No hay artículos en el carro
No hay artículos en el carro3/16 pulgadas x 150 pies. Se utiliza para hacer líneas de corte precisas a través de muchos productos de vinilo impreso y película protectora. El filamento de corte siempre está en el borde mismo de la cinta, produciendo un corte perfecto cada vez. Produce líneas de corte increíblemente rectas. Conformable alrededor de formas y ángulos irregulares. Carretes de plástico ergonómicos y protectores para un fácil manejo y aplicación.
Shawn
Comentado en Canadá el 22 de octubre de 2024
Half the price than the green brand name and I find it easier to use than their system of starting the pull of the string.
Chloe R.
Comentado en los Estados Unidos el 7 de enero de 2021
I do a lot of graphic installs. This is an excellent and inexpensive replacement for the 3M knifeless tape.Adhesion could be more robust but it gets the job done.Leave yourself a healthy length to start!Happy to have found this product!!
Cassandra Jahnke
Comentado en los Estados Unidos el 27 de marzo de 2020
1st written review ever cuz this stuff is soo amazing!At first, I had ordered the 3M brand knifeless (I am a huge fan of anything 3M).. I ran out of it during a project and needed more! I came across this stuff and decided to give it a try! Soo glad I did! This specific brand is WAY easier to work with, sticks better and honestly even creates better cleaner lines.. and the price difference and amount is UNBEARABLE! U get way more tape for a much cheaper price.. and it truly works better! Soo pleased with this product! I will never use anything else! Thank u soo much!
Tyrone W. Jr
Comentado en los Estados Unidos el 17 de diciembre de 2019
Love using this for use while wrapping, great quality product. The first few times it does take some getting used to but works just like the similar 3M varient.
MB
Comentado en los Estados Unidos el 5 de julio de 2018
I only have experience with 3M "finish line" and while it is a great product it's expensive for what it is. I wanted to try the "design line" but came across this and figured I would give it a try instead. There wasn't any reviews for this product in particular so I wasn't sure if I should. After using it I'm happy with the results. I feel it deserves a detailed review especially since there aren't any at this moment lol. Enough babbling, here are my thoughts compared to finish line.The filament is indeed metal wire. I'd say it's between 36-40 gauge so breaking should not be an issue. The wire filament cuts through vinyl really well. It cuts through carbon fiber vinyl much easier than finish line. It also starts much easier. I always have trouble starting the cut with finish but with the wire I have no issues. The wire is on the very edge unlike finish line being in the middle. This is a love, hate thing for me. I like that it makes for easier cutting and the fact that you can put it right on the edge of work. I dislike that this can cause you to have more tape to pull out after the cut. This depends on which way the put the tape though. The wire does really well in corners but you have to use relief cuts to manipulate it. This makes it a little more time consuming but the amount of time it saves all together makes up for it.A few things that I've learned to be helpful. Fold the end of the tape on the roll after each cut. It's a pain getting it started again if you don't do this. The wire will prick you and it doesn't feel good lol. Also the wire is only stuck to the tape so it tends to come off of the tape easily. This has only been an issue when trying to start without the end folded. I've not had any problems with the wire coming off the tape while laying it down. Even after pulling it up repeatedly it's stayed in place on the tape. Make sure to firmly press the tape down once you've got it where you want it. I haven't had this happen but I feel the wire could be pulled out from under the vinyl if it's not firmly stuck to your work. Keep constant tension and angle the wire back away from the cut. That goes with any of these filament tapes. Lastly, if you make relief cuts make sure to carefully pull the waste tape in those areas. It can break off causing you to lose your lead and having to peel up the edge of the vinyl to start it again.Conclusion: This product is a much cheaper alternative to the 3M tape. It performs really well and in some areas better than the competition. I don't feel this will completely replace the 3M finish line for me at least. It takes a little longer to lay curves with having to make relief cuts. I will go for the wire more will still have the finish line when time is an issue. I still recommend this over the 3M.
Productos recomendados
Mex $342.10
Mex $ 177 .00 Mex $177.00
Duck Brand Clean Release Cinta de pintor, Rollo individual, 1.88 Inch x 60 Yards, Blue (Single Roll)
Mex $139.70
Mex $ 71 .00 Mex $71.00
Mex $554.74
Mex $ 255 .00 Mex $255.00
Mex $816.47
Mex $ 416 .00 Mex $416.00