No hay artículos en el carro
No hay artículos en el carroColor:White MOUNT-VP01W is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2” to 12.5”. MOUNT-VP01W sits 6” from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish.Important Note: As mentioned above the mounting arms for this projector mount have a maximum reach of 12.5”. Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12.5” or less then this mount will fit your projector.CompatibilityFits most projectors on the market. Distance between mounting holes on back of projector must be 12.5” or lessHigh-grade steel supports projectors up to 30 lbsFeatures15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing anglesObscure mounting system holds your projector just 6” from the ceiling surfacePossesses quick release hooks that detach and attach by loosening and tightening mounting boltsQuick assembly and comes with common mounting hardware
Juan Pablo Cruz Uribe
Comentado en México el 20 de marzo de 2024
No sé si funciona o no simplemente lo regresé porque como se ve en las fotos el producto ya ha sido usado, se encuentra incompleto y en un pésimo estado. No tiene empaque ni presentación ni nada, solo viene en una bolsa.
T5mickb
Comentado en el Reino Unido el 14 de diciembre de 2024
Great value for money and does the job a treat.
Joep de Wit
Comentado en los Países Bajos el 19 de abril de 2024
Deze mount past goed op mijn BenQ beamer en voelt stevig aan. Fijn dat deze ook op 2 assen kan roteren zodat je door middel van deze mount je beamer altijd recht op je muur kan projecteren.
JL10190
Comentado en Francia el 24 de diciembre de 2023
Utilisé pour un projecteur Optoma (3points d’ancrage). Il suffit d’enlever un petit bras et de répartir judicieusement les trois restants. Les possibilités de réglages dans tous les axes sont très importantes. Dans mon cas je l’ai accroché dans un bureau au plafond mansardé ayant une pente de 45 degrés. Les fixations sont bonnes et la visserie est fournie. La stabilité est parfaite. L’universalité n’existant pas, ce support n’en est pas loin. Je recommande … pour un prix très correct.
Jorge
Comentado en España el 1 de septiembre de 2023
Se adapta perfectamente al proyector
Memo
Comentado en México el 22 de julio de 2021
Excelente te tamaño
Eduardo Ballesteros
Comentado en México el 30 de junio de 2021
Los materiales, son de buena calidad. Y se ven u funcionan correctamente.Recomiendo, ampliamente.
Rodrigo R
Comentado en México el 21 de octubre de 2021
Excelente producto
Ricardo Aguirre
Comentado en México el 26 de abril de 2021
Muy buen soporte para diferentes tipos de proyectores, Yo lo tengo en el techo y es muy estable!!! Trae diferentes tipos de agarres y tornillos y fue de muy fácil instalación!!
Angel
Comentado en México el 31 de agosto de 2020
Un poco corto, pero está bonito
PabloG
Comentado en México el 9 de diciembre de 2020
Funciona excelente , lo recomiendo ampliamente
David M.
Comentado en los Estados Unidos el 30 de agosto de 2017
Somewhat vague instruction sheet but since there is nothing difficult to figure out with this mount installation was very straightforward and easy once I figured out the best location for my projector. Adjustments are self explanatory when looking at the mount and making it fit your particular projector is not difficult because the legs that are used for attaching the projector can move in any direction and several sizes of screws as well as washers are included in the kit.Overall the mount looks nice with a white powder coated finish and zinc plated bolts. It would be nice if they included some sort of caps to cover the lag bolts which are used in my installation to secure the mount to the ceiling. In my case I used two lag bolts that screw through the drywall and into the lumber of the truss. I measured, marked and then drilled a pilot hole for each lag bolt and then screwed them in tightly. It is very solid.Most of the joints on the mount are fitted with nylon washers which allow you to just crack the allen cap screws slightly loose, scoot the mount to make an adjustment and then snug them back down again to hold everything firmly in place. It is simple yet it works surprisingly well.The mount does hang the projector slightly farther from the ceiling than I would have liked but it looks fine.I'm using the Benq HT2050 projector which shines 11ft to a Monoprice motorized 120 inch screen it looks really nice and watching movies is awesome.
Rorozco
Comentado en México el 25 de julio de 2017
Es un soporte con buenos acabados (metal y pintura)Las cuatro vías de ajuste lo hacen muy versátil para instalar un proyector, sobre todo en techos inclinados o irregulares.Yo los estoy usando para sostener las bocinas de los canales de posteriores de sourround que pesan 6 kilos.
Productos recomendados
Mex $524.30
Mex $ 272 .00 Mex $272.00
Mex $362.48
Mex $ 170 .00 Mex $170.00
Mex $263.00
Mex $ 134 .00 Mex $134.00