Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Winch in Winch Out – White – Interruptor de palanca grabado con láser 7 pines, interruptor momentáneo impermeable, carcasa negra / ON-Off-ON DPDT iluminado interruptor basculante para auto, camión,

Envío gratis en pedidos superiores a Mex $600.00

Mex $468.66

Mex $ 239 .00 Mex $239.00

En stock

1.Tamaño:Winch In Winch Out


2.Color:Rojo


Acerca de este artículo

  • Interruptor basculante de encendido/apagado de 7 pines con diseño DPDT (tiro único de doble polo), inlación rápida y sencilla, enciende y apaga libremente tu accesorio.
  • Interruptor ilumido: dos LED integrados de alta calidad emiten luz suave ilumir los patrones, fácil de encontrar el interruptor en la oscuridad
  • Duradero: hecho de pláco de alta calidad y pines bien conductores; patrón grabado con láser que no se desvanece
  • plia aplicación: interruptor basculante estándar de la industria que se puede utilizar controlar luces estroboscópicas/de emergencia en ciones, coches, barcos, UTV, ATV, remolques, motocicletas, vehículos de emergencia, etc
  • Construcción de grado marino e impermeable IP66: cabe fácilmente en panel de aluminio de alta calidad, a prueba de arañazos y resistente a la corrosión, con tapa sellada de goma para todos los enchufes herméticos al polvo y a prueba de residuos.


Especificaciones:
Uso previsto del producto: interruptor basculante LED proporcio u función simple de encendido y apagado varias aplicaciones. Todos los símbolos están grabados con láser directente en la cara del interruptor zar u larga vida útil de la imagen. Tenemos muchos diseños acomodar coches, ciones, SUV, jeeps, barco, rastreador y muchos más. Interruptor basculante LED de encendido y apagado de 20 perios y 12 voltios Configuración de pin - 5 pines Interruptor de encendido y apagado de doble polo. Grabado con láser Diseño: basculante de superficie dura negra. Clasificación de impermeabilidad IP66. Sin barreras traseras entre termiles Taño como los interruptores ARB (misma configuración)
Taño de la superficie: 5 cm x 2,5 cm.
Orificio de montaje de taño estándar: 1.4 pulgadas x 0.86 pulgadas
Función: La luz superior está encendida cuando el interruptor está presiodo. El LED inferior es no empotrado y se puede conectar ser el circuito del tablero bos LED tienen terrenos sedos


Hoosier Farmer
Comentado en los Estados Unidos el 15 de marzo de 2025
Works great with my Super ATV 3500 lb winch.Fits the factory dash hole on my Kubota RTV x900.
Jonathan M Lee
Comentado en los Estados Unidos el 30 de diciembre de 2022
In order to wire this switch up where the lights are always on you need to do this.Pin 1, 2, 3, 5 to 12v accessory. 4 an 6 to your winch up an down. Pin 7 is ground wire.
Joe
Comentado en los Estados Unidos el 26 de enero de 2021
Great replacement for my stock winch switch on my 2020 RZR XP41K High Lifter to match the color of my other switches. Monetary switch so it works just like the stock switch in the sense that you have to keep the switch depressed, it's not on/off like some reviews mention.Only thing I didn't like was the wiring diagram. If you wire it the way the picture shows, the switch doesn't light up until you press it, then the upper or lower LED will activate depending on which side of the switch is being depressed. I wanted the LEDs to always be lit when the key is ON so I could see the switch at night. So I spent hours making jumpers and trying different configurations to get it as close to what I wanted as possible.I had to jumper pins 1,3,5 from battery, 7 and 4 to WINCH IN and 6 to WINCH OUT to get it to work and for the switch to always be lit up. Only problem with this way is now when I press WINCH OUT, both LEDs turn off while being depressed, whereas both LEDs remain lit when pressing WINCH IN. Maybe a ground issue but I can live with it.
James D.
Comentado en los Estados Unidos el 22 de septiembre de 2021
You can wire the top and bottom light independently to illuminate all the time, or when switched on, or have the bottom lit all the time and the top come on when you flip the switch.
TR6ACE
Comentado en los Estados Unidos el 3 de diciembre de 2020
This UTV was farm vehicle and old switches sucked - no more - worked out of the box and will see on longevity but for price you cant ge them installed for the price of the switch
Productos recomendados

Mex $566.94

Mex $ 306 .00 Mex $306.00

4.5
Elegir

Mex $179.00

Mex $ 100 .00 Mex $100.00

4.8
Elegir

Mex $799.00

Mex $ 383 .00 Mex $383.00

4.3
Elegir