No hay artículos en el carro
No hay artículos en el carroVemos un futuro basado en grandes marcas, productos y personas. En todas las facetas de nuestro negocio, aprovechamos las fortalezas de nuestra infraestructura global para maximizar los beneficios de los tres.
Customer
Comentado en los Estados Unidos el 26 de agosto de 2024
This is one high-quality piece of American made steel. This company makes these here in America but also some in China so if buying American made is important make sure you look closely before you make the purchase.This is the only one you’ll ever buy.
Julio cesar
Comentado en México el 18 de julio de 2024
Es un tornillo de banco muy robusto y de buena calidad , en imagen no se aprecía pero es bastante pesado y sólido, 10 de 10 👍🏽
Joe
Comentado en los Estados Unidos el 26 de marzo de 2022
I've owned this vise for a few years now and love it. I don't abuse it, but put it through the paces and it has held up remarkably well, with zero issues. It needed a little dressing when I got it, but the alignment was quite good even so. The lockdowns are tight and hold securely, as do the jaws. I wish they would have used hex bolts instead of phillips to hold the jaws, but that is easily remedied. Overall, bang for buck, one of the best vises I've owned.
Paul D Scott
Comentado en los Estados Unidos el 6 de diciembre de 2022
The Good:The vise is well designed and its castings are good. The rotary locking mechanism is secure and of good design.The Expected:Every part of the vise was full of iron filings and all moving parts had to be cleaned and greased. The worst were in the threaded holes for the jaw screws, they need to be cleaned at a minimum but running a tap through would be even better.Lead screw was straight enough but I had to sand and file the burrs off for good action.I had to do some filing to fully align the jaws but given the slop in the lead screw that felt more obsessive than necessary.The Bad:There was no oil behind the pipe jaws and the threads were full of iron filings. If it had ever gotten damp even for a second it would have had to be drilled out.I had to use an impact driver to remove the ones on the pipe jaws. They had been tightened with a power tool and were crooked. They are M6- 1.0 bolts and you will want to replace the Phillips heads with hex asap.
Consumer Zero
Comentado en los Estados Unidos el 7 de enero de 2021
Very well built and very heavy in a good way. Such a beast! I like that the unit is enclosed and protect from dust. The hardware was hard to find I wanted to be installed properly as it will be there for years. Props to broward bolt for hooking me up with the hardware. 5/8 in grade 8 bolts. Use smaller washers on top and regular washer with lock washer on bottom. A great addition to your work bench. Buy something good as it will last for years
Rich
Comentado en los Estados Unidos el 21 de agosto de 2020
I've used a lot of this exact style vise at work. For the money they are hard to beat even if you destroy them in several years. We have used one in an outdoor welding shop onboard an oil rig for over a year now and it gets used and abused every day. I doesn't look pretty and might be a little sloppy, but it still holds things tight. We have another one inside an engineering workshop and it is holding up very well. Gets used daily for hard projects! Now I'm sure you can get a bad one now and then, but for me, the abuse I've seen offshore makes it plenty good for my shop at home. I bought this one for the house, showed up in 4 days in a nice box from the MFG without a scratch or dent. Don't think about it...just buy it.
Productos recomendados
Mex $399.00
Mex $ 199 .00 Mex $199.00
Mex $239.19
Mex $ 121 .00 Mex $121.00
Mex $299.99
Mex $ 158 .00 Mex $158.00
Mex $313.00
Mex $ 159 .00 Mex $159.00
Mex $1,427.10
Mex $ 685 .00 Mex $685.00