No hay artículos en el carro
No hay artículos en el carrosevans
Comentado en los Estados Unidos el 21 de marzo de 2025
Excellent drawers. Even better when on sale!I bought [2] 2U and [2] 3U drawers. They fit perfectly into the 15U TecMojo rack. I bought these before they were advertising the rear support rails yet all my drawers came with them. My rack isn't set up for rear support rails so I drilled holes in the rear vertical rails to accommodate. I used the 12-24 screws and cage nuts on the rear support rails and 12-24 screws on the front vertical rails.I didn't get my holes perfect so you can see in the picture that several rails don't fit flush with the drawers. I might add additional sheet metal screws to fix that problem. It has no affect on the operation of the drawers.The screws are good quality and you'd shouldn't have a problem with them stripping IF you use the proper screwdriver. Don't use a common #2 Phillips screwdriver. I used a #3 Phillips screwdriver and had no problems with any of the screws. I took my time and did NOT use a power drill with a screw tip.As another reviewer pointed out, the alignment on one of the drawers is a little off. It's more noticeable in the picture than it actually is.The clearance height on the 3U drawers is just shy of 4-15/16" and just shy of 3-1/8" on the 2U drawers.I'm real happy with these drawers and hope you found my experience helpful.
Michele Cottrell
Comentado en los Estados Unidos el 7 de abril de 2025
Fit my mobile DJ rack perfectly. Added a generic foam insert from another mfg here on Amazon. Able to fit all 4 of my wireless microphones, the 2 1/2 Wave antennas for the receiever, and a dozen AA batteries with no issues. The detent holding capability of the shelf is rather weak. Not an issue in my case and if concerned about it sliding open during transport just lock it with the provided keys. Would recommend.
O
Comentado en los Estados Unidos el 25 de abril de 2025
Good drawer for the price. It’s been on tour 3 weeks so far and holding up fine. Main complaint is that it doesn’t stay closed without being locked with a key.
Hassan
Comentado en Canadá el 10 de diciembre de 2024
Nice 4u rack drawer, no issues with fit and finish.
Hofner Guy
Comentado en los Estados Unidos el 28 de octubre de 2024
I really felt the urge to write this review after I purchased the 4U drawer and installed it today. I installed it in my rack above another brand's 4U model GRW-DRWDF4 I had purchased from SWS. This review is also a bit of a comparrison. In total I have two racks with 5 drawers, 4 are higher-end drawers and this one being the least expensive. While this one is just about an inch shorter front to back (and I knew that prior to purchase) than the GRW-DRWDF4, I really like the smooth (no exposed bolts for rail) internals of this drawer and it just pulls and closes so much smoother and easier. Its not a thick metal as the GRW-DRWDF4 but is still completely solid construction and not at all flimsy or thin. The GRW-DRWDF4 may be over built for a home studio like mine where I just want good solid drawers. This one exceeded my expectations. Hope it continues to perform.I see the reviews regarding concerns on packaging and can see why these drawers may get bent in shipping because there is only some flimsy styrofoam between it and the box wall. I was lucky to get one with no damage but see how that is completely possible. They should pack them better or double box them. Having said that I would still roll the dice on that point and order another one of these if I needed to versus getting a GRW-DRWDF4 or something similar to a GRW-DRWDF4 at more the double the price.
Productos recomendados