No hay artículos en el carro
No hay artículos en el carroPresentamos el interruptor inteligente de luz Wi-Fi Tapo Smart Light, atenuador, kit de 3 vías. Este kit de control de iluminación inteligente ofrece un control de brillo del 0 al 100%, manual, aplicación y control de voz con Siri, Amazon Alexa, Google Assistant o Samsung SmartThings. Establece horarios personalizados, disfruta de efectos de encendido/apagado y monitorea el uso de energía. Estas luces están diseñadas para atenuar los LED de eficiencia energética de hoy en día, así como las bombillas incandescentes tradicionales. Fácil configuración con Bluetooth y la aplicación Tapo. Consulta a un electricista certificado si no estás familiarizado con el cableado eléctrico. Perfecto para salas de estar, pasillos y escaleras. Este producto incluye 4M de memoria flash y un chip de memoria integrado, con un panel de visualización LED y diseño montado en la pared. Soporta una carga de potencia máxima de 15 A para uso general y 600 W para bombillas incandescentes, funciona con una fuente de alimentación de 100-120 V a 50/60 Hz. Para mayor seguridad, incluye autenticación de dos factores (2FA). Funciona en un rango de temperatura de -0 °F ~ 100 °F con una humedad de funcionamiento de 10 % ~ 90 % sin condensación. Se almacena en un rango de temperatura de -40 °F ~140 °F con una humedad de almacenamiento de 5 % ~ 90 % sin condensación. Este producto tiene certificación FCC, UL y RoHS. El paquete incluye 1 interruptor de atenuación inteligente Wi-Fi, 1 interruptor de atenuación satélite, 2 placas de pared, 5 tuercas de alambre, etiquetas de alambre y una guía de inicio rápido.
Chris DG
Comentado en los Estados Unidos el 4 de marzo de 2025
Works great with great instructions and solid app. Build quality is a on par with other comparable switches in the Market for Home Assistant and HomeKit. Integrated well with my Smart Home. I do miss the tactile feel of normal switches.
Kevin S.
Comentado en los Estados Unidos el 20 de febrero de 2025
Works as advertised. I use this and the other dimmer switches by TAPO with my Home assistant platform. Although I could not successfully register them with the matter instance I did end up using the TAPO app and then my TPLINK instance found them. The single dimmers are about a third of the price of this 3 way.
Jennifer L Queen
Comentado en los Estados Unidos el 2 de febrero de 2025
Finally, a matter compatible 3-way dimmer! Installing this was relatively easy. My situation had line and load in the same box, which is covered in the instructions. One thing to note is if you have this setup, the travelers must be attached to the same terminals on both switches (top to top, bottom to bottom). I initially had them switched and the dimmer was blinking at me indicating a wiring issues. This requirement isn't detailed very well in the instructions. Matter controls are limited to on/off/dimmer. Using the Tapo app you can setup things like if the led is on at nights, on/off transitions, and other items. Once set in the Tapo app, these will be reflected in the matter operation. Getting everything setup via Tapo and Matter were very easy.
Rob
Comentado en los Estados Unidos el 2 de abril de 2025
Easy installation and the supplied tags for the wiring made wiring up the three way switches easier. Excellent app accompanies this excellent smart switch. Alexa integration allows for voice control. App has additional features for energy monitoring, devices routines and others!
ML
Comentado en los Estados Unidos el 16 de diciembre de 2024
Three way switches are a little confusing to install unless you know what you're doing, and it took me a while to figure it out. I have 8 regular smart switches that I installed myself, but this one had me flummoxed for a few minutes. With 3 way switches, one of them has the hot wire and the other one has the load wire. I didn't realize that at first. I took down the existing switch, and as I looked at the wires, nothing matched up. After a while I realized that the TP Link switch I was holding was the switch with the hot connection, but the one I took down was the one with the load connection. When I took down the other switch, everything started to make sense. But if you're uncomfortable working with electricity, you might want to hire an electrician, or ask a crazy uncle to wire these up for you.Anyway, the switches work great, just like my other TP Link switches. And since this was a Matter switch, it was really easy to get it working with my Echo devices. AND... I can just say "Alexa, set living room light to "X" percent, and I can adjust the light without having to get out of my chair!
Productos recomendados
Mex $214.10
Mex $ 115 .00 Mex $115.00
Mex $378.95
Mex $ 204 .00 Mex $204.00