No hay artículos en el carro
No hay artículos en el carro
Sin retroceso. Acoplamiento metálico de una sola pieza. Para conectar el eje de torsión pequeño.
Absorción de desalineaciones angulares paralelas y juego final del eje por acción de resorte.
Ampliamente utilizado en sistemas de accionamiento para codificadores, instrumentación, tornillos de plomo, bombas pequeñas, rodillos de alimentación y en cualquier lugar de trabajo ligero a medio, se requiere acoplamiento torsionalmente flexible.
dany
Comentado en Canadá el 13 de agosto de 2024
bon
Quinton Ditmore
Comentado en los Estados Unidos el 9 de marzo de 2023
I used these for a robot. I connected a 1000 rpm 12V motor to a metal rod serving as an axle. They have a tight fit and don’t seem to slip. Something I didn’t expect, but that won’t hurt nor benefit my project, is these shafts are coiled in a way that they bend. I can see how this is useful for mild suspension or for printers, however one should know that these shafts bend before getting them, as for me, it was not obvious when I purchased them. The bend is about 10-15 degrees in each direction, and once pressure is relieved, it returns to a straight orientation. Gravity alone is not enough to bend these, but say they were used on a robot that weighed more than 7 pounds, I’m sure they would bend at the full 10-15 degrees, this depressing the base of the robot.
Brian W.
Comentado en los Estados Unidos el 4 de noviembre de 2022
These are a MUST have for your CNC or Laser. Should one break, your machine is down for the next few days, period. So is your cash flow. Spend a few extra and have them handy.Perfect fit for me. Be sure of the shaft sizes when ordering.
Carlos Adolfo Hernandez Carreon
Comentado en México el 17 de octubre de 2022
Excelente solución para un mecanismo previo cuya rigidez era inaceptable. Ahora se puede conseguir mejor desempeño en la aplicación del desplazamiento.
Ian Mazursky
Comentado en los Estados Unidos el 17 de septiembre de 2020
These 6x6.35mm flex couplings are working well for my application.I am using them between a motor shaft and an encoder.The motor is running up to 1000 RPM and the coupling is keeping up without an issue.I can definitely recommend them.
JB
Comentado en los Estados Unidos el 29 de julio de 2019
I’m using these to link a stepper motor with a telescope focus shaft. Exact alignment is nearly impossible without a metrology station, so it needed a little room for error, which is exactly what this gives!
Productos recomendados
Mex $258.00
Mex $ 129 .00 Mex $129.00
Mex $521.99
Mex $ 250 .00 Mex $250.00
Mex $325.89
Mex $ 159 .00 Mex $159.00
Mex $304.16
Mex $ 142 .00 Mex $142.00