No hay artículos en el carro
No hay artículos en el carro Parte trasera antideslizante
Funciona muy bien durante la fase de entrenamiento para ir al baño.
Funciona con la mayoría de sistemas de arnés
Ayuda a proteger contra accidentes de pañales cuando se coloca correctamente.
El rizo acolchado súper absorbente es suave al lado de la piel del niño.
Nota: Úselo con asiento infantil con sistema de arnés en su lugar. No permitas que este artículo o cualquier otro producto interfiera con el correcto funcionamiento de los sistemas de retención de asiento de coche o carriola.
Tilman
Comentado en los Estados Unidos el 20 de marzo de 2025
My review is not about the e290 in general (I do think it's a great product), just the unit I received in this order.It came to me with 2 of the buttons not fully soldered, and the antenna already plugged in. Looked like it had been used (and abused) and sold as new. I only realized this once I got a second one that was properly packaged.One thing that seems odd with this board is that the vbat reading on GPIO7 isn't reliable. Basically it still reads a value when the battery is disconncted and the value doesn't reflect a specific battery but instead be board specific (tested by switching multiple batteries and multiple boards). Afaict this is not documented well in current linked document.Three stars to reflect the shipping/packaging issues and acknowledge that there are documentation / sample code short comings.
Matt Calhoun
Comentado en los Estados Unidos el 20 de febrero de 2025
I am a firmware developer, creator of chatters.io. At the request of a user, I ported the ChatterBox node firmware to this heltec E290.I found this device very easy to work with, as you'd expect from esp32. The port only took about a day, starting with the already esp32 compatible codebase.The display is good sized and very clear, as you can see on the image. A full refresh takes a few seconds, so obviously don't do it constantly.The Lora radio works very well (I only tested 911-918 range). I'm using spiffs on a flash partition, that seems to be working just fine.The plug connector is used as I2C in my firmware, for GPS and/or RTC, and the plug works just fine.For the dec environment, I started out with heltec's custom board config for Arduino, but ended up just using the esp32 s3 dev config instead, and that worked better for my needs.I would definitely recommend this board for LoRa experimentation or mesh nodesI did not use Bluetooth or wifi, so can't review that functionality of the board.
Andy
Comentado en los Estados Unidos el 29 de enero de 2025
Works as it should
Phil D.
Comentado en los Estados Unidos el 28 de enero de 2025
This device works fine with Meshtastic. I did successfully add a GPS module to it and that seems to work fine as well. I do like the E-Ink display, I find it easier to read that some of the other smaller OLED screens and it seems to draw less power.
Designurelife
Comentado en los Estados Unidos el 30 de junio de 2024
I had a newly potty trained toddler test this out. I may as well poured a pitcher of water on my car seat. Doesn’t protect anything!
America Aguirre
Comentado en México el 29 de mayo de 2024
Util y fácil de lavar…5⭐️
Julia P
Comentado en los Estados Unidos el 22 de diciembre de 2024
I bought two of these to have in both cars. They saved us from cleaning out the car seats on two occasions.
Anne 1990
Comentado en los Estados Unidos el 14 de noviembre de 2024
This has made carseat clean up easier. Catches all the toddler crumbs and comes out with ease. Has held up well after multiple washes
EOW
Comentado en los Estados Unidos el 24 de agosto de 2023
We got this because our baby is the QUEEN of blowouts on car rides! Not even kidding every single car ride we would have a massive blowout and get it all over her self and car seat. I used to have to take the padding out and wash it all the time but we switched to a new car seat where I’m unable to take the lining out without taking the whole thing apart so we bought this. Oddly enough she stopped having blowouts when I bought this. But I do feel like it’s a great way to protect the car seat and it’s not too bulky where it interferes with having her buckled in safely. I also like that the back side is waterproof so I know nothing will seep through.
Brittney
Comentado en los Estados Unidos el 11 de abril de 2021
Still seeped through at times, but did a great job offsetting the damage lol. LO was still comfortable and it didn’t take up too much space.
Productos recomendados
Mex $2,920.00
Mex $ 1,430 .00 Mex $1,430.00