El producto en teoría es muy bueno, el internet a través de la línea de corriente eléctrica se escucha bien; pero al menos en mi caso en la práctica no funcionó como esperaba, tengo contratado 150 megas en Infinitum, el modem está en la planta alta y requería internet estable en la planta baja; debo decir que instalar el dispositivo es muy fácil y la app es muy intuitiva; pero simplemente el internet no funcionó bien, únicamente me daba 30 Megas máximo y bajaba a 10 megas tanto por cable como por wifi, intenté cambiando los toma corrientes y ni así me daba un mejor internet, mi casa no es antigua tiene 3 años y la red eléctrica está bien, además debo decir que puse los dispositivos conectados en tomas de corriente directa (no extensiones) y funcionando solos sin tener otros aparatos conectados a la misma toma; hice la devolución del producto y me fue reembolsado el dinero; compré otro dispositivo y este es sensacional (Deco M4) ya lo reseñaré como corresponde.

Es muy fácil de instalar, lo instalé en casa de 2 pisos y no tuve problema con la conexión eléctrica. La velocidad del internet no se pierde para nada, siempre y cuando sigas las instrucciones de instalación. Cuenta con un configuraciones de seguridad que te permiten ver a las personas conectadas. Muy buen producto.

Compre el producto derivado de que en donde instale mi escritorio, no llegaba con calidad la red del módem. Había probado replicadores de red con antenas que habían servido para dos cosas.Desesperada por tener buena señal, me recomendaron comprar este replicador. Tiene un alcance muy bueno y es muy fácil de instalar. Lo "complicado" es andar probando en donde ubicar el replicador ya que son dos dispositivos. Uno debe ir conectado al módem y el otro debe estar a una distancia no tan lejos del primero. Sin embargo tienen buena calidad y la señal se replica sin problemas.Considero que si alguien piensa en comprar un replicador de red, sin duda debe optar por éste y no por los de antenas.

En general el producto es bueno da el ancho de banda por cable y una perdidad aceptale en 2.4G pero realmente malo para el WIFI 5g

This is a difficult review to write. There have been problems but I have yet to isolate the cause. I bought this product because my powerline adaptors were not working consistently so I decided to replace them with this product. I chose this particular product line because I have had good luck in the past with a tp-link router. Ironically, when I plugged Powerline adapter into the wall socket while it was connected to the router. The tp-link router failed. After some debugging and support from tp-link technical support, I decided that the router needed to be replaced. I ended up buying exactly the same model tp-link router. It is now running apparently with no issues. It took me quite a while then to get the tp-link Powerline adapter and extender working properly. Unplugging the adapter into the wall outlet the light that indicates the strength of the power coming from the socket was red. Tp-link technical support told me that that meant that the power in the house was inadequate. I refused to accept that. I changed the wall outlet and the red light turns green. During the socket swap, I did notice that one of the wire was slightly less tight than the others. Whether or not that was a factor, I do not know. Now that I have all green lights on both the Powerline adapter and the extender, I do have Wi-Fi signals that are inconsistent in their strength. I measure their strength using a Wi-Fi analyzer on my smartphone. There are times when I can see the signal just completely drop off line. At this time, I do not know why that is happening. I'm giving this product three stars because I am still diagnosing the problems that I am having. Of all the possible causes, interference seems the most likely. But figuring out what that interference is, is the trick.

This was perfect for me. I had a flaky WiFi connection to my TV in the living room. My router is in the office, 20 feet but through 2 walls, and I was getting interference from neighbors' routers as well. The TP-Link Adapter did the trick, I'm now getting a rock-solid "wired" connection to the TV and as a bonus enhanced WiFi signal in the living room, all the way to the sundeck. Not bad at all for $70!Installation was very easy, in fact, a real snap for the Ethernet connection. For the WiFi setup, it's very simple too, but *read the instructions* they are good and will greatly eliminate head-scratching ;-)Note of caution: you will probably not get a full 1,000Mbps bandwidth, the signal degrades rapidly in AC wires, particularly if you have an older house with lengths of wiring and many breaker jumps. In my case, I get a steady 70Mbps at the TV with an estimated 75 ft A/C wire run. But 70Mbps would be enough to watch movies in 8K (if they existed), so it's more than sufficient with your 4K TV, even if you have a couple of phones and laptops running on the WiFi at the same time.Thank you TP-Link, after all these years, you still make great products at great prices.

