No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Dimensiones:
TorontoConsumer
Comentado en Canadá el 24 de enero de 2025
I have been using this product for about 8 months now. It came recommended to me and it was a great recommendation. I now have the vibration sensor as well as the yolink water sensors. These products really help with the safety of your house especially while on vacations. Alerts come thru seamlessly. Wish they had cameras that linked to the sensors that would take it up a step further but for now these work tremendously
SemoTech
Comentado en los Estados Unidos el 12 de agosto de 2024
I have experience with multiple IOT platforms, including YoLink, Aqara, Lutron, VOCOLink, etc… and countless sensors for each, but until now I never had or tested a vibration sensor.My use case is around the need to monitor a pool pump and ensure it comes on-line each day. As the pump is variable speed and internally computer controlled it has to be connected to power all the time so a high-power contactor is not going to work. I thought about installing a CT probe in the power panel to monitor power usage and while that would have worked there are issues with WiFi reaching inside the metal box as well as the lack of software logic to alert proactively when there is no power usage.Anyway, I tried to simplify solving the problem by just installing a vibration sensor on the pool pump, to be able to tell and be notified when the pump comes and goes off. To hedge my bets I ordered both a YoLInk and Aqara Vibration Sensors and attached both to the pump in the same location for testing.The YoLink sensor is about 3 times larger than the Aqara one but has the advantage of using 2 x AAA batteries that are easily replaceable and since they provide more power the YoLink sensor will last longer. The YoLink sensor also has a much more customized device configuration in the YoLink app with great options that allow me to setup an alert if the pump (vibration) does not occur in the AM when the pump starts! Lastly, the YoLink sensor proved to provide 10 levels of vibration sensitivity straight in their App, whereas the Aqara sensor only provides 3 levels and for changing each one you have to also press the button on the sensor. Not very practical on Aqara! Lastly, the YoLink sensor uses LoRa long range technology and has a much better connection all the way to my pool pump.I must say I am thrilled with the performance and features of the YoLink Vibration Sensor and it has solved a very frustrating problem for me which is why I wanted to recommend it.
Vegetarian Aardvark
Comentado en Canadá el 13 de junio de 2024
I am using this as a vibration sensor on my sump pump discharge pipe, to monitor that the sump pump is working. This integrates very well with Home Assistant. I have built automation that tells me how many times my sump pump has cycled, the time between cycles and a battery percentage indicator. My built automation will alarm me after a set period if the sump pump does not run. I determined statistically how often the sump pump should run based on history and set the alarm to slightly more. I also purchased the YoLink water sensor to act as a complete solution to ensure that I can take action should the sump pump not be running or water is detected to prevent water damage in my basement. Since my sump pump is within a walled off section in my basement these YoLink long range sensors work very well in comparison to other standard vibrations sensor where the signal gets very weak and may not work.
Tom
Comentado en Canadá el 14 de diciembre de 2024
I can't say enough good things about Yolink. Long distance coverage, very very reliable and if there ever is an issue they respond fast and stand behind their products.
Rob
Comentado en los Estados Unidos el 17 de febrero de 2022
I was struggling to come up with a way to automatically turn on/off a sanitizing UVC light I installed on my HVAC ducting. I had installed the "REKO Lighting R2000 Air Purifier Whole House Uv uvc Light" (purchased on Amazon) but the unit itself has no switch. The way the unit comes, once it's plugged in, it's always on, which shortens the life of the bulbs and wastes electricity. The light itself isn't serving any purpose if it's on while the furnace/AC is not running (since no air circulation means no air is being sanitized). I had looked high and low for a smart vibration sensor that works with Alexa but didn't find much. I finally came across this YoLink unit and purchased it right away. I've been super impressed with Yolink's products, and this vibration sensor certainly didn't disappoint. If you already have a YoLink hub, adding this unit takes about a minute, and can then run off the YoLink App or Alexa (including routine trigger). If you don't have their hub, you'll need another 5 minutes or so to set one up. Once I added the unite to the App, I simply set it on top of my furnace, and now when the furnace turns on, an Alexa routine triggers a smart outlet to turn the UVC light on. When the furnace is not running, the routine triggers the outlet/light to turn off. It could hardly work more perfectly. I'm now dreaming up what else I could with these units.I have since bought several other YoLink products and they all work wonderfully, and they have some of the easiest setup I've experienced from any smart products. I called their tech support a few times to run a few different scenarios by them, and I always reached a person within 5 minutes. I hope they keep it up.Yolink products have excellent range and low power consumption due to the type of wireless tech they use (LoRa). Read up on it. YoLink, if you read this, please give your tech support person a raise. I spoke to the same person each time (which is amazing) and he really knew his stuff. Message me if you want to know who it was.
Productos recomendados
Mex $143.99
Mex $ 80 .00 Mex $80.00
Mex $527.79
Mex $ 248 .00 Mex $248.00
Mex $384.00
Mex $ 192 .00 Mex $192.00