No hay artículos en el carro
No hay artículos en el carro Este driver tiene un sistema de carga eficiente y puede manejar el alcance de entrada de alta potencia a 1920W, este driver está equipado con un microprocesador STM 8 de grado industrial para controlar el proceso de carga y descarga. Tiene una gestión perfecta y responsable del período de carga y descarga de la batería. El circuito de carga se caracteriza por una alta eficiencia y bajo consumo controlando el MOSFET de la resistencia interna ultra baja con PWM. Este driver tiene múltiples modos de control de carga y adaptable a diferentes industrias. La carcasa de este driver está hecha de material ABS de calidad superior que es extra duradero. Puerto de salida USB también equipado con este driver para carga de dispositivos eléctricos.
El manual de usuario está disponible para descargar
Especificaciones del producto:
Modo de control de carga: PWM.
Corriente nominal: 80 A.
Voltaje nominal: 12 V/24 V Identificación automática
Potencia máx. de entrada: 960 W (12 V), 1920 W (24 V).
Área del cable de instalación: 3 # AWG (25 mm2)
Voltaje máximo del panel solar: 48 V.
Voltaje de flotación: 13,8 V/27,6 V.
Desconexión de bajo voltaje: 10,7 V/21,4 V.
Reconexión de bajo voltaje: 12.5V/25V
Sin pérdida de carga: Caída de voltaje de bucle: Compensación de temperatura: -4mV/Cell/°C
Temperatura de funcionamiento: -10℃~60℃.
Temperatura de almacenamiento: -30 ℃ ~ 70 ℃
Requisito de humedad: ≤90%
Dimensiones: 128 x 188 x 61 mm.
Distancia entre agujeros de montaje: 98 mm x 178 mm --Φ5.
Peso neto: 720 g.
Contenido del paquete:
1 driver de carga solar de 80 A.
1 sensor de temperatura.
1 manual de usuario (idioma español no garantizado)
roustabout bill
Comentado en los Estados Unidos el 13 de enero de 2025
This Solar Charge Controller 80A- PWM 12V/ 24V -1920W -Solar Panel Charger- is an overall excellent choice for multiple solar/ battery bank systems. Some I have charging 24-volt battery banks, and some are on 12-volt systems, and these are the best for the amount of charging and battery info -on one screen. I never go over 80 amps total panel input, and they just keep working and charging day after day. I needed one more for a 24-volt - four solar panel system- with a 4- 6v - 430 AH each- battery bank that powers a 24 volt- 220-volt output- inverter that is running a deep well pump easily with no overheating, etc. Excellent charge controller! Great find!
edward
Comentado en los Estados Unidos el 4 de junio de 2024
These PWM controllers work well for lead acid batteries. Over the last year mine has been running 24/7 to power an off grid cabin in the desert. It charges (8) 29dc lead acid batteries a 10kwh bank using (6) 260w solar panels. At 24v 2000w of solar capability cannot be found in this price range anywhere. I would not use for lifepo4 batteries as the pulse width mod is designed for lead acid and may damage lifepo4 over time. Some of the negative reviews could be caused by too much solar watts at 12v. Loose wire connections (always check a week or so after install) can cause burnt connectors. I’ve seen that in victron controllers as well. It has worked in freezing temps as well as 115 degree heat and my fridge has never stopped running, my water pump and lighting have always worked as this provided enough recovery solar input to charge my batteries and run the inverter. As for the load output, it clearly states that it is 300w not 80 amps as some have claimed advertised. The load function on these controllers is only designed to run low powered lighting, timers or relays not power your home. The 80 amps go to the battery people.
Perfect
Comentado en Australia el 25 de mayo de 2024
12volt solar connection
Sesin
Comentado en México el 7 de febrero de 2024
Me gustò que es lo que yo esperaba y funciona muy bien.
Old Crow's
Comentado en Canadá el 2 de junio de 2023
I've been trusting this controller for my off-grid living. It's been about 2 months since I started using it and it's been working great so far.I've connected this charger to 6 solar panels in parallel. Each panels is 260watts, 37.7 Vmax and 8.8Amax.It's then charging 9 regular lead acid car batteries in parrallel (so 12volts). For a complete explanation see my youtube channel worldcitizen and Old Crow's Classic CarsThis charger has a maximum input voltage (from solar panels) of 48volts, and also has amperage rating of 80amps which is Huge....although I've never used nearly that much amperage.It was easy and fast to install although the instruction manual is barely understandable.
BTC4ME
Comentado en Canadá el 9 de julio de 2022
I connected this unit to a 900w system and am pleased with the ease of installation and product performance. The monitoring screen is a useful feature. I like this controller and recommend it; priced well.
Productos recomendados
Mex $735.00
Mex $ 396 .00 Mex $396.00
Mex $271.51
Mex $ 162 .00 Mex $162.00
Mex $1,160.15
Mex $ 510 .00 Mex $510.00
Mex $1,097.42
Mex $ 548 .00 Mex $548.00