo de 2024
It's nice to have an X86 mini PC with this much IO. Particularly if you like to tinker like I do. I bought this primarily to emulate N64 and PS2. I can confirm that it will play Ocarina of Time and Metal Gear Solid 2 at native resolution. I have tried to upscale OoT within retroarch settings for more time than I have actually played the game (no success....yet) and my experience with getting it to run smoothly in the first place wasn't exactly "plug and play". With that said, I've only been using retroarch for a month and I have zero experience with emulation prior to this. As a normal PC, it works straight out of the box as Windows is already loaded. My only complaint is that I wish it had a USB-C port to power my portable monitor. It's also worth mentioning that you will have to purchase a WiFi/BT module separately. I bought the M.2 2230, AX200 kit from Intel for $20. It worked straight out of the box.
mlp40ej
Comentado en los Estados Unidos el 13 de enero de 2024
I ordered the 8GB RAM w/256 GB eMMC version. It arrived and I installed linux on it. Although the linux installer can find the eMMC, the BIOS on the board cannot so the installed OS will not boot.youyeetoo worked with me & determined there was an issue with the board. I sent it back for replacement with an 8GB/128GB board & a slight refund. The new board is working great so far. It was easy to install linux, and the system is very fast. Looking forward to trying out some of the features of the board. I would consider buying the 8/128 board again if I need another SBC.
TJ
Comentado en los Estados Unidos el 9 de abril de 2024
The youyeetoo X1, powered by Intel Celeron N5105, has a small form factor but is quite powerful. Good enough that it's actually replacing my laptop during travel. I installed Manjaro in the eMMC and everything works exceptionally well. It's more expensive than your traditional SBC but I guess that's because it runs x86 instead of ARM. The onboard fan is audible at temps greater than 58C but not terrible. Overall a great SBC!
Productos recomendados
Mex $537.70
Mex $ 258 .00 Mex $258.00
Mex $600.77
Mex $ 306 .00 Mex $306.00
Mex $1,423.13
Mex $ 626 .00 Mex $626.00