No hay artículos en el carro
No hay artículos en el carro
Esta caja mate de fibra de carbono de 4 x 5.65 está diseñada para sujetar directamente a lentes de cine de tamaño estándar para ser lo más ligera y discreta posible.
Incluye múltiples anillos adaptadores de lente para adaptarse a la mayoría de tamaños frontales estándar.
Los respaldos de tamaño adicional se pueden comprar por separado.
Estos anillos adaptadores no solo permiten que la caja mate se fije directamente a la lente, sino que renuncia a la necesidad de rosquillas.
El paquete incluye una bandera francesa superior para proporcionar protección contra llamaradas.
También incluye un accesorio de varilla de 15 mm si deseas montar la caja mate a través de LWSrods.
Lista de embalaje:
1. 1 cuerpo de fibra de carbono.
2. 4 marcos de filtro de 5.65 x 3
3. 1 bandera francesa superior.
4. 1 adaptador de varilla LWS de 15 mm.
5. Ф134 mm, 114 mm, 110 mm, 95 mm, 80 mm accesorios de abrazadera
6. (5) mate duro (16-20 mm, 24-28 mm, 32-35 mm, 50-85 mm, 85-180 mm) x5
Material: fibra de carbono, aleación de aluminio, acero inoxidable.
Color: negro.
Sistema de varilla: 15 mmLWS
Anthony
Comentado en España el 31 de octubre de 2024
Even though I was aware of potential issues from reading other reviews, I dropped a filter on my first use of this matte box. The filter tray design is unfortunately terrible. When you place a filter in, the whole assembly becomes quite heavy, and if you even slightly drop it while inserting (by just half a centimeter), the filter slides straight through and falls to the ground. Lovely!Luckily, my filter didn’t break, but the filter support bent slightly (the support is actually quite thin). I had to manually reshape it to fit back into place. What a great first experience with the Tilta MB-T12!Following that, I tried moving my 15mm rods forward (to prevent filters from slipping through) and attaching the support directly to the rods. And guess what? The support is too short! I had to forcibly tilt the lens down to make everything fit. Brilliant design…These two issues cost three stars for me. Without them, it would have been absolutely perfect. As for the build quality, it’s as excellent as Tilta’s other products—top-notch!Good quality, poor design = average product. Consider yourself warned.
R. Kittle
Comentado en los Estados Unidos el 7 de septiembre de 2023
I really love this matte box; it's lightweight (compared to my O-Box), built well, etc.But... I hate "clip-on" matte boxes because they slow me down having to take this off a lens, put it somewhere, put the new lens on, then put this back on. It's annoying. Also, I hate the idea of my $10K lens having a metal ring around it that can scratch the outside of it. With that said, I bought this because it came with the 15mm rail mount. However... the "riser" piece is ridiculously small. It's only half an inch of movement. Why even bother, then, with a riser? Just make it like every other brand's, with about 1-2" of movement if needed? I bought this mostly for my 114mm lenses and it's half and inch too low. For the even wider lenses, it's not even close. I emailed Tilta about it and they were basically like, yeah, sorry, but it is what it is. Because of their mounting points, you don't have any real third party options. But, if you want a clip-on matte box, this doesn't even matter.Also... I made the mistake of ordering this kit for $300 more than it needs to be. I only really needed on lens size and the others, I'll never use, as well as the front pieces. Just get the $250ish version, honestly... then buy the extra pieces for the different lenses as you go, if you really need them. You won't though.On the positive... they don't mention it but I was concerned about not being able to use 4x4" filters if I wanted to. Other matter boxes have trays for both sizes. This looks like it's only 4x5.65"... but, those 4x5.65" trays have slots for 4x4" filters too! No sliding back and forth, nice and snug left and right. That surprised me and I think it's a big selling point.
Michael A. Thomas
Comentado en los Estados Unidos el 7 de marzo de 2021
Really excellent matte box with proper *metal* filter holders and three stages, and an LWS support, the latter of which I strongly recommend be put to use. I’m running an integrated VND setup that takes two stages, and can then use the third for a mist filter, etc. This ends up being a fairly heavy setup, so the jury is out for run-and-gun, but if balanced with a battery might not be bad.(I was considering the Polarpro system for similar functionality, but a) it was unavailable at the time of this review I guess due to supply chain issues, and b) proprietary filter systems suck, IMO. The argument *for* the Polarpro setup is that its all-inclusive config is still cheaper than this box + equivalent filters, and it is lighter.)This item Includes several “backs” for different lens diameters, and this in my opinion is the right approach for those that run matching sets of cine lenses. You don’t want to have to adapt all your same-diameter lenses, you just want to adapt the matte box to your lens kit. Of course you can also still choose to adapt different-diameter lenses to a given back, but you’d need to find and buy the rings do to it.Also includes the folding top flag and a series of hard mattes for a variety of focal lengths. The top flag has non-adjustable angled sides for more coverage, so won’t be all that convenient to leave on full-time, and thus it won’t be that useful as a “lens cap”, for my intended purposes. I’m going to try just using a hard matte rather than the top flag and see how things go.
Kreyol Productions LLC
Comentado en los Estados Unidos el 11 de agosto de 2020
More than what I was expected
Waguila
Comentado en los Estados Unidos el 21 de septiembre de 2019
For the price I paid it behaves and feels like an arri Matebox. Very good finish, carbon fiber makes light as a feather. Good job tilta
Productos recomendados
Mex $1,070.00
Mex $ 524 .00 Mex $524.00
Mex $10,819.99
Mex $ 1,881 .00 Mex $1,881.00