No hay artículos en el carro
No hay artículos en el carro toolant Stubby - carraca de cabeza flexible de 3/8 pulgadas, llave de carraca compacta de 90 dientes, longitud de 4.7 pulgadas
Par de torsión a prueba:
carraca de transmisión de 1/4 pulgadas: el par a prueba ASME es de 41.7 lbf-ft, mientras que nuestro par a prueba de herramientas es de 60 lbf-ft.
carraca de transmisión de 3/8 pulgadas: el par a prueba ASME es de 150 Ibf-ft, mientras que nuestro par a prueba de herramientas es de 240 Ibf-ft.
carraca de transmisión de 1/2 pulgadas: el par a prueba ASME es de 375Ibf-ft, mientras que nuestro par a prueba de herramientas es de 560Ibf-ft.
Durabilidad:
El estándar ASME es 50.000 veces de vida útil, el útil es de hasta 75.000 veces y más.
Angel
Comentado en los Estados Unidos el 16 de marzo de 2025
I ordered this ratchet as I needed a ⅜ stubby that could fit in a tight spot in my car. When I first received it, it was bone dry, not smooth at all, and had huge backdrag. However, I opened it up, cleaned up the internals, and added engine lube into it. I didn't use grease as it is a 90T ratchet, engine lube would make it slide more easily and lessen the backdrag. After doing all that and ratcheting it for a while to make the lube spread out onto all the internals, it became buttery smooth and had no backdrag anymore. What I like about this ratchet is the size and compact flexhead so I can easily bend it to any way. The only issue I have with it is the directional switch, it slips on my finger a bit and not sure for how long it would last for.
Matthew Paradis
Comentado en los Estados Unidos el 15 de marzo de 2025
This ratchet is pretty good. It holds sockets well, and its single pawl 90 tooth design (I verified that by opening it up) makes it strong. It isn’t the smoothest ratchet action, although i suspect it will wear in a bit. The biggest con is the high amount of back drag. The sealed head design is easy to maintain because you just need to remove two screws for cleaning and lubrication. The tilt function has strong detents to hold it in whatever position you choose. For the money this is good value and works well.
Titus
Comentado en los Estados Unidos el 15 de marzo de 2025
Nice little stubby ratchet that works well. It comes in a foam organizer to help organize your tool box if you want.I had one small issue, when I first opened it up, the ratchet was frozen solid. I could not turn the ratchet at all and could not move the direction switch. I had to clamp it in the vice and tap it with a mallet to break it loose. After that, it worked well and has worked fine since without issue.
D. Engel
Comentado en los Estados Unidos el 13 de marzo de 2025
It is nice and stubby with a flex head, nice enough finish. Not a fan of the way the flex head works with the detents, but I knew that going in.
Konto_von_mir
Comentado en los Estados Unidos el 19 de abril de 2025
The ratchet is of decent quality and super helpful to get you out of a tricky situation. The flex head function is good, but what I'm not perfectly happy with is that the ratcheting mechanism is a little stiff and sticky. Maybe I need to use it over an extended period of time. It's not a snap-on or matco, but it'll do the job just fine at significantly lower cost.
Productos recomendados
Mex $167.77
Mex $ 83 .00 Mex $83.00
Mex $3,312.60
Mex $ 1,623 .00 Mex $1,623.00