No hay artículos en el carro
No hay artículos en el carroYOOPAI Kit de limpieza de boquillas de impresora 3D, kit de limpieza de impresoras 3D con mango de goma suave, agujas de limpieza de boquillas de 0,4 mm y cepillo para polvo de alambre de cobre, kit de herramientas de impresora 3D para boquillas de 1,75 mm
green lizard
Comentado en los Estados Unidos el 30 de marzo de 2025
YOOPAI 3D Printer Nozzle Cleaning Kit, 0.4mm Nozzle Cleaning Needles and Copper Wire BrushThis is an ok kit. I wish it had sizes needles for different sized nozzles(like .6 and .8). However, I was able to use it to fix a clog in my .6mm nozzle recently.
User26
Comentado en los Estados Unidos el 24 de marzo de 2025
So far I have used this kit twice to perform cleaning maintenance on my Qidi Q1 Pro. Both times the kit proved its worth. I had a piece of TPU stuck in the extruder and without the long cleaning needle being strong and flexible I would have had a very hard time maneuvering the piece of TPU. The build quality of the cleaning needle, brush, and steel cleaning needles appears to be high. Further testing will be required to test the durability, but in my two maintenance sessions all the tools functioned properly. For the price, it would be hard to find a better nozzle maintenance kit.
isosaf
Comentado en los Estados Unidos el 15 de marzo de 2025
This is a nice set of nozzle cleaning tools. I actually want to give it 5 stars, but I cannot for one reason. I don't even think its important, but the large 1.5 mm needle (the one with the rubber handle) is not the same as per the description and photos. The 1.5 mm "needle" that I received has a blunt tip (see photo), whereas the description text and photos indicate it should be a pointed needle. In this case I really think the blunt edge is better, but it would not be right to give 5 stars for such an obvious discrepancy. If no other reviews call this out then my guess is I received the bad one that got past the QA inspector.That said, the rest of the kit is great:2x needles .5 mm*3x needles .4 mm*3x needles .3 mm*2x needles .2 mm*1x "needle" 1.5 mm with handle1x brass bristled brush1x storage tube*By my measurement, all of the needles measured .01 mm smaller than described, which could be caliper error or by design. Nonetheless, the .4 mm needle slipped nicely through a new .4 nozzle.Overall I'm glad to have this set in my workshop. I dread the day I have to use them, but I will be glad to have the tools at hand.
SD
Comentado en los Estados Unidos el 15 de marzo de 2025
I have a hotend that likes to clog and this fixes it every time. For the absolute worst clogs I will not only heat the hotend up, but heatup the tip of the rod on the clog clearer with a butane torch, if I do that it will push/melt through any clog no matter what part of the filament path it is in. You do have to be aware that if you have to resort to this you could melt the ptfe tube insert in your hotend if you have one, then if you damage it you will need to disassemble the hotend to replace that section of tube but I haven't had this happen yet after having to resort to heating the tip a handful of times, and even if I did, it beats throwing the hotend away due to a clog that can't be cleared. If you need this often look into increasing the cooling on your hotend or lowering your printing temps, but sometimes with heated chambers and high temp materials you may not be able to do that, and if that leaves you with a clogged hotend, this will fix it.
Jon Allen
Comentado en los Estados Unidos el 11 de abril de 2025
The main perk of this kit is the larger needle with the handle that you can use to clear clogs from the top end of the nozzle. Too many printers don't come with this or a metal brush that can clean plastic off of a hot nozzle.Little needles that go in the bottom of the nozzle are good to have, but 9/10 times the big top loading needle works way better for clearing clogs because it actually pushes the blockage out, instead of back up in the nozzle where it will just come back down and clog it again
Productos recomendados
Mex $291.00
Mex $ 133 .00 Mex $133.00
Mex $380.67
Mex $ 186 .00 Mex $186.00
Mex $243.71
Mex $ 121 .00 Mex $121.00
Mex $333.99
Mex $ 170 .00 Mex $170.00