xTool Enclosure para Máquina de Grabado Láser 62,5 x 61 x 31 cm, Carcasa Protectora para Láser, Ventana Transparente para Protección Ocular, Ignífuga, Impermeable, Insonorizada, Bloquea Humo

Easy to put together and very sturdy. Is flush against the sides, keep in mind if you have cable management on the sides

The xTool Enclosure has proven to be an indispensable addition to my workspace, providing a seamless blend of functionality and practicality. With my addition of internal lighting, this enclosure has truly transformed my work environment.The enclosure itself is thoughtfully designed, offering a spacious interior that accommodates various tools and equipment. The durable construction and sleek aesthetics ensure a professional appearance while maintaining sturdiness. The added internal lighting has taken this enclosure to another level. The well-placed lighting illuminates every corner, making it easy to work with precision, even in dimly lit conditions.Another notable feature is the enclosure's noise reduction capabilities. It effectively dampens the sound produced by various tools, creating a quieter and more comfortable working environment. This is particularly beneficial when working on lengthy projects that require extended periods of concentration.In conclusion, the xTool Enclosure with added internal lighting has exceeded my expectations. It has become an essential tool in my workspace, enhancing both the practicality and aesthetics of my setup. If you're seeking an efficient and well-designed enclosure that can be tailored to your needs, look no further than the xTool Enclosure.

The build quality of the enclosure itself is quite good. Very minor leakage of fumes,but a stronger fan could be added if you intended to burn anything that produced a lot of smoke. As it is intended to be a portable enclosure that can be folded up and moved easily, it works very well.Service and support is very good. The power supply for the fan did not fit the fan (minor quality control issue) but xTool we quick to send replacement parts. I did not ask for a replacement, as I'd gone ahead and fixed the problem myself, but xTool made sure to send replacement parts to ensure that all was well Kudos!In a nutshell, I'm happy with the enclosure.

This product is a must if you want to engrave. It protect real good the smoke and evacuate it properly. The yellow screen is good to look at your laser i still wear the google protection for my eye for extra precaution. I will buy again from this buyer great after sell answer amd deliver the next day really well pack.I recommand this product and this seller for both good service and great quality. Next buy will be the rotary and im sure gonna buy it from them.

I have a 5W D1 that I mostly use for engraving wood - no cutting. Occasionally I will engrave a ceramic tile. I’m a hobbyist and don’t put many hours on the machine (use it a couple times a week tops). I’ve been running my D1 in the garage during summer with two doors open to manage smoke and fumes, but that is not viable for winter. I wanted to move the machine into the basement, but have no working windows to vent through and didn’t want to bother with drilling new 4” holes to put in a new vent. My work area is near an old and unused central vac vent that is about 2” gray PVC. I took a chance on this enclosure with concerns that the fan wouldn’t be powerful enough and the 3”ish hose would not work in my situation.The supplied hose has about a 3” inner diameter (a little over 3”) and fits over a 2” white PVC coupling with some wiggle room that I sealed with duct tape. The 2” coupling is a little big for the 2” gray vent pipe, but close enough that the duct tape sealed it up.Before burning anything with the laser, I ran the fan to be sure air was moving through the vent. I checked outside, and the grass under the vent was moving from the air flow (vent is > 16” above the grass) and I could feel a lot of air moving. I burned a few items (pine, maple, and cardboard) and noticed no smoke exiting the enclosure. There is some smoke smell that gets out, but only noticeable within a couple feet of the enclosure and where the tape is sealing up the vent connections. I haven’t had a chance to do any tiles yet, so I don’t know how well that odor is contained. Overall, I am pleased with the fan and vent set up for my situation, but if you desire no odor to escape, the fan doesn’t accomplish that for me. It works well enough that I don’t plan to move the laser into the garage anymore though.The enclosure fits around the frame snugly. Without risers, the left side of the frame blocks much of the way inflow vent. The enclosure is not airtight, however, so there is other air that flows in. I don’t know if it’s balanced flow though. The enclosure is sturdy. It does smell like a smokehouse inside after a few burns. The inside probably needs to be wiped down occasionally to remove buildup.Some minor complaints is that once you extend the exhaust hose, it doesn’t go back to being collapsed. I don’t need it fully extended, but it doesn’t stay collapsed when I push it back together. Ends up being extra length for the air to move. The fan does not have a grill on it, so it would be possible for fingers to get in it while running (if feeling around on the inside if the enclosure for some reason). The plastic blades are dull and would not do any damage though. Also, it would be nice if the lid had some mechanism to hold it open. Not a big deal though. The biggest complaint is the holes for mounting the fan. They weren’t perfectly aligned with the holes in the fan and exhaust port, so it took a bit to get them in. Also, the holes were drilled small, so the screws had to be threaded through the holes in the enclosure, which made the misalignment that much more annoying. Eventually I got them through without having to enlarge the holes or drill new ones.I did install the fan backwards initially and didn’t notice until it was turned on and air wasn’t blowing out. I’m not sure if I missed something in the instructions or on the fan to indicate installation orientation, but that will be something to watch for.Overall, the enclosure so far does what I need it to do: keeps laser light mostly enclosed and away from wandering eyes (although I can’t guarantee the window blocks the harmful light), it doesn’t allow any noticeable smoke into the room, and manages most of the smell. I have no regrets in the purchase after having it a couple weeks.