No hay artículos en el carro
No hay artículos en el carro
Este microscopio estéreo con zoom trinocular Vision Scientific es ideal para aplicaciones de laboratorio e industriales. Utilizando su alta resolución, gran profundidad y un gran campo de visión, es el instrumento perfecto para ver cualquier espécimen tridimensional u objetos grandes.
El bloque cruzado sólido y los insertos de latón mejoran el movimiento, mientras que el collar de fricción asegura la clavija y permite que el microscopio gire alrededor de un eje vertical. Sus funciones giratorias, giratorias e inclinables permiten cubrir áreas de visión amplias, horizontales y verticales; asegurándose de cumplir con sus requisitos de flexibilidad.
Empaquetado en una caja de espuma de poliestireno e incluye una cubierta antipolvo y un manual de instrucciones (idioma español no garantizado).
Especificaciones:
- Cabeza: Trinocular, 45° inclinado, gira 360°
- Ocular: 10x WF / 20 mm de alto punto de ojo
- Rango de zoom: 0.7x—4.5x, relación de zoom 1:6.4
- Rango de aumento: 7x—45x, 5x—90x con la lente auxiliar 0.5x y 2x
- Distancia de funcionamiento: hasta 8 pulgadas verticales; hasta 4 pulgadas ópticas; brazo de pluma de 20 pulgadas ajustable
- Enfoque: brazo de enfoque de piñón y cierre resistente con ajuste de tensión
- Soporte: soporte de brazo doble con brazo
- Fuente de luz: 144 luces LED con control de intensidad.
Lista de embalaje
- Cabezal de microscopio estéreo con zoom trinocular
- Par de 10 oculares WF.
- Soporte de brazo doble
- Brazo de enfoque
- Par de protectores oculares.
- Una cubierta antipolvo.
- Manual de usuario
- Lente auxiliar 0.5x y 2x
- Anillo de luz LED de 144 con control de intensidad
- Adaptador de corriente
Jrockstarz
Comentado en los Estados Unidos el 26 de mayo de 2023
No se pudo cargar el contenido.
Seabee
Comentado en los Estados Unidos el 18 de junio de 2022
I needed this for close-up jewelry work. Once adjusted for my eyes it works great. The light source is a dream compared to years ago and the depth of field with the standard lens gives a true image. The working distance of 100 mm allows tool and finger clearance and I can see exactly when I am shaping or moving metal and I can see precisely when my tool makes contact with a stone. Fully extended, the boom is too heavy for the base but it is easily fixed with more weight or a clamp. This scope will be very helpful to my work.
W.E.D.
Comentado en los Estados Unidos el 2 de diciembre de 2022
This overall design concept is well done, but with a few areas that are disappointing. It was well packed in thick styrofoam and arrived on time. The assembly instructions are very inadequate, and mostly just pictures. Ball bearings appear to not be lubricated, so I added a drop of very light oil to each and they now roll more smoothly. Parts were clean, but I had to take apart one clamp and file off a micro burr to get it all together. Also the knobs and clamp levers force their steel threads against the polished shafts, which will dent them, so I added little bits of nylon cut from wire ties between the shafts and the screw clamps. Optics are OK, but I am not yet able to properly adjust parfocal, so when you zoom it goes out of focus. Their limited optics setup instructions are not helping. I can't find ANY reference to a customer service center. No company name on the literature or address or website. The only option is to send it back to Amazon which I don't want to do. I don't recommend it as a training microscope because to use the camera mount you lose the image in the left eye, so it is not a true tri-focal 'scope. Focus and zoom knobs roll smoothly, but adjusting for inter-ocular spacing for different users is very stiff and said stiffness is not adjustable. The image is quite clear and sharp at all zoom levels. I haven't yet tried the two additional lenses for .5 and 2x magnification. Overall it may be one of the better choices in the mid-hundreds of dollars price level in America.
Customer
Comentado en los Estados Unidos el 13 de marzo de 2021
Good microscope for the money. I’ve been using this for watchmaking and it has performed very well. The controls are very smooth and the image is very wide. I have not use the camera function so I can’t comment on that. some of the bad things is it could be a little crisper with the Image but that could be me I do wear glasses and I need new ones. You have to watch if you fully extend the microscope the boom stand probably should be a little bit heavier but I will eventually mount it down anyway. The screw on the boom pole doesn’t have a bushing in it so I installed a nylon one which I read in someone else’s review. I’m giving it five stars because I went into it knowing this was a lower end microscope but I am impressed with what you get for the money.For a shop microscope or a student microscope I think it works very well. I know very little about these things I am just getting into microscopes so take it with a grain of salt but I’m very happy with it.
Shatta
Comentado en los Estados Unidos el 22 de febrero de 2021
This is a very complete package. The only thing missing is a camera. I will ne getting the 41mp hayear when I have the money. I am using this for pcb repair and the scope is phenomenal. I see no difference between this and the amscope costing $700+
Productos recomendados
Mex $13,205.26
Mex $ 1,881 .00 Mex $1,881.00
Mex $18,727.86
Mex $ 1,881 .00 Mex $1,881.00
Mex $3,480.00
Mex $ 1,740 .00 Mex $1,740.00
Mex $199.99
Mex $ 105 .00 Mex $105.00