No hay artículos en el carro
No hay artículos en el carroLen K.
Comentado en Canadá el 26 de agosto de 2024
I am disassembling an 1987 OMC Cobra stern drive lower gear housing to install an updated detent and needed the HD snap pliers to remove two heavy duty snap rings, so I purchased these two. The holding bar was a little to big to allow to reach the two snap rings deep in the propeller shaft, so I removed it and compressed the rings with the blue holding device. I had those two heavy duty snap rings out within a couple of minutes. Couldn't be happier. Because each holding bar is the same, I will cut one down to fit inside the shaft and move the holders from pliers to pliers if needed.
Robert Culbertson
Comentado en los Estados Unidos el 20 de octubre de 2024
This tool will make your life easier when dealing with heavy duty snap rings.
Abraham A.
Comentado en México el 30 de enero de 2024
Me gustó mucho se ve de buen material, es panel de cristal y es muy espacioso
Johnnie Danger
Comentado en los Estados Unidos el 16 de septiembre de 2024
Got this tool for one specific purpose, the giant snap ring on holset turbos for when I need to clock it. Used the 90° tips and all the way open was just enough to grab it
Felipe Jordan Perzabal Lickon
Comentado en México el 9 de julio de 2023
Es bastante chulo, con cristal templado lateral y frontal, ya incluye los 4 ventiladores (3 frontales y 1 trasero, no viene con HUB; no puedes controlar la secuencia de colores de los ventiladores pero aún así se ve bien), tambien incluye el antipolvo magnético y bastantes tornillos, tiene buen espacio para el acomodo de cables por la otra lateral.😁
Customer
Comentado en los Estados Unidos el 11 de junio de 2022
Works as it should good value for the money
Tony SAO
Comentado en México el 5 de diciembre de 2022
Me gustó mucho, más de lo que esperaba.Incluso pensé que parecería de menos calidad, pero se ve bastante bien por el precio... el plus es que trae ventiladores incluidos que aunque no sean los mejores me han dado buenas temperaturas hasta ahora.EDIT: El color de los RGB sí se puede "controlar", hay un cable que se conecta al botón de "reset" y eso cambia los colores... pero no se pueden configurar, solo cambiar.
Aletz
Comentado en México el 12 de noviembre de 2022
Si no quieres gastar tanto y apenas vas empezando te recomiendo este gabinete sus 4 ventiladores ayudan mucho aun que ni tiene control para bajar el RPM esta padre aun así cumple con enfriar muy bien mi pc llega a 32 c y jugando juegos pesados 50 o 60c
Laif Matsuk
Comentado en los Estados Unidos el 1 de octubre de 2022
I really only got these to do one job that required a large set of snap ring pliers. They worked well enough for that job but I would recommend getting something a bit nicer if you foresee yourself using these more than a handful of times.The build quality is okay but not great. I noticed a small bend in the tips after the first 2 uses, nothing major but enough that I can only see getting a dozen or so uses out of these before needing a new set of tips.The ratcheting mechanism feels rather cheap and I never found it very useful to be perfectly honest. It seems to work okay however given the option I would have rather just not had it to begin with
Antonio Emmanuel Marín Reyes
Comentado en México el 11 de julio de 2021
Muy padre honestamente creo que recibí algo mejor de lo que compré, aún estando conciente que es para mí primera computadora gamer
Javier L
Comentado en México el 27 de febrero de 2021
Llegó antes de lo establecido y en perfectas condiciones, luce muy bien
Gustavo Martínez
Comentado en México el 30 de enero de 2021
Me gusta mucho la distribución del gabinete, fue bastante facil esconder los cables. A mi hijo le encantaron los ventiladores RGB.
Productos recomendados