Dudé mucho antes de adquirir el producto porque la instalación eléctrica en casa no es muy nueva y los contactos del emisor y el receptor no están en la misma pastilla pero finalmente lo hice y no me arrepiento para nada. Tengo el módem en la planta baja y en el segundo piso la conexión WiFi siempre había sido muy inestable, sobre todo en el punto donde tengo conectada la televisión de la recámara y si alguien estaba viéndola con Netflix o similar, mi conexión WiFi en mi computadora se alentaba notoriamente.Con estos aparatos, ahora puedo conectar la televisión con el puerto ethernet de forma alámbrica; obtengo una señal estable y buena: cero problemas ya para ver Netflix y ya no se come el ancho de banda del WiFi para otros dispositivos.La instalación es rapidísima; no hay nada qué hacer más que conectar los aparatos. La guía menciona un proceso de pareo entre ambos aparatos pero creo que sólo es necesario si se quiere un segundo receptor y es por cuestiones de seguridad, por ejemplo, para que el vecino no se conecte a tu internet con un aparato receptor.

Se adquirió el producto buscando llevar conectividad a una cochera, que aunque algo cercana, no resultaba estable usando repetidores, las casas de los vecinos se interponen, la distancia era demasiada para un router 802.11ac, ya contaba con energía eléctrica suministrada desde la casa propietaria de la cochera (para que operara un motor de apertura de puerta) y tender cable Ethernet no era una idea bien recibida.Funcionó de maravilla, los gadgets que están en la cochera son tan estables como si estuvieran en la misma habitación donde se encuentra el router; la conectividad entre ambos dispositivos del kit ronda los 550 mbps y vía WiFi se tiene acceso a los mismos 100 mbps que entran al router, tras probar con Ookla Speedtest; a pesar de que la red eléctrica de esa casa ya tiene más de 40 años.Así de simple; un producto que recomendaría sin dudarlo cuando se tiene la certeza de que la red eléctrica del inmueble está bien.

The product seems to work. The instructions are awful. It looks like they ship the same instructions for similar products. For example, the instructions always say press and hold a button for one second. On my device that doesn't work. You just press and release the button with no pause. Installation went smoothly once I figured out this instruction error. Using the WPS button on my router made it easy to download my existing wireless SSID/Password settings to the new WIFI extender.One thing puzzles me... There are two parts to this kit: the small adapter, and the larger extender. The adapter connects to the router via ethernet and sends data through the powerlines. The larger extender sends/receives data from the powerline and also creates a WIFI network. The smaller adapter can also be used to create a remote ethernet connection. You can also connect multiple WIFI extenders, but I can't seem to find WIFI extenders for sale by themselves. That was sort of the whole point of using this device.

