No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Longitud y ancho ajustables
Con todos los diferentes modelos de PC en el mercado actual, diseñamos nuestros soportes para ser versátiles. Este soporte para CPU cuenta con pasadores de resorte que proporcionan 5 ajustes de altura únicos (14", 16", 18", 20", 22") y una perilla giratoria de bloqueo para ajustar el ancho de 5" a 10". Ajusta fácilmente el marco a la posición deseada para encontrar tu configuración preferida.
Construcción de acero resistente
Este soporte de alta resistencia fue construido para mayor resistencia, soportando hasta 60 libras de peso de forma segura debajo de tu escritorio. Descanse tranquilamente sabiendo que su costoso equipo tendrá el máximo apoyo en un lugar de fácil acceso.
Ahorro de espacio
Disfrute de espacio en el suelo que nunca antes había tenido cuando el PC se eleva a su nuevo hogar. Ahora puedes aprovechar el espacio de almacenamiento adicional para proyectos importantes, suministros o incluso decoración. Y la próxima vez que tu oficina tenga un concurso de área de trabajo ordenada, ¡estarás cubierto!
VIVO - Lo hacemos fácil.
Nuestro equipo de profesionales creativos ama convertir ideas innovadoras en soluciones asequibles que alegran tu día y fortalecen tu carrera.
Luna😊
Comentado en España el 25 de marzo de 2025
Me ha gustado mucho este soporte a comparacion de otros soportes que habia visto, tenia dudas si me iba a valer o si iba a soportar el peso de la PC pero no cabe duda que esta muy bien. Ya llevo unos meses y la PC va de maravilla con ese soporte ni se mueve.
Machine
Comentado en el Reino Unido el 11 de febrero de 2025
Wish I'd done it ages ago, looks miles neater. It's a bit more expensive than others, and I did end up using my own bolts for the top (see pictures) because I wanted to get it into my existing desk without utterly destroying the desk itself which is a solid bit of older hall furniture.After a bit of thought and wood-working I'm super happy with the results. Case is held securely, I can access the back easy enough just sitting underneath, and it's no longer sat on the floor looking messy.
Ben C.
Comentado en Australia el 9 de septiembre de 2024
It does the job. The curvature of the poles on the bottom mean that one end of my boxy PC tower sits on the curves (Phanteks Evolv) and as a result the PC doens't quite sit straight and is on a slight angle and with applied pressure on this curve (not ideal). It also mean's I can't reduce the gap between the mount and PC tower on this side. The foam really needs to extend around the entire base which would help with the pressure from the metal, and overall grip of the tower too.As other reviews have stated, the adjustment knob gets in the way and I wish there were more adjustment holes for height included too. These two combined mean I have a gap the size of the my hand between the desk and the PC tower.This does the job and overall is about what I expected, its holding my large PC tower which is more than others can say!(wood chips on the floor in the photo from wood-drilling & install - don't judge)
Ismael Verástegui
Comentado en México el 6 de septiembre de 2021
Más que perfecto!!!
Labyrinth-Maze
Comentado en Canadá el 15 de mayo de 2020
This thing is great!!!This thing is sturdy, easy to use, and looks good with my 5,1 Mac Pro and desk setup (goes right between and beneath the feet of the Mac Pro). It Accommodates the full travel height of my motorized standing desk without bottoming out (maybe 1” clearance under the feet of the 5,1 when down).Flip the tabletop upside down and tape the template to the tabletop squaring it up (so much easier than working under the table). Pre-drill the holes, then before you put the attachment screws in or set the mounting plate over the holes, drop a bit of epoxy glue in - maybe 1/3 to 1/2 of the hole depth - not too much that when the screw goes in it will create a mess. Set the mounting plate then tighten the screws snug-tight by hand with a screwdriver (no power drill).When you tighten the top support tubing threaded set-screws, push the top of the tower against the vertical tubing with the top sliding tubing and use one hand to hold it in place. You will need someone with a strong grip (or plumbing pliers) to tighten the set-screws in place with your other free hand.Before I purchased this I read that some people were complaining about the top tubing not staying in place, or that the set-screws sucked - put some elbow grease into it dude, these set-screws are perfect.
Ali Muzaffar Khan
Comentado en Australia el 2 de junio de 2019
Was very sceptical when ordered this, was not sure if this will hold. Let me tell you, it's holding and pretty well at that. Good quality build, although need 2 people to install if you got a heavy desktop like I do.
Productos recomendados
Mex $399.00
Mex $ 199 .00 Mex $199.00
Mex $430.61
Mex $ 206 .00 Mex $206.00
Mex $714.98
Mex $ 336 .00 Mex $336.00
Mex $479.00
Mex $ 234 .00 Mex $234.00