Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Touchless Toilet Flush Kit for Retrofit& Repair/Wave Sensor Dual-Flush Converter Replacement/ Motion Sensor Activated Flusher by TECHO

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,825.78

Mex $ 894 .00 Mex $894.00

En stock

Acerca de este artículo

  • Fácil actualización, instalación sencilla: solo tarda 10 minutos en actualizar fácilmente tu inodoro de mango a inodoro de descarga automática
  • Rango ajustable y salida de agua: ahorra agua. El sensor de techo no solo te permite ajustar el rango de detección, sino también la salida de agua.
  • Ahorro de energía y duradero: alimentado por 4 baterías AA, la energía utilizada en el lavado automático de inodoros = 800 descargas de Techo.
  • Práctico e higiénico: manos libres para enjuagar, mejorando la higiene con un sistema de descarga activado por sensor sin contacto.
  • Aplicaciones versátiles: este limpiador automático de inodoro es compatible con la mayoría de inodoros con solapa y tanque, por lo que es ideal tanto para uso doméstico como comercial.



Descripción del producto

Funciona con pilas, rango de sentencia de 8 pulgadas, instalación sin herramientas, kit de descarga de inodoro con sensor de movimiento automático

Funciona con pilas, rango de sentencia de 8 pulgadas, instalación sin herramientas, kit de descarga de inodoro con sensor de movimiento automático

1

Paso uno

Inserta el convexo en el sensor en la ranura de los soportes de metal.

2

Paso dos

Fija el clip de la cadena al conector de la rueda del driver.

3

Paso tres

Coloca el soporte en el borde del tanque del inodoro y asegúrate de que la rueda esté justo encima de la aleta del inodoro.

4

Paso cuatro

Fija la cadena que viene con el producto a la aleta

y ajusta la longitud de la cadena.

5

Paso cinco

Abre la caja de la batería y pon 4 pilas AA.

6

Paso Seis

Coloca la carcasa de la batería en la ranura de la batería del sensor

7

Paso siete

Conecta la carcasa de la batería y el sensor.

8.1

Paso Ocho

Junta el cable del sensor y el cable de la caja de la batería.

8.2

Paso Ocho

Coloque la unión de los cables en los conductos del driver.

9

Paso nueve

Coloca la almohadilla en cada esquina del borde del tanque.

10

Paso diez

Coloca el tanque de inodoro de nuevo.

11

Paso Once

Pegue la pegatina indicadora en la cubierta del tanque, intente colocar la pegatina justo encima del sensor.

