No hay artículos en el carro
No hay artículos en el carro Este es un dispositivo RS232/485 adquisidor de datos / puerta de enlace IoT diseñada para entornos industriales. Combina múltiples funciones en uno, incluyendo servidor serie, puerta de enlace Modbus, puerta de enlace MQTT, puerto serie a cliente HTTPD, etc.
Esquema Fuente de alimentación: CC 6 36 V. Método de fuente de alimentación: puerto de alimentación DC 5.5, terminal de tornillo. Dimensiones (largo x ancho x alto): 84 x 64 x 24 mm.
Comunicación Ethernet--Conector RJ45 de negociación automática de 10/100M. WIFI--Cumple con 802.11b/g/n. Puerto serie: RS232 (ESD/EFT), RS485 (ESD/EFT/protección contra sobretensiones).
Especificaciones inalámbricas Banda de frecuencia: 2.412 2.484 GHz Red inalámbrica: estación / AP / AP+modo de estación. Mecanismo de seguridad--WPA-PSK / WPA2-PSK Tipo de cifrado: TKIP / AES
Potencia de transmisión 802.11b: +19dBm (máx. @11 Mbps) 802.11g: +18dBm (máx. @54Mbps) 802.11n: +17dBm (máx. @HT20, MCS7); +17dBm (máx. @HT40, MCS7)
Sensibilidad de recepción 802.11b: -89dBm (@11Mbps) 802.11g: -81dBm (@54Mbps) 802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)
Especificaciones de serie Baudrate: 300 460800 bps. Bit de paridad: ninguno, impar, par, marca, espacio. Bit de datos: 5 9 bits.
Software Protocolo--TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT Configuración: host, navegador web, comando serial AT Método de comunicación: comunicación directa TCP/IP, VCOM. Modo de funcionamiento: transmisión transparente, comando serie, cliente HTTPD, Modbus TCP a Modbus RTU
Requisito de entorno Temperatura de funcionamiento: -40℃ 85℃ Rango de humedad: 5% 95% de humedad relativa
Tutorial en línea/documento en línea: n9.cl/lxr1p
Contenido del paquete RS232/485 A WIFI ETH (B) x1 1 antena WiFi 2.4G. 1 hebilla de montaje en riel. 1 destornillador. 1 paquete de tornillos.
M. Adam Davis
Comentado en los Estados Unidos el 25 de junio de 2024
This seems to be the kitchen sink version of an rs-485 to network gateway. Even as an electronics, programming, and network expert I spent hours getting this to connect to and pass messages from a temp/humidity sensor to a python program on the same network.It appears to support some relatively complex use cases such as auto modbus polling and mqtt, or acting as either a client or a server, ap or station, etc, but I had to wade through the manual, wiki, and a few tutorials before I found a setup that gave me what I needed.Meanwhile it took me les than an hour to do the same with an off the shelf can transceiver and a pi pico.This is powerful and versatile, and I’m sure that with tech support or a forum I could do quite a bit with it, but I’m afraid I’m probably not going to use it. With nearly a dozen long configuration pages in the web interface and cryptic manual I’m just not interested in long term maintenance, having to look up everything every time I need to adjust it due to a new WiFi network name or modbus parameter change.
Customer
Comentado en los Estados Unidos el 17 de junio de 2024
As long as you know what you’re doing, this will get it done. No issues as of yet. Seems quality.
A. B.
Comentado en los Estados Unidos el 8 de diciembre de 2024
I've dreamed of a magic box I can plug in that gateways a serial port to TCP/IP ports or an MQTT server for a while now. Unfortunately, this thing isn't it: it's way too complex to set up and use, and I never successfully got it working for my application.It's a shame because the hardware is actually really nice - it's a well packaged box with convenient connectors, an external Wi-Fi antenna, clear labeling, and useful mounting points. Where this falls down is the software - configuration requires you to connect to its captive portal and know that it defaults to a random IP address of 10.10.100.254, and then it gets more confusing from there. There are a dizzying array of options, most of them unexplained and many not behaving as expected - it certainly seems like a module that should be able to do Everything, but the complexity is overwhelming.If you do decide to give this a try, you'll want to search for:Waveshare "RS232/485 TO WIFI POE ETH (B)" wikion your favorite search engine. This should reveal a detailed information page; then, scroll down to Document and click the User Manual link. If you can wade through all the details about AT+ commands and if your scenario is really simple, you might be able to make this work - but time is money, and this device requires a lot of time even if it's relatively affordable in price.
bdav129
Comentado en los Estados Unidos el 10 de noviembre de 2024
Inexpensive but be ready for a challenge figuring out how to get it to work. Documentation is lacking if you can find it on the internet. A lot of experimenting and still not 100% correct setup. Has Mqtt and HTTPD put options. Could not find a working driver for virtual comport operation at least for Win10.Price is on target for what you get.Good news is that I haven’t found it trying to “phone home” to China through my firewall so it doesn’t appear to be a malicious Chinese product.
Mic Ingram
Comentado en los Estados Unidos el 14 de octubre de 2024
Tried every setting to get the LAN to send over WIFI, I want remote access to a PLC which talks to the VFD and HMI over Ethernet. Can connect to the device over WiFi and adjust settings but the LAN port never became active. JUNK!( Although it may work with serial/modbus to LAN/wifi, did not try because it is not what i am looking for)
Productos recomendados
Mex $459.63
Mex $ 229 .00 Mex $229.00
Mex $2,139.84
Mex $ 941 .00 Mex $941.00
Mex $223.17
Mex $ 113 .00 Mex $113.00