No hay artículos en el carro
No hay artículos en el carroConvertidor iluminar empotrado, convierte tu actual en un nuevo artefacto de iluminación empotrada puede colgar o lámpara de techo, empotrado puede ajustarse A cualquier tamaño entre 10,16 cm y 15,24 cm diámetro, incluye un medallón decorativo se puede pintar para combinar con tu decoración.
Christopher
Comentado en los Estados Unidos el 15 de febrero de 2025
The canned light converter worked great. Awesome value and was easy to install
John & Kelli
Comentado en los Estados Unidos el 19 de enero de 2025
Recommend for price, easy install.
EPicbonfires
Comentado en Canadá el 26 de febrero de 2024
Someone up the street put a tiffany-style stained glass pendant light out on free day and we brought it home with a plan. Put it over the kitchen island and make our sterile modern home have more character. This took my spouse all of 2 minutes to install. Remove the bulb, pull the can, seat the holder, throw the ring on and then wire the pendant up. A very cheap solution if you are even a little bit handy and now I have a GORGEOUS kitchen light.
Will Gale
Comentado en Canadá el 4 de octubre de 2024
It's a great quality thing to turn my pot lights into a light fixture. I've bought two, half a decade apart. Both of them were super easy to install. If I ever need to turn another into a different light I'd get another.
MPH in Texas
Comentado en los Estados Unidos el 24 de marzo de 2022
This can light converter works and is far less expensive than others I've seen on Amazon. It makes converting a can light to a pendant or chandelier easy.A couple notes on installation - you have to drill 2 self tapping screws into the existing can light outer wall to secure the new bracket that will hold the new light fixture. It's very sturdy once it's done but screwing it into the metal is challenging. I put the bracket where I wanted it and used a Sharpie to mark where I wanted the first screw to go. I then took a large nail and used it as a starter punch by hammering a dent into the mark. The dent made it so the screw didn't "walk" when I was trying to get it started. Even with that, I had to push hard on the drill and keep it going for about 20 seconds or so until the screw bit enough to go through the can. I did the same thing for the 2nd screw but didn't have to make a mark since I just put the nail in the middle of the screw hole on the opposite side of the bracket. You might have better luck with an actual metal punch.On sizing and centering the bracket, I did that before I drilled, but I assume you could do it after.The ceiling medallion/cover is fine but you might want to spray paint it since it's a shiny plastic white. I bought 2 aged bronze pendant lights with glass shades and used a couple of light coats of Rustoleum Universal to paint the top and bottom parts of the light fixture matte black. I used the same paint for the medallion and it all matches. If you want the medallion white to match your ceiling, depending on the color of your ceiling you still might consider spray painting it a matte or hammered white to cut down on the shiny white plastic look.The medallion is plenty wide enough to cover a 6 inch can light opening.Yes, I know the top of the fixture is not entirely centered in the medallion. I'll fix it, I swear. And ignore the popcorn ceiling, which remains the bane of my existence.
Productos recomendados
Mex $232.00
Mex $ 116 .00 Mex $116.00
Mex $420.67
Mex $ 231 .00 Mex $231.00
Mex $1,259.82
Mex $ 604 .00 Mex $604.00
Mex $354.84
Mex $ 177 .00 Mex $177.00