No hay artículos en el carro
No hay artículos en el carroHARDWARE PROFESIONAL PARA CAMA MURPHY
Avinash Agrawal
Comentado en India el 8 de febrero de 2025
The value of this product is not worth the price of the product. It is a Chinese gas pump and a metal product, not a US product brand. Therefore, we have returned it. This supply is delivered by itself and you will have to return it yourself. Therefore, please read the rules before purchasing.
Tahna Irvin
Comentado en los Estados Unidos el 22 de febrero de 2025
The Murphy bed kit was pretty easy to put together overall. The instructions show you how much material to purchase and how each piece is cut out of the sheets of plywood & lumber. The cut list was easy to read and understand, even for a novice woodworker or a do it yourselfer. You get a detailed cut list in the first book, and a detailed assembly with pics in the second book.We substituted hardwood for the bed rails and the head rails of the bed, to make a little smoother side rail.This is a great kit for a queen sized bed, you'll enjoy it.
linda
Comentado en los Estados Unidos el 23 de julio de 2024
It was nice have set instructions for this build. Please note there are typos in the instructions and the biggest issue for me was the nylon spacers. Thank you to the other person in the reviews that mentioned it. We had to shave/ sand down our spacers by half the size otherwise it will cause the outer frame to bow out and warp like crazy. I am happy with the end result but it took us a few days to realize it was the spacers that cause the frame to warp. Another thing that I can’t seem to figure out is that our bed frame doesn’t close all the way. I need to add a latch at the top to keep it 100% close. I’m not sure if it’s the suspension or what but it just doesn’t close. I know that it’s not the bed stoppers since we tried taking it out.
Courtney Wosepka
Comentado en los Estados Unidos el 1 de septiembre de 2024
There are issues with the included gas springs, washers, ball studs, and machine screws, and instructions.The included gas springs should be holding the bed up flush against the wall but as stated by many other reviewers, the bed sags or does not close completely. The instructions state that if the bed sags, it means the ball studs for the gas springs were incorrectly placed however, after double checking the instructions, the ball studs were in fact correctly placed within 1/16th of an inch. It seems likely that many recent kits are being shipped with shorter (perhaps cheaper?) gas springs than what the instructions were written for. To make matters worse, if the bed is pushed flush against the wall, the gas springs will occasionally pop out creating a substantial safety hazard for my kids. The bed weighs over 100lb.The washers for the bed pivot are incorrectly sized. Other reviewers have resorted to cutting them.The machine screws are too thick to tightly fasten plates holding the ball joints to the 3/4 inch plywood. As a result, there is a fair amount of play. I wouldn't be surprised if they work their way out over time, again creating a safety hazard.The ball studs are not securely fastened to the ball plates. I had to tighten the lower ball studs with a pair of wrenches. The gas springs would otherwise pop out very frequently.Finally, the instructions are truly awful. The measurements for the bed stopper are in
Brian Berg
Comentado en los Estados Unidos el 26 de abril de 2024
No se pudo cargar el contenido.
Productos recomendados
Mex $6,299.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,660.36
Mex $ 1,143 .00 Mex $1,143.00
Mex $6,807.92
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,499.89
Mex $ 1,024 .00 Mex $1,024.00