No hay artículos en el carro
No hay artículos en el carroJuego de desarmadores multipuntas de matraca, tamaño de punta #0, #00, #000, #1, 0.05 pulgadas, 0.7 mm, 0.8 mm, 0.9 mm, 1.2 mm, 1.4 mm, 1.5 mm, 1.8 mm, 1/16 pulgadas, 1/8 pulgadas, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 3/16 pulgadas, 3/32 pulgadas, 4 mm, 4,5 mm, 5 mm, 5.5 mm, 5/32 pulgadas, 5/64 pulgadas, 7/32 pulgadas, 7/64 pulgadas, 9/64 pulgadas, PL1, PL2, PL3, PL4, PL5, PL6, T10, T15, T20, T3, T4, T5, T6, T7, T8, T9, punta estilo Pentalobe, Phillips, ranurada, torx, magnética, estriada. Material de broca: aleación de acero. Almacenamiento de puntas: estuche separado. Extremo único, punta magnetizada.
willems patrick
Revisado en Bélgica el 9 de julio de 2024
Nice set, very much complete!
Carlos
Comentado en México el 23 de julio de 2024
Quality
OLTORMEX
Comentado en México el 8 de junio de 2024
Magnífico para pzas. pequeñas
Big D
Comentado en Canadá el 25 de junio de 2024
Great Wiha set when it comes to micro 4mm hex bits. I like that it has the Pentalobe bits Pl1, Pl2, Pl3, Pl4, PL5,PL6 which open Apple electronics. Comprehensive set and really could use Microstik, Triangular and lifter. Best of both worlds purchased Wiha Go-Boxes for Torx iP and WERA ESD complete set of precision screwdrivers. Life is short too be aggravated by inferior tools. Big D
Antonio Ventolero
Comentado en México el 1 de marzo de 2024
Michelangelo
Comentado en los Estados Unidos el 16 de noviembre de 2024
Wiha tools are made to exacting standards. I notice that these bits fit perfectly in every application. Other brands I have used are not nearly as precise, and these bits are also made of much higher quality steel than most others, so they will not wear out under hard use. The case they come in is well marked for sizes and the foam holds the bits firmly in place, so spillage is not a problem. The ratchet and driver are of good quality and a pleasure to use. They are of course more expensive than many other brands, but I find having good quality tools is always worth it in the long run. Highly recommended.
Rubén Santa Anna
Comentado en México el 24 de enero de 2024
Es necesario decir que se trata de un set de micro puntas de precisión por lo que no está destinado a trabajo pesado. El usuario de este kit serán técnicos e ingenieros que arman o reparan aparatos electrónicos, biomedicos, ópticos u electromecánicos de pequeño tamaño.Las puntas son de excelente calidad, el acero se aprecia sumamente duro pues a pesar de usarse en tornillos apretados e incluso dañados no se nota deformación en la punta, ni siquiera en las más pequeñas.En mi caso, se utilizan principalmente para darle manteniendo a impresoras 3D y equipos de medición electrónicos y parece que el conjunto puede durar años en estas aplicaciones por la calidad que tiene.El kit incluye un adaptador de 1/4 hexagonal a 4 mm que es la medida de todas las puntas. Este adaptador permite usar las puntas con cualquier bit holder de 1/4 o con la matraca incluida, lo que aumenta la versatilidad de este conjunto.En resumen es una excelente compra, espero tenerlo mucho tiempo y desquitar su costo que si es algo alto.
Uther Pendragon
Comentado en México el 1 de septiembre de 2024
No se pudo cargar el contenido.
Pedro Guzmán
Comentado en México el 18 de abril de 2023
Los bits son una chulada, lo unico malo que vi, es el bitholder, se ve algo feito, no tiene pinta de ser algo de buena calidad, pero por los bits y la rachet, lucen de muy buena calidad.
Gregma80
Comentado en los Estados Unidos el 19 de mayo de 2021
So to sum this up I’m a longtime Wiha fan. They make great tools and some of the best steel used on their bits. However it shows... *country of origin:China* and I contacted KCTools about this. The KCTOOLS rep live chatted with me and told me it’s a German/Vietnam made product... which it was to be fair. So after telling him this he told me he was going to change the listing and HE DID?! But, a couple years back Wiha had moved production to China and with supposedly the same specs and materials as their German branded Wiha. However, we all know China is a quantity over quality and Wiha cleverly announced a “collaboration” with China on a Xiaomi Mijia 24/piece precision screwdriver set. To be fair the set is only $29 (at this time) and I can tell you those bits are NOT Wiha grade. Look at the reviews and you’ll see broken bits and all. My point is after telling the rep this (because I am going to send these back and look into Felo) he insisted on changing the Amazon listing *country of origin:Germany* which is simply it true! This is why I’m leaving a poor review. I can’t (and won’t) speak on the quality because I haven’t used them yet and to be fair the bit set seems to be of quality steel. The ratchet is nothing special and the tolerances seem off. But the ESD seems to be the PICO quality finish I have on an older set. My point being is I don’t know why they’re not being upfront about this? I’m sure people will do their own “due diligence” and see for themselves. But, I refuse to pay $100 for a Chinese manufactured set trying to pass for German made. I got news for everyone Wiha is now MADE IN CHINA... and this listing should not say Germany for Country of origin. But the rep said he was changing it from China back to Germany?! *Poor form KCTOOLS*Edit: So I have a Kershaw Cryo that needs the torsion bar replaced. Problem is I already chewed up two brand new T6 bits. One was a Walmart special (no surprise there) and the other was from an iFixit kit. Well the Wiha bits did there job and performed as I hoped they would, breaking the blue loctite with relative ease. I couldn’t move one of the screws even a little with the other two bits... so the bit quality is definitely there. I lost a good portion of my tools due to a rather nasty breakup so I have some catching up to do, but I will be keeping this set unless something drastic happens. At least the bits were properly heat treated and to be honest that’s really what I bought this for along with the 1/4” adapter. So I’m going to raise my rating because the tools did their duty and that’s all that matters in the end.
Salomón
Comentado en México el 3 de octubre de 2019
La calidad de estas micro brocas es muy buena, las he utilizado para reparar celulares y darle mantenimiento a equipo de computo y han funcionado a la perfección. Vienen en un estuche de metal, y las brocas vienen que con una ligera capa de aceite para protegerlas. Es para prevenir cualquier problema de oxido. Son muy precisas. Es un conjunto que me durara muchos años. Sin lugar a dudas lo volvería a comprar.Wiha 75965 Caja de almacenamiento de acero con carraca de microbrocas de precisión
TbK
Comentado en Canadá el 27 de enero de 2019
Covers a wide range of uses. Good quality.
J. Gonzalez
Comentado en México el 22 de septiembre de 2015
Definitivamente no tuve mejores herramientas que estas, los cortes son precisos y los materiales excelentes sin duda un kit para pros. Cuidado con el metal de alto contenido de carbono es rígido y duradero pero quebradizo y se oxida fácilmente, requiere limpieza y lubricación para prevenir el oxido.
Productos recomendados
Mex $178.00
Mex $ 101 .00 Mex $101.00
Mex $490.62
Mex $ 260 .00 Mex $260.00
Mex $353.00
Mex $ 176 .00 Mex $176.00