Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Xnrtop Sonda de Temperatura de Superficie con Sensor Tipo K, Termopar de Alta Temperatura, -50 a 500 ℃

4.3 (43) Escribir comentario
Envío gratis en pedidos superiores a Mex $600.00

Mex $421.50

Mex $ 219 .00 Mex $219.00

En stock

Acerca de este artículo

  • Nombre del producto: sonda de acero inoxidable tipo K para termómetros digitales.
  • Buen rendimiento: pieza de medición de temperatura de malla, velocidad de reacción rápida.
  • Diseño único: esta sonda de termopar de superficie está diseñada para medidas de temperatura de superficie plana o convexa. Equipado con funda protectora, es muy cómodo de usar.
  • Rango de medición: -50 a 500 °C.
  • Aplicación: para aplicaciones de temperatura de uso general. Compatible con instrumentos de medición de temperatura tipo K.


Descripción del producto


Joni
Comentado en los Estados Unidos el 5 de marzo de 2025
not useful I returned item
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Customer
Comentado en los Estados Unidos el 16 de marzo de 2025
Seems to be working after I was able to put all the screws back in it that fell out I assume during shipping
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
Gary E. VanderPutten
Comentado en los Estados Unidos el 24 de enero de 2025
We have attached individual K type thin wire sensors to key hot water pipes in our building; we use an OMEGA hand held meter. The sensors are seated firmly with insulated tape and are the most accurate (matches our FLUKE) we have found. . The new OMEGA touch sensor must remain in contact for about 30 seconds and is typically 5 degrees less than the permanent one, but accurate enough knowing that difference.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
BF
Comentado en los Estados Unidos el 1 de enero de 2025
Solid, well made, accurate, easy to use, very inexpensive.
patricia
Comentado en los Estados Unidos el 7 de julio de 2024
Well built and attractive
Ayraykay
Comentado en Canadá el 2 de septiembre de 2024
This is a great display stand, heavier duty than it looks in the photos. Super sturdy and the height is adjustable. Super easy to put together. No complaints!
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Tech
Comentado en los Estados Unidos el 13 de abril de 2024
Compared it to a Cooper temp clamp and this thing was almost 20 degrees off. Used it for about 30 seconds then found the nearest trash can. Unless you’re trying to read 1000 degrees and a little variance doesn’t matter this thing is not worth getting.
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Emmy
Comentado en los Estados Unidos el 28 de agosto de 2021
pretty good for the value
Productos recomendados
BlueStars 80BK-A Termopar tipo K, sonda de temperatura

Mex $404.38

Mex $ 194 .00 Mex $194.00

4.3
Elegir
driver de temperatura LED digital STC-1000 de 110 V - 220 V, driver de temperatura digital de microordenador, termostato de refrigeración de calefacción, 2 salidas de relé con sensores de

Mex $747.85

Mex $ 358 .00 Mex $358.00

4.3
Elegir
Controlador de Temperatura PID Digital MC701 Tipo K Entrada de Sensor PT100 Salida de Relé SSR

Mex $449.00

Mex $ 211 .00 Mex $211.00

4.6
Elegir
Atlas Scientific PT-1000 - Kit de temperatura (50 mm)

Mex $1,591.98

Mex $ 652 .00 Mex $652.00

4.4
Elegir
Termometro infrarojo de alta Temperatura alto desempeno

Mex $19,131.04

Mex $ 1,881 .00 Mex $1,881.00

4.8
Elegir
Controlador de temperatura electrónico tipo K 0 ~ 400 grados controlador de temperatura JTC-903 medidor de panel de temperatura digital(AC 110V220V)

Mex $1,125.46

Mex $ 506 .00 Mex $506.00

4.3
Elegir
TK4M-14RN TK4M-14SN TK4M-14CN Controlador de Temperatura PID con Pantalla LED Original auténtica(TK4M-14RN)

Mex $2,867.90

Mex $ 1,175 .00 Mex $1,175.00

4.3
Elegir
AC85-264V Alta precisión PID inteligente controlador de temperatura termostato relé TC/RTD entrada CH402

Mex $412.00

Mex $ 206 .00 Mex $206.00

4.5
Elegir