No hay artículos en el carro
No hay artículos en el carroMás información del producto
Estaciones de soldadura de 2 canales
Alto rendimiento
Las estaciones de soldadura WT2M son estaciones de soldadura de 2 canales con unidades de potencia de 150 W.
Pantalla LC multifuncional
Pantalla LC única con una visión general detallada de todas las funciones. Iluminación de fondo ajustable. El gráfico de barras de potencia permite la supervisión visual de la potencia de salida fácilmente legible desde la estación hasta la punta de soldadura.
Botón Nuevo Menú
Proporciona el mejor acceso fácil de usar y navegación de la estructura de menú.
Unidades apilables
Las estaciones de soldadura se pueden apilar entre sí para ahorrar espacio en el banco de trabajo.
Alimentación de 2 herramientas a la vez, la estación de soldadura multifuncional WT2M
Compatible con microherramientas y más
Alimentando 2 herramientas a la vez y embalando 150 W, el WT2M multifuncional de 2 canales es compatible con las herramientas de punta de cartucho de microsolder Weller y muchas otras herramientas de punta pasiva existentes.
Admite una amplia gama de herramientas utilizando puntas pasivas estándar (potencia combinada de hasta 150 W)La mejor cartera de su clase para obtener la herramienta adecuada para su aplicaciónProporciona un alto rendimiento mientras controla los costos
Lápiz de microsoldering
Tiempo de calentamiento extremo (2 a 6 segundos) Optimiza la transferencia de calor Tiempo de recuperación minimizado Cambio rápido y fácil de la punta
Pinzas microdesoldadoras
Cuenta con dos tiplets ajustables en paralelo que permiten la soldadura y dessoldadura de componentes SMD muy pequeñosCuando se conecta a la unidad de potencia, la herramienta es reconocida por la unidad de potencia y asigna el parámetro de control apropiado. La recalibración suele ser innecesaria.
- Canales: Dos (2)
- Potencia: 150 W
- Voltaje: 120 V/23 V
- Estabilidad de la temperatura: +/- 2 °C / 4 °C
- Rango de temperatura (varía entre herramientas): 50 °C a 550 °C
- Seguro para ESD: Sí
KN
Comentado en los Estados Unidos el 7 de junio de 2020
I learned "proper" soldering in summer school over 25 years ago, and have kept a decent soldering iron on hand ever since. My go-to favorite has been the for everything from small repairs around the house, to prototyping, to RC building.But I'd be lying if I said I wasn't awfully interested in a soldering station that cost nearly ten times as much. How could it be THAT much better? Well, as with everything, "it depends".For my day-to-day use, the Hakko is fine. Great, even, when you get into changing out the soldering tips. But you don't quite get to microsoldering with the FX-888D. You can change out tips and get close-ish on size, but when you want to do real microsoldering with Hakko gear, you need to move up to the [[ASIN:B00OBQGLGG FX-951] and by the time you've added a micro pen and tweezers, you're about halfway to what this costs. But that only gets you as far as "can I start doing microsoldering?"If you can swing it, this is so much better. And more in the "is it worth twice as much?" range. (Answer: yes.)Having two-channels in the space of one makes life a lot easier when you're working on a project that has different soldering needs. No waiting for the tip to cool down to switch it out, or putting unnecessary stress on your pen connections to swap out tools.This station also pushes out excellent power, where you're going to be able to touch just under 1,000 F if you need it. And the precision you get is +/- 4 F, which I've confirmed several times in thermal testing. Do I need such narrow tolerance? Well, no. But boy... do I like it.The jaw-dropper for me is how fast this reaches temperature. Under 10 seconds every time, and I'm good to go. That, combined with how removing and replacing small soldered IC's has been a total game-changer with the tweezers, have really impressed me. You don't really notice until you've used it a few times just how nice it is that the power unit is like "Hey, these are tweezers, and need to be treated differently."As part of a soldering ecosystem, the stackable setup is especially useful for being able to have multiple soldering solutions available, without giving up too much real estate in your work space.If you have a specific need for microsoldering -- so you're an RC enthusiast who is rebuilding ESC's instead of wiring them, or you're in to retro gaming so deeply that you're replacing PCB components, or you want to run a cell phone repair store -- this is completely awesome to have. Otherwise, I'm not sure it hits the marks you're going to look for if you're doing general soldering.
Jeff
Comentado en los Estados Unidos el 24 de marzo de 2020
My first "real" soldering iron (that is to say, not including the cheap $20 Chinese iron that was a nightmare and lasted one session before I got rid of it) was the excellent . I still have it, but I think I'll be giving it away now that I have the Weller. From a purely sensory perspective, I'll admit that the Hakko does feel like it's nicer, just because when you pick it up it feels like a solid piece of metal. The Weller feels like it's made of pieces. Not that it's not sturdy, because it certainly is... it's hard to explain. Like if you blindfolded my and handed me the Weller, I'd say "yeah this feels like something that I could probably disassemble, given the tools needed to do so." Whereas with the Hakko I'd say "you just handed me a solid chunk of steel, why?"Anyway, the Weller sees light use in my house, since I'm a tinkerer more than anything. Little arduino experiments, attempts to fix old cameras, etc. Of course it handles all of this admirably. It's probably extreme overkill to have this model when a much cheaper one would serve my needs just fine (like the Hakko), but I love using it all the same.
Ibrahim Awwad
Comentado en los Estados Unidos el 22 de noviembre de 2020
Great Product high quality product 👌 thanks
DisseminateJoy
Comentado en los Estados Unidos el 13 de diciembre de 2019
This is a really well thought out tool. You can connect two solder irons at once (and they have an extensive range, from standard soldering irons down to SMT tweezers). You set the temperature you want, wait a couple of seconds and start to work. The wire from the station to the iron is long and very flexible, so you will never have to "fight the wire" to get the iron into the exact position. The grip on the iron is very comfortable, even for long working sessions.A very pleasing tool to work with. An exceptional addition to my bench.
David A. Schwarzkopf
Comentado en los Estados Unidos el 6 de noviembre de 2019
Every part of this is solidly built; no cheap materials, no shortcuts. The unit itself is stackable and is designed to nest perfectly with Weller units that have a similar build. The screen and controls are all easy to read and work as intended; no guessing or frustration involved. I was not used to working with this much wattage, but the heat up/re-heat/ability to get larger parts to temp was all much faster/consistent than expected. Add in the high quality iron, and the rests that are built as well as the rest of this set, and you've got a professional grade set that won't disappoint.
Productos recomendados
Mex $709.33
Mex $ 361 .00 Mex $361.00
Mex $304.00
Mex $ 155 .00 Mex $155.00
Mex $1,318.00
Mex $ 619 .00 Mex $619.00
Mex $149.00
Mex $ 80 .00 Mex $80.00
Mex $547.76
Mex $ 246 .00 Mex $246.00