Preguntas frecuentes


Scott
Comentado en los Estados Unidos el 25 de julio de 2024
Update: January 2025I rarely review products, and almost never return to update the reviews. This product is worth an update. In case you're stuck with the never-did-work Kohler touch flush toilets, this thing will fix your problems. I have two of these Kohler toilets. One worked pretty well, burning through batteries ever 3 to 4 months. The other went south pretty early, requiring four new AA batteries EVERY WEEK to 10 days. The "working" toilet start failing, which is when I decided to take the leap of faith (based in variable reviews), and buy these replacements. After six months, they work well. There is an optional sensitivity adjustment, which consists of two screws embedded into the circuit board, which are quite difficult to access and turn with a Phillips screwdriver. To flush one of two units , one almost had to put his hand right over the unit, a half inch above. The other worked better. I adjusted both, made them too sensitive, and now they flush as soon as you're in front of it, when you sit on the seat, when you scratch your nose, i.e. you get the picture. No big deal. I decided to wait until the batteries died, and then fix then both. Well, there's a problem with that plan. It's been seven months, and the batteries are still going strong. Because of my errant settings, these things probably flush 3x more than necessary. And yet, the batteries show no sign of failing yet. THAT'S AN OUTSTANDING IMPROVEMENT over Kohler's sh**t.I'm not sure how reliable these units will be over the long haul (per other reviews), but right now, they just work, they work well, and they work efficiently enough that the batteries seem to last forever.Increased review to 5 stars.Original Review (7/24):Bought this over a year ago, but didn't get it installed until early this year. Thus far, operates great. It's overly sensitive, i.e. it flushes when you sit down, when anything is within 2 feet over the top of the tank, but that can (should) be adjusted, I just haven't gotten around to trying.My concern: MOST of the recent reviews are highly NEGATIVE, and all cite the same thing, i.e. a non-responsive vendor. Well, I have a second Kohler touchless toilet, with their defective OEM crap auto flushers, which quit after 6 years (the other one lasted 6 months). There aren't many retrofit solutions out there (I think most Kohler owners are just dumping the toilet, and never buying Kohler again), so we'll give this a second try.I guarantee that I'll be updating this review every 3 to 6 months, to see how long this lasts. If this vendor/product deserve it, I'll write about it and update the rating to match.
Yimco
Comentado en Canadá el 15 de mayo de 2024
My wife and I went for a vacation in Hong Kong. For the first time in all our travels, we discovered the toilet in our hotel room had touchless automatic flushing. After doing your business, you just waved your hand above a sensor on the toilet tank and the toilet flushed automatically.When we got back home, my wife was determined to find this toilet upgrade, which is how I came across this product on Amazon.The device is not a complicated contraption. It is basically a motor controlled by electronics to turn half a circle to lift up the flap in the toilet tank, and then reverse itself after a set time to close the flap. The motor is activated by a microwave sensor built in the device.The device seems to be well made. The motor and electronics are enclosed in a plastic box with rubber gasket to keep it water-resistant. It is powered by 4 AA batteries. The batteries are installed in a separate housing that is also sealed with gasket. The two units are connected by a water-resistant coupler. The manufacturer claimed that the battery will last at least 6 months in an average household.Installation is relatively simple. The combination unit is hung on the wall of the water tank with a clamp. A little fiddling is required to adjust the length of the chain connecting the motor to the flap so it is just of the right length to allow the motor to fully open the flap.The sensitivity of the microwave sensor and the duration leaving the flap opened is adjustable. I made the mistake initially of adjusting the sensitivity before putting the water tank cover on; boy, the lid reduced the sensitivity tremendously! After re-adjusting the sensitivity, the unit then worked fine.Of note is I installed the unit in parallel to the mechanical flush handle. That means the toilet can still be flushed manually if the unit fails.The unit works like a charm since its installation. We now feel that touching the handle to flush the toilet after doing our business (before washing the hands which most of us do) is gross!End note: after installing this unit, we wanted to install the same in all toilets around the house; that's when I went shopping knowing what to look for. I was able to find identical units with a different brand name from a large budget department chain store as well as from a large electronic chain store for exactly half the price. The product, however, is only available for online shopping.
@theDavidLeach
Comentado en los Estados Unidos el 18 de octubre de 2023
I purchased this for a guest room toilet to remove the need for anyone to touch it to flush. Im a bit OCD with hygiene and with keeping the nice ToTo chrome toilet handle spotless and free of fingerprints.The product arrived quickly and packaged nicely to ensure safe transport.Installation was simple and made even easier by the included QR code that directs you to watch a short youtube install video. I slowed the video down to the slowest speed in order to keep up. Installation took me less than 5 minutes, no exaggeration.As others have mentioned it would be more ideal if the flush length could be extended to 7+ second, ideally up to a maximum of 10 seconds would be ideal. This means that when this device flushes, it can hold the flush valve open for a maximum of 7 seconds. There is a very small phillips screw that sets the length of time to keep the valve open. On my unit, the adjustment screw was covered in glue, a flick with a metal nail file was all that was needed to remove the glue but it should not have been covered. I had to locate a small enough phillips (ideally an electronics repair kit or eyeglass repair kit) that would fit in the tiny adjustment screw. It would be courteous for the manufacturer to have provided one but some people may not need to adjust the flush length at all. Default flush hold is 4-5 seconds long. I increased my unit to the maximum of 7 seconds which is sufficient to flush the toilet properly but ideally 9 seconds would have been better.From the description I was hoping that this unit could flush the toilet automatically when a guest moved away from the toilet or within some time set intervals, just to insure that the toilet is flushed on its own, with or without any usage. This unit does not do that. This unit solely provides a non-touch flush by motion sensor, you must wave your hand over the top of the toilet lid to activate the flush. The product comes with a chrome hand-wave sticker that you can place on top of your toilet to inform guests that they can just wave their hand over the toilet to flush it. The pickup sensitivity on the motion sensor has an adjustment screw, identical to the adjustment screw for the flush length, and is located right next to the flush length adjustment. I did not need to adjust the flush motion sensitivity.I have been using the unit for several months now and it has worked 100% of the time, still operating on the included 4 batteries.The unit makes no noise when activating a flush, if it does make a noise it is inaudible due to the flushing of the toilet.I would definitely recommend this to others.
Sergio Vega
Comentado en México el 22 de abril de 2022
Recomiendo que se tomen un tiempo a medir el espacio que tienen para que no les pase lo mismo que a mi. Sin remordimiento lo regresó porque no tenía apariencia de ser nuevo.
Arturo Peña
Comentado en México el 23 de junio de 2021
Excelente producto y excelente mi vendedor. Esta vez llego rápidamente y su funcionamiento es optimo
BLANCA
Comentado en España el 27 de abril de 2020
Funciona muy bien. Lo he instalado para una persona que tiene una discapacidad en los brazos y no puede tirar de la cadena tradicional. Es un gran invento y muy útil para las personas con discapacidades. Además, es muy higiénicoIba a comprar otro pero me he encontrado con la sorpresa de que lo han subido el triple.producto en este momento. Por favor, póngalo de nuevo a la venta para comprarlo de nuevo. 100 × 100 recomen a dormir como cambiar vale a dormir la opinión dable
Rob Smith
Comentado en el Reino Unido el 24 de mayo de 2018
Nice compact and clever device, fully recommend for elderly and anyone that may find flushing a toilet not so easy, as this makes it no effort.Easy to install, Easy to adjust to suit different install applications.
Productos recomendados

Mex $289.00

Mex $ 132 .00 Mex $132.00

5.0
Elegir

Mex $437.96

Mex $ 223 .00 Mex $223.00

4.9
Elegir

Mex $399.00

Mex $ 195 .00 Mex $195.00

5.0
Elegir

Mex $2,475.61

Mex $ 990 .00 Mex $990.00

4.7
Elegir

Mex $449.00

Mex $ 246 .00 Mex $246.00

4.3
Elegir