No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Encuentra varios tamaños. Haz clic en los enlaces a continuación:
Aplicación:
Este collar se utiliza para herramientas de torno CNC y máquinas de grabado. El collar debe colocarse en la tuerca del portabrocas antes de insertarlo en el portabrocas de pinza. Se utiliza con vástago recto, soporte de herramientas, tuerca de barra de extensión; se utiliza para sostener taladro, herramienta de taladro, herramienta de tallado y herramienta de escariado.
T
Comentado en Alemania el 29 de marzo de 2025
Preis Leistung top. Hat ein angenehmes Gewicht, wodurch es sehr hochwertig wirkt.
Ernest Bosch
Comentado en España el 2 de agosto de 2024
No lo cambio por ningún otro, va de lujo!!
Branko
Comentado en Alemania el 23 de julio de 2024
Great product
Pepe
Comentado en Australia el 2 de febrero de 2024
If your a coffee amateur like myself trying to use one of the pro hand tampers and your coffee turns out like crap because it's never level or tamper too hard etc then this is what u need.Perfect tamper every time and lifts your coffee game!!It's expensive but worth it, don't buy a cheap nasty version, spend the money so every time you drink the sweet nectar of caffeine pressed with this tamper you will thank yourself.Better investment than gold bars!
Ben C
Comentado en los Estados Unidos el 4 de diciembre de 2024
Picked this collet for use as a bullet puller for 50bmg along with a collet holder. Works great, though does leave a line in the bullet. Options for pullers made for this is nearly 6x the price vs this collet and holder.
DG
Comentado en los Estados Unidos el 22 de enero de 2024
I received the correct collet the next day. It appeared just like the one in the photo, complete with very visible machining marks. There was a pretty good ding above the retaining groove in the surface that mates to the nut. Using my Techniks, tool holder and collets I usually get around 0.0002" TIR. Out of the box this collet gave me 0.001" TIR. After touching up the swell around the ding with a fine diamond file, I was able to get the run out down to 0.0007".I am a hobbyist and therefore cannot afford premium tooling. I consider this collet a reasonable value for money and is adequate to my needs.
PeterS
Comentado en el Reino Unido el 27 de octubre de 2023
Excellent product.I have used about half a dozen tampers on a couple of different machines and this is by far the best.I will say that this is the most I have ever spent on a tamper but I do feel it was worth it.The mechanism is so smooth - the sound and results are satisfying.The tamper itself is sturdy and comes additional springs should you wish to reconfigure it.I would highly recommend this if you are using the tamper that comes with the Sage Barista Express
Rich Reel
Comentado en los Estados Unidos el 31 de mayo de 2021
I normally think of Uxcell as good, something of a name brand. This time they let me down. After many attempts to explain away the significant run-out I was seeing, it is for sure this new collet. The run-out was over 100um (0.004") which is way more than it should be. Looking closely I see some fairly rough grinding marks on the inner bore (that surface that grips the shaft of the bit) and some dings like an accidental bump into the saw during manufacture in a FEW places. It also felt "soft" as I was tightening it with my bit into my CNC spindle. Not even passable quality in my particular case.
Tedski
Comentado en Australia el 22 de agosto de 2020
I needed a collet to get from 1/2 inch (12.7mm) router bit shank to 12mm and this did the job real nicely.
Productos recomendados
Mex $266.00
Mex $ 140 .00 Mex $140.00
Mex $387.04
Mex $ 189 .00 Mex $189.00
Mex $654.65
Mex $ 314 .00 Mex $314.00
Mex $403.22
Mex $ 217 .00 Mex $217.00
Mex $718.00
Mex $ 394 .00 Mex $394.00
Mex $555.00
Mex $ 288 .00 Mex $288.00