The kit includes a Powerline Adapter, Powerline Extender and two white 6 ft. Ethernet cables. It works, but you have to set it up correctly. First, a little background.My home is 3280 sq. ft. I have 100 Mbps internet using a Nighthawk router on level 2 of my home and actually have 100 Mbps all over my house. I didn't buy this kit to increase my wireless signal. I bought this kit, plus because I have three Tivo Mini's that connect via Coax for a MOCA connection. I constantly have connection issues related to signal quality.First thing out of the box I plugged in the Adapter, connected the ethernet cable to my router and pressed the WPS button on my router and the Wifi button on the Adapter. Then I took the Extender, plugged it in not only in a different room, but in a different level of my house. I tried to pair the two and failed. Then I started reading all of the reviews of the product and frankly got more confused because some people said you have to plug the adapter and extender into outlets on the same circuit BREAKER and other people said they didn't have to have the same circuit breaker, but the same PHASE. I was ready to box up and return everything. The instructions say "the same circuit". It's unclear what they actually mean by that, but it wouldn't make any sense for the answer to be circuit breaker, so I decided to start over. I'll explain the steps I took to successfully connect.1. Plugged adapter into wall outlet, level 2 (you CANNOT plug these into a power strip or even a surge device that covers the face of the outlet).2. Used a pin in the RESET hole (because I had set it up already incorrectly).3. Plugged extender into a nearby wall outlet in the same room.4. Pressed the PAIR button on the adapter.5. Pressed the PAIR button on the extender. (Both will flash and then you'll see two solid lights - one for power, one for paired)6. Unplugged both units. I set the extender aside and plugged the adapter back into its permanent home near the router.7. Used an 8 ft. ethernet cable to connect the router's LAN port to the adapter.8. Used my cell phone to see if I could pick up a WIFI signal for the 2.4 GHz and 5 GHz frequencies, which were there. (I didn't want to connect to these - I just wanted to see that there was a signal there)9. Pressed the WPS button on my router, followed by the WIFI button on the adapter. (The frequency lights will blink slow, then rapidly, then turn solid - my router's WPS button doesn't stay on long and while one of the frequencies was found quickly, the other took longer so I watched the WPS light on my router and as soon as it quit blinking, I quickly pressed it again so that both frequencies were found)10. Plugged the extender into an outlet in the same room to verify it was still paired - yep, two solid lights.11. Plugged the extender into an outlet in my office, level 1 - yep, two solid lights.12. Plugged one end of the provided ethernet cable into the extender and the other end into my iMac. Turned off Wifi on my iMac. Opened a web browser - yep, a page loaded. Performed an internet speed test. Tested >100 Mbps.13. Removed the extended from the outlet in my office and plugged it instead into an outlet in my bedroom (level1) near my Tivo mini - yep, two solid lights.14. Removed the coax cable from the mini and replaced it with the provided ethernet cable. Test - Able to watch live tv? Yes. Able to communicate with the Tivo Bolt on level 2? Yes. Able to connect to the Tivo service? Yes. Able to stream content? Yes.15. Took extender #2, plugged in outlet, level 2, same room as adapter.16. Pressed the PAIR button on the adapter.17. Pressed the PAIR button on the extender - yep, two solid lights.18. Repeated the process for extender #3, yep, two solid lights.19. Relocated the extenders near the mini's I needed to connect (one inside of a cabinet in my kitchen (level1) and the other in our home theatre (level 2). Both immediately showed the two solid lights.20. Connected them to the mini's using the provided ethernet cables and then tested the connections as I did before.All Tivo Mini's connected successfully and still getting >100 Mbps signal strength all over my house. So glad I bought these!

Buscaba una solución para tener WiFi en la 2da planta de mi casa por que lamentablemente los modem de fibra óptica de Telmex tienen pésima cobertura y en todas las recamaras de mi casa no llegaba nada pero al investigar esta tecnología PLC me llamo mucho la atención ya que la red eléctrica esta prácticamente nueva y sentí que podía ser una buena solución que tirar metros y metros de cable.Algo que me llamo mucho la atención es que decían en muchos sitios e inclusive en tienda Telmex donde igual lo busque el dispositivo que si los contactos estaban conectados a diferentes pastillas no funcionaria pero déjenme decirle que en mi caso si funciono la sala donde tengo el modem es una pastilla totalmente independiente a la planta alta y al menos que todo este interconectado de alguna manera funciono y la verdad muy bien.El paquete incluye los 2 dispositivos, instructivos muy claros de entender y 2 cables de Ethernet de buena calidad uno de ellos se usa a fuerza por que el modem debe conectarse por medio de Ethernet a un dispositivo, ya el otro dispositivo se conecta a donde queramos tener internet se emparejan y listo el PLC copia la red para que la conexión sea la misma en toda la casa y los dispositivos como celulares o tablets no estén cambie y cambie de red a cada rato todo un alivio.Las pruebas me dieron una conexión de 70mb de 100mb que tengo contratado algo curioso es que me da los 20mb de subida esos no se ven afectados pero la descarga no paso de esos 70mb supongo que ha de ser por el rollo de la pastilla pero la verdad con eso me conformo ya que en la planta alta no tenia ni una misera rayita de WiFi y ahora tengo todo al 100% y muy estable y excelente velocidad.Sin duda es un imperdible ya que es mas fácil y estético que andar tirando metros y metros de cable Ethernet y comprar repetidores o mover el modem a un lugar donde nadie se beneficia.

This device was unusable due to the fact that it doesn't play will with existing home network, it hijacks the DHCP server of the router and started acting as one with no setting to adjust it/or stop it. It literally put the whole network down except for already active devices. Also related to this it doesn't get the IP from the router, it insist on taking its own factory set network ip creating its own local network segment that cannot be modified??!So unless good firmware is provided it's better place is the trash. I wouldn't recommend it.