No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Especificaciones del producto:
Características de pegar:
Aplicaciones:
Directrices de uso:
Bruce Revor
Comentado en los Estados Unidos el 16 de marzo de 2025
Works good
Karl in TN
Comentado en los Estados Unidos el 18 de junio de 2024
This stuff works very well and VERY LITTLE is needed to make a superb joint. Use the very narrow, pointy nozzles. They are just right for the very tiny joints although very tough to pump.This stuff is getting harder to pump! I even found a plasic cap for the tip but it got nearly solid in the tube. Needed stirring before it could be used this last time. I WILL get something different for the next project.
willie
Comentado en los Estados Unidos el 17 de mayo de 2024
I use .007" stainless steel stencils, and an industrial razor blade to apply the paste to the boards I build. Boards are cleaned with IPA immediately before applying solder paste. I use a hotplate system to reflow. This paste worked well.
David Stedman
Comentado en los Estados Unidos el 21 de agosto de 2023
Worked very well, melted just like solder using a lighter touch. little tiny applicator needles they give you for the syringe was perfect. Used it on my instrument panel circuit board for my '89 Chevy truck The plug for my speedometer pulled out of the circuit board and I was afraid using a soldering iron could damage a board that was over 35 years old so this liquid solder and using a cigarette lighter was perfect melted very low temperature work like a charm speedometers working again.
Give It a HELPFUL Please!
Comentado en los Estados Unidos el 20 de septiembre de 2023
The product came in a nice colored pouch with 2 narrow metal heads and two plastic nozzles. It's a decent resealable bag so the solder pen and heads go back in the bag to keep everything organized in my office.The metal tips are great when applying the solder paste while holding the rework gun without worry the tip will melt and the plastic tips are great for precise positioning of the solder on the boards you're working on.I started removing Mics from PCB boards and charging ports and my job was quite hard not having something that had a lower melting temp which is what I needed. Using regular solder and heat caused my components to be toasted after all the heat and the ports melted by the time I got the solder to melt.While with this new solder paste pen I can actually apply solder without the worry that my components will be destroyed while melting back the new parts.Overall I'm happy I got to experience what it's like to use a solder paste with a lower melting point that standard lead solder. Though they do make such a solder paste with even a lower melting point at 138 deg.Overall there's nothing I would ask for more. And I'm very happy happy with everything about the product. Will try to attach some pictures from the next job I do.
Productos recomendados
Mex $119.99
Mex $ 61 .00 Mex $61.00
Mex $476.05
Mex $ 257 .00 Mex $257.00