No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Banco de trabajo tradicional
El WORKESS viene con un banco de trabajo tradicional que te permite tener una mesa resistente y puede soportar hasta 420 libras de presión, por lo que puedes trabajar sin dudas.
Cuatro funciones
Mesa sólida: Para uso como banco de trabajo convencional
Soporte de bola: Para movimiento flexible de artículos
Soporte de rodillo: Como extensión para aserrar mesas
Soporte en V: Permite el centrado de materiales redondos
Un total de diez engranajes
El trabajo permite un ajuste de 10 pasos entre el rango de altura de 33 a 50 pulgadas. El doble mango de bloqueo y el diseño de cuña de la columna de elevación te permiten sentirte seguro y fácil al ajustar los engranajes.
Capacidad de carga sorprendente
La mesa requiere una gran capacidad de carga, por lo que puede soportar 440 libras de artículos de trabajo, rodillos multidireccionales y direccionales con una capacidad de carga de 200 libras, y soportes en V que también pueden soportar 100 libras, todo por encima de los estándares de la industria.
Almacenamiento de herramientas
En la posición de la barra inferior, hemos perforado muchos agujeros, lo que es conveniente para almacenar varias herramientas, y puedes acceder y almacenarlas en cualquier momento cuando trabajes.
Muévete con facilidad
El soporte de rodillos Workness pesa solo 26 libras y se puede mover fácilmente, por lo que es ideal para trabajadores domésticos y artesanos.
Jak
Comentado en los Estados Unidos el 2 de febrero de 2025
Works better than any feed table I’ve ever had
miguel angel sanchez aedo
Comentado en México el 21 de enero de 2025
Está muy fragil
JB
Comentado en los Estados Unidos el 29 de julio de 2024
This stand works reasonably well for my use. The build quality pays perfunctory attention to 'being right'. For example, the flange welded to the rotating section isn't square to the tube. Another nit; the plastic feet fall off at the slightest push. They should have been designed to grip tighter to the leg or have a mechanical fastening method. For the price, I caught it on the Prime day sale, I am satisfied with this helpful addition to my shop equipment.
batfink
Comentado en los Estados Unidos el 19 de diciembre de 2024
Bought one of a other brand it was really bad but this one is great for my shop,ease assembly ,function,value,great size,very strong
gary williams
Comentado en los Estados Unidos el 17 de noviembre de 2024
I needed another saw horse type stand. After evaluating several, I decided this would probably suit my needs. I found it to be heavy, well balanced and well made. It has several rollers as well as a flat top option that make it especially useful in a woodworking shop or on a garage pad for cutting down large pieces of sheet goods. The only thing that would have made it even better would be that it was collapsible, but with the way it is designed, that isn't feasible. At this price point, I would definitely buy this again.
Central Coaster
Comentado en los Estados Unidos el 6 de enero de 2024
Is this a Beta tester ? Sure seems like it. Basic design is good but needs improvement in many ways.The vertical height is excellent- taller than most. But it is only adjustable in 2" increments with the pins. If the adjuster bars had also been drilled on the alternate faces and offset, the adjustment could have been 1" !The plastic handled clamps feel extremely fragile .They are so bad I dare not use them so am stuck with 2" vertical increments which is unusable for an outfeed roller stand.The Instructions state you need 2 x 13mm "spanners" .Wrong -you need a 14mm for the bolt heads and a 13mm WRENCH (!) for the nuts.The tiny V roller acorn nuts are loose/fell of in shipping. You'll need M5x0.8 acorn nuts+loctite to replace the lost ones.To use the "V roller" the Instructions have you remove the 4 nyloc nuts and bolts that secure the "trestle head". That's a ridiculous inconvenience and isn't declared in the Listing. Worse ,it actually isn't necessary . If you rotate the rotary head as far as possible, the "V roller" will work well enough even though it isn't perfectly vertical. Why not use folding-latch pins instead of nuts+bolts ? It would then be a fast tool-less change.The square tubes on the "Trestle Head" did not align with the tubes on the "Rotating Head". I had to bend them to get the bolt holes to align.Seems like nobody actually tested this item !Other than these many design/manufacturing defects, it is a good piece of equipment.
Productos recomendados
Mex $4,623.65
Mex $ 1,881 .00 Mex $1,881.00
Mex $482.53
Mex $ 231 .00 Mex $231.00
Mex $761.51
Mex $ 373 .00 Mex $373.00
Mex $2,947.48
Mex $ 1,208 .00 Mex $1,208.00